RA-08H LoRaWan Node - development board with RP2040 microcontroller and 868MHz LoRa module
ID: 1201687
5902186331938
zł59.96
Tax included
zł48.75 tax excl.
A communication module based on the Raspberry Pi RP2040 microcontroller, designed for data transmission in the 868 MHz band. It supports point-to-point LoRa and LoRaWAN operation, offering long range and low power consumption. The board is equipped with six Crowtail interfaces, an integrated battery charging circuit, and the ability to be powered by a solar panel. Compatibility with the Arduino IDE and MicroPython makes it an ideal platform for building IoT nodes, weather stations, and environmental monitoring systems. Elecrow RA-08H LoRaWan Node
Description
RA-08H LoRaWAN Node is a high-performance communication module designed for data transmission in the 868 MHz band. The device combines the power of the dual-core Raspberry Pi RP2040 microcontroller with the capabilities of the RA-08H module, offering wireless communication across the 803–930 MHz frequency range. The board supports both LoRa point-to-point communication and LoRaWAN networking, making it a versatile solution for IoT applications, smart homes, agriculture, environmental monitoring, and logistics.
With its integrated lithium battery charging and discharging circuit and a dedicated interface for solar panel charging, the module is ideal for outdoor and mobile use. It features six Crowtail interfaces (2x analog, 2x digital, 1x UART, 1x I2C) that allow easy connection of over 150 compatible sensor and accessory modules. This enables quick creation of complete LoRa nodes such as a weather station or remote monitoring system. The module can be programmed using Arduino IDE or MicroPython, offering flexible development options. RA-08H LoRaWAN Node Board is an ideal tool for makers, engineers, and hobbyists who need a reliable platform for building long-range, low-power IoT applications.
Features
- Microcontroller: Raspberry Pi RP2040 (dual-core ARM Cortex-M0+ @ 133 MHz)
- Memory: 264 KB SRAM, 4 MB Flash
- LoRa module: RA-08H with 128 KB Flash and 16 KB SRAM
- LoRa frequency range: 803–930 MHz
- Supported communication: LoRa point-to-point and LoRaWAN
- Antenna interface: SMA or IPEX (first generation)
- 6 Crowtail interfaces (2x analog, 2x digital, 1x UART, 1x I2C)
- 2x10 general-purpose GPIO pins
- Power interfaces: USB Type-C port, battery connector, solar panel connector
- Power supply: 5V/1A (USB)
- Built-in lithium battery charging circuit
- Compatibility: over 150 Crowtail modules
- Programming environments: Arduino IDE / MicroPython
- Dimensions: 35 x 50 mm
Kit contains
- RA-08H LoRaWAN Node Board
- LoRa antenna (868 MHz / 915 MHz)
- Goldpin connector
- USB-C cable
1201687
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
A touchscreen display with an embedded ESP32-S3-WROOM-1-N4R8 module, combining high performance with application flexibility. The 5-inch TFT-LCD screen with a resolution of 800x480 px and capacitive touch ensures precise operation and a clear image. The device offers Wi-Fi and Bluetooth connectivity, supports LVGL, openHASP, and the popular Arduino IDE, PlatformIO, and MicroPython environments. Thanks to USB-C, TF, UART, and I2C connectors, it is ideal for IoT projects, automation, and intelligent control systems. Elecrow CrowPanel 5.0"-HMI
zł134.08
24h
Available quantity: 3
Available
This ESP32-S3-WROOM-1-N4R8 touchscreen display combines high performance with flexible application flexibility. Its 5-inch TFT-LCD screen with 800x480 px resolution and capacitive touch ensures precise operation and a clear image. The device offers Wi-Fi and Bluetooth connectivity, supports LVGL, openHASP, and the popular Arduino IDE, PlatformIO, and MicroPython environments. With USB-C, TF, UART, and I2C connectors and an included acrylic enclosure, it\'s ideal for IoT projects, automation, and intelligent control systems.
zł154.30
24h
Available quantity: 3
Available
An ESP32-S3 HMI display with a dual-core 240 MHz Xtensa LX7 processor, offering fast performance and extensive wireless connectivity via Wi-Fi and Bluetooth 5.0. The 3.5-inch IPS screen with a resolution of 480x320 provides excellent image quality and precise capacitive touch. The device supports AI features such as speech recognition and synthesis, as well as RTC, battery charging, audio, and an SD card slot. Compatibility with the Arduino IDE, ESP-IDF, and LVGL enables the rapid development of modern IoT interfaces and applications. Elecrow CrowPanel Advance 3.5"
zł165.42
24h
Available quantity: 3
Available
Other products in the same category (16)
LoRa module with RP2040 microcontroller. It uses the SX1262 chip, ensuring reliable long-distance communication in the frequency range from 850 to 930 MHz. Waveshare RP2040-LoRa-HF
zł54.00
4 weeks
No product available!
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. There is a Grove connector on the board. Seeed Studio 113020091
zł94.33
24h
Available quantity: 4
Available
Solar-powered communication node integrating LoRa, GPS and XIAO nRF52840 Plus microcontroller, ready to work thanks to pre-installed Meshtastic software. The device is equipped with a 5W solar panel and four 18650 batteries, which ensures reliable operation even in limited sunlight and makes it ideal for field work. Thanks to its long range (up to 8-9 km), support for many navigation systems and the possibility of expansion via the Grove interface, the P1-Pro will be useful in environmental monitoring, IoT, exploration and emergency communication. Seeed Studio 114993633
zł493.53
4 weeks
No product available!
Expansion board with LoRa Node SX1262 module and GNSS L76K dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band and enables positioning within the GPS, GLONASS, BDS and QZSS systems. Waveshare SX1262 868/915M LoRaWAN/GNSS HAT
zł112.45
4 weeks
No product available!
LoRa communication module with touchscreen and two microcontrollers (ESP32-S3 and RP2040) for long-range wireless communication, ready to work with the built-in Meshtastic software. The integrated SX1262 module supports LoRa connectivity, and thanks to Wi-Fi and compatibility with over 400 Grove modules, the device can be flexibly expanded and integrated into IoT projects. It can act as a mobile or stationary node in a mesh network, offering independent field communication without access to the cellular network, making it ideal for applications in education, automation and emergency situations. Seeed Studio 114993532
zł229.00
4 weeks
No product available!
STM32 Nucleo starter pack for LoRa technology. It consists of two development kits: NUCLEO-L073RZ and NUCLEO-F746ZG and expansion modules for communication within LoRa: LRWAN_NS1 and LRWAN_GS_LF1. STMicroelectronics P-NUCLEO-LRWAN3
zł506.86
1 weeks
No product available!
Compact and energy-efficient solution combining Bluetooth 5.0 and LoRa (862–930 MHz), ideal for IoT projects requiring long range and low power consumption. It uses the XIAO nRF52840 MCU with Cortex-M4 core and support for multiple interfaces and the LoRa SX1262 module for reliable wireless communication. The kit is perfect for applications such as Meshtastic, asset tracking, sensor networks or educational projects. Seeed Studio 102010710
zł78.90
4 weeks
No product available!
A low-power development platform designed for creating LoRa-based tracking devices. It combines the Nordic nRF52840 chip with the Semtech LR1110 module, offering wide range, low power consumption, and compatibility with Meshtastic software. The board supports over 300 Seeed Grove sensors and has built-in environmental sensors and an accelerometer for expanded monitoring capabilities. Seeed Studio 114993370
zł147.00
4 weeks
No product available!
Module with LoRa transmitter based on RFM95 (SX1276 LoRa®). It works with a frequency of 433 MHz, maximum power up to 100 mW and a power gain of up to + 20dBm. The module has a built-in antenna, but it is possible to connect an external antenna (MHF connector). The module has a connector in accordance with the Grove standard. Seeed studio 113060007
zł84.92
24h
Available quantity: 1
Available
Shield with RFM95W 915 MHz system for LoRa/LoRaWAN communication, designed for Arduino boards. SHIELD-LORA-RFM Citron
zł131.01
24h
Available quantity: 2
Available
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare Pico-LoRa-SX1262-433M
zł64.03
24h
Available quantity: 12
Available
A mobile LoRa transceiver compatible with Meshtastic, equipped with GPS supporting GPS, GLONASS, BeiDou, and QZSS. The device utilizes a powerful ESP32-S3 microcontroller and SX1262 transceiver, ensuring stable, long-range communication in the 868 MHz band. The 1.54" EPD screen allows for convenient data display with very low power consumption, and the 1200 mAh battery ensures long operation in the field. Elecrow ThinkNode M5 Walkie-Talkie
zł259.00
Delivery date unknown
No product available!
HAT module with RFM95W 433 MHz system for LoRa / LoRaWAN communication and OLED display, designed for Raspberry Pi minicomputers. Adafruit 4075
zł200.64
24h
Available quantity: 1
Available
Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers ready-to-go operation without programming, power supply from USB-C, solar panel or battery (built-in 2000mAh battery), and a 1.3" OLED display for real-time monitoring. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it is a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993649
zł215.24
4 weeks
No product available!
LoRa module working on the 868 MHz frequency band with built-in RP2040 microcontroller, CH340 USB to UART converter, 74HC125V voltage level converter. SB Components 23240
zł362.46
24h
Available quantity: 1
Available
Compact and energy-efficient Meshtastic node designed for mobile field applications, integrating a LoRa module (862-930 MHz), L76K GPS and nRF52840 microcontroller. The device offers ready-to-go operation without programming, powered by USB-C, solar panel or battery. With Bluetooth 5.0 connectivity, Grove interface and support for multiple navigation systems, it proves to be a reliable tool for building decentralized mesh networks, monitoring location and expanding IoT projects. Seeed Studio 114993653
zł137.43
4 weeks
No product available!
A communication module based on the Raspberry Pi RP2040 microcontroller, designed for data transmission in the 868 MHz band. It supports point-to-point LoRa and LoRaWAN operation, offering long range and low power consumption. The board is equipped with six Crowtail interfaces, an integrated battery charging circuit, and the ability to be powered by a solar panel. Compatibility with the Arduino IDE and MicroPython makes it an ideal platform for building IoT nodes, weather stations, and environmental monitoring systems. Elecrow RA-08H LoRaWan Node