KYX-1057BS - 5x7 LED matrix of 3mm red diodes (common anode)

COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 1200 mA, offering a wide beam angle of 120 °

Adafruit 1463

Module of four integrated 8x8 LED (color red) matrixes based on the MAX7219 controller. Module controlled by the SPI interface.

COB LED ring, made of aluminum PCB, emits cold white light (6000-6500k) at 12 V DC with a maximum current consumption of 800 mA, offering a wide beam angle of 120 °

Module with 117x7 LED matrix display (77 LEDs). It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM442

Module with 17x7 LED matrix display (119 LEDs) designed to work with the Raspberry Pi. It uses the IS31FL3731 driver and communicates via the I2C interface. Pimoroni PIM336

This is the tiniest little LED grid, with 64 full RGB color pixels in a square. For use with Arduino and Raspberry Pi. Adafruit 3444

COB LED ring, made of aluminum PCB, emits warm white light (2800-3000k) at 12 V DC with a maximum current consumption of 800 mA, offering a wide beam angle of 120 °

KAmodWS2812-1 is a module with WS2812 multicolor LED. Thanks to the embedded controller, LED can be series connected to makes an amazing light effects. KAmodWS2812-1

LED diode 10LED two-colored - bargraph, ultra-10mcd (4mA) - max: 40mcd (20mA), ultragreen 10mcd 4mA) - max: 40mcd (20mA)

Ring light with 16 RGB diodes WS2812B type controlled by serial signal. The module can be powered with the voltage from 3.3 V to 5 V, only one signal line is required to control it. DFRobot DFR0888-16

24 individually addressable RGB LEDs arranged in a closely spaced circle, controlled with a single digital output of a microcontroller. Adafruit 1586

A set of 10 mini modules with addressable RGBW Neopixel LEDs. The diodes are controlled using a popular single-wire interface, and their design allows the modules to be connected in series. Adafruit 4776

The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243

Module with 20 RGB LEDs WS2813 Mini. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104020170

The Mini LED 5V module is designed to fit into a 20mm diameter interior. It is designed to have power requirements that are within the power limits of a computer\'s USB port (5V and well below 100mA). Kitronik 35137