- New
RGB digital diode WS2813B 5050 with dual signal input – PLCC-6
ID: 579640
5902186329652
zł1.89
Tax included
zł1.54 tax excl.
The WS2813B PLCC-6 LED diode integrates an RGB chip and controller in a single 5050 package, supports a dual signal line with transmission continuity function, and a 24-bit color depth. Used in lighting installations, peripheral devices, and multimedia systems.
Description
WS2813B LEDs in a PLCC-6 package integrate an RGB chip and control circuit in a standard 5050 size, enabling the creation of externally digitally controlled pixels. The circuit supports dual signal lines (DIN and BIN), which ensures continuity of data transmission even in the event of a single pixel failure. The built-in signal shaping correction circuit eliminates distortions and enables signal transmission over a distance of more than 5 m without additional amplifying circuits.
The WS2813B supports 24-bit color depth (256 levels per channel), providing a full palette of 16,777,216 colors and a refresh rate of up to 2 kHz – sufficient for operation with HD cameras without flicker. The data transmission protocol is based on NZR mode with one input and output signal and an internal data latch circuit. The maximum transmission speed is 800 kb/s, and at 30 fps it is possible to cascade at least 1024 pixels. The lack of need for external components, such as capacitors, simplifies circuit design.
Used in decorative lighting, peripheral devices, computer equipment, entertainment systems, and consumer electronics.
Properties
- Supply voltage: 3.7 V – 5.3 V
- Maximum idle current: < 0.6 mA
- Brightness: red 300–600 mcd, green 800–1500 mcd, blue 200–400 mcd
- Wavelength: red 620–630 nm, green 510–520 nm, blue 465–475 nm
- Transmission time: up to 300 ns
- Data protocol: NZR, single-range
- Reset time: > 280 μs
- Dimensions: 5.0 × 5.4 × 1.65 mm
- Dimensional tolerance: ±0.05 mm
- Pin configuration: 6 pins (DIN, DO, BIN, BO, VCC, GND)
579640
Data sheet
- Voltage
- 3,7 - 5,3 V
- Colour
- RGB
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Kitronik 2766 is a yellow LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.
zł23.16
24h
Available quantity: 5
Available
Module with flashing multi-color LED. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030014
zł12.74
4 weeks
No product available!
Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector
zł7.61
24h
Available quantity: 10
Available
RGB Pixels are digitally-controllable lights you can set to any color, or animate. Adafruit 322
zł335.14
4 weeks
No product available!
Module with green LED diode and potentiometer. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 104030007
zł12.71
24h
Available quantity: 2
Available
Gravity module with a colored RGB WS2812 LED. Thanks to the controller built into the diode, you can connect the modules in series and control all with one microcontroller port. DFRobot DFR0605
zł8.28
4 weeks
No product available!
Module with white LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0031-W
zł10.57
24h
Available quantity: 1
Available
The Mini LED 5V module is designed to fit into a 20mm diameter interior. It is designed to have power requirements that are within the power limits of a computer\'s USB port (5V and well below 100mA). Kitronik 35137
zł7.59
24h
Available quantity: 6
Available
HK Yellow 16 LED Circular Light Board with Lead (28511)
zł19.80
24h
Available quantity: 1
Available
A set of 20 modules with RGB diodes with a diameter of 12.5 mm. The diodes have a 24-bit range of colors. Adafruit 1559
zł206.07
4 weeks
No product available!
No product available!
Kitronik 2712 is a red LED designed for use in e-textiles, allowing for easy integration of lighting effects into textile projects. With a built-in resistor and clearly marked polarity (+ and -), the LED is simple to use and safe to incorporate with conductive materials.
zł22.73
24h
Available quantity: 10
Available
Module with RGB LED, it is possible to control individual colors using digital signals as well as PWM signals. The module has a connector in accordance with the Grove standard. Seeed studio 101020472
zł21.33
24h
Available quantity: 2
Available
Module with green LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0021-G
zł6.25
24h
Available quantity: 2
Available
Digitally controlled module with LED. Perfect for people starting their fun with Arduino. Equipped with an XH2.54 connector
zł7.61
24h
Available quantity: 14
Available
Module with blue LED, digitally controlled. Perfect for people starting to play with Arduino. Equipped with a Gravity interface. DFRobot DFR0021-B
zł6.08
24h
Available quantity: 2
Available
The WS2813B PLCC-6 LED diode integrates an RGB chip and controller in a single 5050 package, supports a dual signal line with transmission continuity function, and a 24-bit color depth. Used in lighting installations, peripheral devices, and multimedia systems.