zł1,722.68 tax excl.
The industrial cellular router uses two independent LTE Cat 6 modems, allowing two simultaneous cellular connections. Load balancing, Dual SIM, five Gigabit Ethernet ports, Wi-Fi 5, Bluetooth Low Energy, and GNSS support applications requiring redundant and highly available network connectivity. Teltonika RUTX12
Teltonika RUTX12 integrates two LTE Cat 6 modems and supports two simultaneous cellular connections. The manufacturer specifies a combined cellular throughput of up to 600 Mbps when both modems are used. Load balancing can distribute traffic across available WAN connections, while Dual SIM support enables automatic switching and redundancy scenarios.
The router provides five Gigabit Ethernet ports and dual-band Wi-Fi 5 based on IEEE 802.11ac Wave 2. Bluetooth Low Energy and GNSS extend integration options for wireless devices and positioning systems. RutOS provides routing, VPN, and network management functions, while Teltonika RMS enables remote monitoring and administration.
Data sheet
The embedded IoT gateway provides LTE Cat 4 connectivity, Gigabit Ethernet, routing functions, and support for industrial communication protocols. RutOS and Teltonika RMS enable remote configuration, monitoring, and integration with OEM and industrial systems. Teltonika EBG140 OXA
Outdoor industrial router for providing mobile connectivity in installations operating outside buildings; 4G LTE Cat 4 with speeds up to 150 Mbps; 3G and 2G; Dual SIM with automatic switching; IP55 ingress protection; 2 x 10/100 Mbps Ethernet ports; PoE In 802.3af/at; PoE Out 802.3af Alternative B up to 15 W; 2 integrated mobile antennas; integrated mounting bracket; RutOS operating system; Teltonika RMS support. Teltonika OTD140
Outdoor industrial router for providing mobile and WiFi connectivity in installations operating outside buildings; 4G LTE Cat 4 with speeds up to 150 Mbps; WiFi 4 802.11b/g/n in Access Point and Station modes; up to 100 simultaneous WiFi connections; Dual SIM with automatic switching; IP55 ingress protection; 2 x 10/100 Mbps Ethernet ports; PoE In 802.3af/at; PoE Out 802.3af Alternative B up to 15 W; integrated mounting bracket; RutOS operating system; Teltonika RMS support. Teltonika OTD144
No product available!
Outdoor industrial router for providing high-speed mobile connectivity in installations operating outside buildings; 5G Sub-6 GHz SA/NSA with download speeds up to 3.4 Gbps; 4G LTE Cat 19 up to 1.6 Gbps; 3G; Dual SIM with automatic switching; eSIM™ with support for up to 7 profiles; IP55 ingress protection; 2 x Gigabit Ethernet ports; PoE In 802.3af/at; PoE Out 802.3af Alternative B up to 15 W; 4 integrated mobile antennas; integrated mounting bracket; RutOS operating system; Teltonika RMS support. Teltonika OTD500
Industrial cellular router for providing primary or backup network connectivity in automation systems and industrial installations; 4G LTE Cat 4 up to 150 Mbps; 3G and 2G; WiFi 4 802.11b/g/n; up to 50 simultaneous WiFi connections; 1 x 10/100 Mbps WAN port; 1 x 10/100 Mbps LAN port; automatic WAN Failover; digital input and output; Modbus TCP, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; passive PoE 9-30 VDC; RutOS operating system; Teltonika RMS support. Teltonika RUT200
No product available!
Compact industrial cellular router for maintaining continuous connectivity in automation systems, industrial installations and remote monitoring; 4G LTE Cat 4 up to 150 Mbps; 3G and 2G; Dual SIM with automatic switching; 1 x 10/100 Mbps WAN port; 1 x 10/100 Mbps LAN port; WiFi 4 802.11b/g/n; up to 50 simultaneous WiFi connections; Modbus TCP, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; passive PoE 9-30 VDC; aluminium housing; RutOS operating system; Teltonika RMS support. Teltonika RUT202
No product available!
Industrial cellular router for direct transmission of CAN/CAN FD data to IP networks; 4G LTE Cat 4 up to 150 Mbps; 3G and 2G; Dual SIM with automatic switching; native CAN interface; RS232; GNSS; WiFi 4; 1 x WAN and 1 x LAN 10/100 Mbps port; active PoE In 802.3af; 9-57 VDC power input; microSD slot up to 2 TB; RutOS operating system; Teltonika RMS support. Teltonika RUT204
No product available!
Industrial cellular router for communication with automation equipment and M2M systems; 4G LTE Cat 4 up to 150 Mbps; 3G and 2G; Dual SIM with automatic switching; RS232 and RS485; WiFi 4; 1 x WAN and 1 x LAN 10/100 Mbps; active 802.3af PoE In and passive PoE; 9-57 VDC power supply; microSD slot up to 2 TB; Modbus RTU/TCP, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; RutOS operating system; Teltonika RMS support. Teltonika RUT206
Industrial cellular router for IoT, M2M and automation systems, supporting 4G LTE Cat 4 up to 150 Mbps, 3G and 2G. The RUT241 provides WiFi 4, a Mini SIM slot, 10/100 Mbps WAN and LAN ports, automatic WAN Failover, digital input and output, and 9-30 VDC passive PoE. RutOS supports VPN, Teltonika RMS and industrial and IoT protocols, including Modbus TCP, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT. Teltonika RUT241
No product available!
The industrial cellular router provides LTE Cat 6 connectivity, Wi-Fi, and wired Ethernet networking. WAN failover supports automatic switching to an available backup connection, while RutOS provides network management, VPN, and industrial communication functions. Teltonika RUT260
The industrial cellular router provides 4G LTE Cat 6 connectivity, 2.4 GHz Wi-Fi, and wired Ethernet networking. Two RJ45 ports, one digital input, one digital output, and Teltonika RMS support enable integration with industrial, IoT, and remote management applications. Teltonika RUT261
No product available!
The industrial cellular router provides 5G RedCap connectivity with 5G Standalone support and backward compatibility with 4G LTE Cat 4 networks. Wi-Fi, two 10/100 Mbps Ethernet ports, and WAN failover support integration with industrial and IoT systems requiring reliable primary and backup network access. Teltonika RUT271
The industrial cellular router provides 5G RedCap and 4G connectivity together with 2.4 GHz Wi-Fi. RS232 and RS485 interfaces, Dual SIM support, automatic failover, and industrial communication protocols enable integration with IIoT, M2M, and industrial automation systems. Teltonika RUT276
The industrial cellular router provides LTE Cat 4 connectivity, 2.4 GHz Wi-Fi, and support for both a physical SIM card and eSIM. WAN failover, load balancing, and eSIM Bootstrap support network redundancy and remote operator profile deployment in industrial and IoT applications. Teltonika RUT281
The industrial cellular router provides LTE Cat 4 connectivity with 3G and 2G fallback support. RS232 and RS485 interfaces, Wi-Fi connectivity, PoE support, and industrial communication protocols enable integration with automation equipment, M2M systems, and IoT installations. Teltonika RUT286
Industrial cellular router for providing fast and redundant connectivity in IoT, M2M and automation systems; 4G LTE Cat 6 up to 300 Mbps with carrier aggregation; 3G; WiFi 4 802.11b/g/n 2x2 MIMO; 1 x WAN and 1 x LAN 10/100 Mbps; automatic WAN Failover; up to 2 configurable digital I/O; Modbus TCP, DNP3, DLMS/COSEM, OPC UA, BACnet and MQTT; 9-30 VDC power supply; RutOS operating system; Teltonika RMS support. Teltonika RUT361
The industrial cellular router uses two independent LTE Cat 6 modems, allowing two simultaneous cellular connections. Load balancing, Dual SIM, five Gigabit Ethernet ports, Wi-Fi 5, Bluetooth Low Energy, and GNSS support applications requiring redundant and highly available network connectivity. Teltonika RUTX12