Kitronik 2726 - lilac LED 10pcs

Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector

Module with two white diodes. Dedicated to Voron 3D printers as hotend and printing nozzle lighting

Kitronik 2766 is a yellow LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.

Kitronik 2723 is a green LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.

RGB Panel Shield is an extension in the form of shield overlays designed for Arduino. With its help it is possible to control the RGB 32x32 LED display (refresh 1: 8). Communication with the display takes place via a 2x8 connector. SparkFun SPX-14721

Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector

A small module for learning how to solder. It allows you to build a small device with two LEDs that turn on when the light intensity changes

LED display module with three LEDs in red, yellow and green. Perfect to be used as a traffic light

Module with red LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030005

An advanced LED module for the BBC micro:bit, featuring 60 individually addressable ZIP LEDs, plus a MEMS microphone and piezo speaker to create light and sound effects. The module also has an I2C-controlled real-time clock, and its integrated edge connector and AA battery holder means it\'s ready to go as soon as you plug in your micro:bit. Kitronik 5672

A set of 10 mini modules with addressable RGBW Neopixel LEDs. The diodes are controlled using a popular single-wire interface, and their design allows the modules to be connected in series. Adafruit 4776

Gravity: Digital LED String Lights (Warm White) consist of a series of warm white LEDs. It is powered by a voltage of 2.5 ... 5 V and consists of 40 LEDs placed on a 4-meter cable. DFRobot DFR0448

A set of 20 modules with RGB diodes with a diameter of 12.5 mm. The diodes have a 24-bit range of colors. Adafruit 1559

The Satellite Module 001 is an RGB LED module from macetech, containing ten 100 mA 5-chip wide-angle (140 degree) red, green, and blue LEDs. The module runs at 10 V, for a maximum power of 3 W, and it is connected in a common-anode configuration. Pololu 1243

Module with white LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-W