SenseCAP T1000-B LoRaWAN Tracker - tracking module with GNSS, WiFi and Bluetooth communication

A wireless LoRa module based on the Semtech SX1262 chip, operating in the 433 MHz and 470 MHz bands, designed for IoT, agriculture, industry, and smart home applications. The module offers long transmission range, low power consumption, and high receiver sensitivity, enabling reliable connections in harsh environments. Equipped with UART, I2C, SPI, ADC, and GPIO interfaces, it allows for easy integration with microcontrollers and electronic systems. Seeed Studio 100097817

An industrial IoT locator designed for long-term asset monitoring in indoor and outdoor environments. It utilizes LoRaWAN communication and GNSS positioning, while a built-in solar panel and 4000 mAh battery ensure near-maintenance-free operation over extended periods. Its rugged IP67 housing and resistance to harsh environmental conditions enable use in the field, logistics, and construction industries. Seeed Studio 100087298

An industrial LoRaWAN asset tracker designed for long-term asset monitoring, both indoors and outdoors. Equipped with an 8000 mAh battery and an IP67 enclosure, it offers over a year of maintenance-free operation in harsh environments. Precise GNSS, BLE, and Wi-Fi positioning, along with anti-tamper features, ensure security and tracking accuracy. SeeedStudio 100057727

An industrial LoRaWAN asset tracker designed for long-term asset monitoring, both indoors and outdoors. Equipped with an 8000 mAh battery and an IP67 enclosure, it offers over a year of maintenance-free operation in harsh environments. Precise GNSS and BLE positioning, along with anti-tamper features, ensure security and tracking accuracy. Seeed Studio 100082900

An evaluation kit for rapid prototyping of IoT devices with long range and high data rates. It supports sub-GHz and 2.4 GHz bands and various modulation schemes, including LoRa and FLRC, reaching speeds of up to 2.6 Mbps. The kit is compatible with Arduino Uno, STM32 Nucleo, and Nordic DK platforms and features an OLED display and Grove connectors for connecting sensors. Seeed Studio 100039980

An IoT platform based on the nRF52840 chip and the Semtech LR1121 transceiver, enabling LoRa and LoRaWAN communication in the 868/915 MHz and 2.4 GHz bands. The module offers high receiver sensitivity of up to -141 dBm, enabling communication distances of up to approximately 15 km. Support for multiple interfaces, such as GPIO, ADC, I2C, and UART, and compatibility with the Crowtail ecosystem, enables easy integration with sensors and rapid prototyping. Elecrow LMM15121D

A multi-functional device combining a 7000 mAh power bank with LoRa communication based on the Meshtastic protocol, enabling the creation of a decentralized mesh network without internet access. Equipped with a Semtech LR1110 module, an nRF52840 microcontroller, and built-in GPS supporting multiple navigation systems, it allows for messaging and real-time location sharing. It offers fast charging up to 22.5W, PD, QC, and PPS support, and MagSafe-compatible wireless charging. Elecrow LMM14004D1

A wireless communication module designed for IoT systems and applications requiring long-range data transmission. Based on the Semtech SX1262 chip, it supports LoRa, (G)FSK, and GMSK modulations in the 850–930 MHz band, offering a maximum transmit power of 22 dBm and very high receiver sensitivity of up to -148 dBm. With a link budget of up to 170 dB, it enables communication over distances of typically 6–7 km, and up to approximately 15 km under favorable conditions. The module communicates with a microcontroller via an SPI interface, features very low power consumption in sleep mode (1.62 µA), and a compact size of 10 x 10 mm, facilitating integration in embedded devices and battery-powered systems. Elecrow CIL13262L

A wireless communication module designed for IoT systems and applications requiring long-range transmission. Based on the Semtech LLCC68 chip, it supports LoRa and (G)FSK modulations in the 850–930 MHz band, offering a maximum transmit power of 22 dBm and a receiver sensitivity of up to -129 dBm. With a link budget of up to 151 dB, it enables communication over distances of up to 5–6 km, and even up to 10 km under favorable conditions. The module communicates with a microcontroller via an SPI interface, features very low power consumption in sleep mode (1.62 µA), and has a compact size of 10 x 10 mm, facilitating integration in embedded devices. Elecrow CIL13368L

ThinkNode M2 Meshtastic (LoRa) enables long-range communication using LoRa technology and Meshtastic firmware. The device is equipped with an ESP32-S3 microcontroller, an SX1262 LoRa module, a 1.3-inch OLED display with 128 × 64 px resolution, 2.4 GHz WiFi, Bluetooth 5.0 Low Energy, and a USB Type-C connector. The transceiver is compatible with the Meshtastic App, also supports MeshCore firmware, and is suitable for emergency communications, mesh networking, and IoT applications. Elecrow ThinkNode M2 Meshtastic (LoRa)

Multi-protocol wireless communication module combining the Nordic nRF52840 microcontroller with the Semtech LR1110 transceiver. Supports LoRa / LoRaWAN in the 850 MHz to 930 MHz band, Bluetooth Low Energy, Thread, Zigbee and NFC, as well as GNSS and WiFi-based positioning functions. Offers up to +21 dBm transmit power, sensitivity down to -141 dBm and a communication range exceeding 10 km under suitable conditions. Elecrow CIL13510X

Wireless communication module for IoT devices combining a dual-core ESP32-S3R8 microcontroller with an SX1262 LoRa transceiver; supports LoRaWAN in EU868 and US915 bands, 2.4 GHz WiFi and Bluetooth LE 5.0; 16 MB Flash and 8 MB PSRAM; LoRa output power up to 20.9 dBm; sensitivity down to -137 dBm; IPEX antenna connector; 3.0-3.6 V supply voltage; 38-pin SMT package; dimensions 21.6 x 16.5 x 3.3 mm. Seeed Studio 100020327

Portable development device based on the ESP32-S3 microcontroller combines an SX1262 868 MHz LoRa transceiver, a 2.8" IPS color display, a full QWERTY keyboard, and a trackball controller in a compact enclosure. Factory-installed LILYGO Factory Firmware allows immediate use without manually flashing the base firmware. The package includes an 868 MHz LoRa FPC antenna, a power cable, and a 1×6 pin header. The device is designed for LoRa communication terminals, portable messaging devices, IoT projects, and custom applications based on the ESP32-S3 microcontroller. LILYGO TTGO T-Deck 868 MHz Black LILYGO Factory Firmware

Portable LoRa device based on the nRF52840 microcontroller combines an SX1262 868 MHz LoRa transceiver, a 1.54" E-Paper display, an L76K GNSS positioning module, and a BME280 environmental sensor in a compact ABS enclosure with a built-in 850 mAh battery. Factory-installed Meshtastic firmware allows immediate deployment in mesh networks without manually flashing the software. The kit includes an 868 MHz LoRa antenna and a USB Type-C cable. The device is designed for autonomous mesh nodes, long-range communication, GPS positioning, and mobile IoT applications. LILYGO TTGO T-Echo 868 MHz BME280 Meshtastic Firmware

A development board based on the ESP32 microcontroller that combines an SX1278 LoRa transceiver, a 0.96" OLED display, and a microSD card slot in a single compact design. Preloaded with Disaster-Radio firmware, it supports Wi-Fi, Bluetooth 4.2, and 433 MHz LoRa communication. The kit includes a 433 MHz LoRa antenna, a JST 2-pin power cable, and pin headers for soldering. The board is designed for autonomous communication devices, mesh network nodes, and IoT applications. LILYGO TTGO T3 LoRa32 V1.6.1 Disaster-Radio 433 MHz

An ESP32-based development board that combines a LoRa communication module, NEO-6M GPS receiver, and a 0.96" OLED display in a single device. Preloaded with Meshtastic firmware, it supports Wi-Fi, Bluetooth 4.2, and 433 MHz LoRa communication. The kit includes a non-soldered 0.96" OLED display, a 433 MHz LoRa antenna, and pin headers for self-assembly. The board is suitable for building autonomous mesh network nodes, GPS trackers, and battery-powered IoT devices using a 18650 Li-Ion cell or a microUSB power supply. LILYGO TTGO T-Beam Meshtastic 433 MHz Non-Soldered OLED