zł7,899.99
RGB and Gesture Sensor - a module with a multifunctional optical sensor APDS-9960
ID: 557744
5906623417285
zł28.75
Tax included
zł23.37 tax excl.
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Detection range from 10 to 20 cm, communication via I2C. SparkFun SEN-12787
Description
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. The sensor has a detection range of 10 to 20 cm and communicates via the I2C interface. The APDS-9960 system has built-in UV and IR filters and four LEDs set to receive information from different directions. A guide with examples of use is available on the product page.
Features
- Voltage: 3.3V
- Detection of ambient light and RGB color
- Proximity sensor
- Gesture detection
- Range: 10 to 20
- I2C interface (address: 0x39)
557744
Data sheet
- Interface
- I2C
- Type of sensor
- Infrared
- Minimum distance
- 10 cm
- Maximum distance
- 20 cm
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
zł1.50
24h
Available quantity: 9355
Available
Cables for evaluation boards, set of 10 pcs., blue colour
zł5.20
24h
Available quantity: 20
Available
Cables for evaluation boards, set of 10 pcs., red colour
zł5.20
Delivery date unknown
No product available!
A set of 40 female-female connection cables, in various colors, 17 cm long. CAB_F-F (Rainbow-40-17)
zł5.69
Delivery date unknown
No product available!
Other products in the same category (16)
Color Sensor, complete color detector
zł50.02
24h
Available quantity: 2
Available
Module with color sensor TCS3472. The board is equipped with a Grove connector and communicates via the I2C interface. M5Stack U009
zł62.90
24h
Available quantity: 1
Available
Sensor for detecting the distance, intensity and frequency of light (lightning) within a radius of 40 km. The module enables weather enthusiasts to measure data about local storms. DFRobot SEN0290
zł145.79
24h
Available quantity: 3
Available
Module with an integrated proximity and ambient light sensor based on the VCNL4040 system. It can detect obstacles in the range of 0 to 20 cm. It communicates via the I2C bus. Adafruit 4161
zł33.90
24h
Available quantity: 2
Available
Module with 11-channel AS7341 sensor that allows to detect light in different wavelength ranges (color detection). It communicates via the I2C interface. DFRobot SEN0365
zł85.08
24h
Available quantity: 2
Available
Module with light sensor (photoresistor). An analog output was led out on the XH2.54 connector
zł7.55
24h
Available quantity: 2
Available
No product available!
A 5-channel flame detector module for detecting a flame over a larger area. Detects fire with 5 sensors that are placed on the module every 30 degrees. It has a digital and analog output. modFLAME-5CH
zł34.10
24h
Available quantity: 2
Available
modTSL2561 is a module containing a light sensor TSL2561; communication with the system takes place using the I2C bus
zł15.90
4 weeks
No product available!
TCS34725 has RGB and Clear light sensing elements. An IR blocking filter, integrated on-chip and localized to the color sensing photodiodes, minimizes the IR spectral component of the incoming light and allows color measurements to be made accurately. Adafruit 1356
zł46.89
24h
Available quantity: 2
Available
SEN0162 This UV Sensor with GUVA-S12SD chip is suitable for detecting the UV raditation in sunlight. It can be used in UV Index Monitoring, DIY project, UV-A Lamp Monitoring, Plants growing Environmental monitoring...etc.
zł26.33
24h
Available quantity: 2
Available
Module with light intensity sensor LTR-303. It offers a measuring range from 1 to 65535 lux and a 16-bit resolution. Communication takes place using I2C. Adafruit 5610
zł28.39
24h
Available quantity: 6
Available
Crowtail – Flame Sensor 2.0 is a module detecting infrared radiation and flame sources, operating in the range of 760–1100 nm. Intended for use in safety systems, robotics, and educational projects.
zł9.90
24h
Available quantity: 4
Available
Available
Module with a light intensity sensor BH1750FVI dedicated to the M5StickC sets. It communicates via the I2C interface. M5Stack U134
zł27.90
1 weeks
No product available!
UV Sensor with response spectrum: 200nm-370nm
zł36.97
24h
Available quantity: 1
Available
A multifunctional module with an optical sensor for measuring the intensity of illumination, the color of the incident RGB light, the distance from the object and the detection of 3D gestures. Detection range from 10 to 20 cm, communication via I2C. SparkFun SEN-12787