![LoRa-E5 mini - development board with STM32WLE5JC LoRa-E5 mini - development board with STM32WLE5JC](https://kamami.pl/41882-large_default/lora-e5-mini-development-board-with-lora-e5-stm32wle5jc-113990939.jpg)
![LoRa-E5 mini - development board with STM32WLE5JC LoRa-E5 mini - development board with STM32WLE5JC](https://kamami.pl/41882-large_default/lora-e5-mini-development-board-with-lora-e5-stm32wle5jc-113990939.jpg)
zł100.00 tax excl.
IoT development board with STM32WLE5JC chip that connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. It has all the pins of the LoRa-E5 module and an external antenna. Seeed Studio 113990939
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The development board with LoRa-E5 is an energy-saving, compact and efficient LoRaWAN module designed by Seeed Technology Co., Ltd. It features STMicroelectronics' STM32WLE5JE chip, which is the world's first integrated SoC to combine LoRa RF and MCU chip. The LoRa SX126X module is embedded in a very low power consumption microcontroller with ARM Cortex M4 core. It supports (G) FSK and LoRa mode in the 62.5kHz, 125kHz, 250kHz and 500kHz band, making it suitable for the design of IoT devices supporting EU868 and US915. On the board, there is an SMA connector (antenna included), an IPEX MHF connector, LEDs indicating operation and a connector with all pins of the LoRa-E5 module. It is powered by a USB type C connector or dedicated power pins (voltage range from 3.7 to 5 V).
The LoRa E5 module is designed in accordance with industry standards, therefore it is suitable for the design of industrial IoT products with a wide operating temperature range from -40 ℃ to 85 ℃. Has FCC and CE certificates. Full board documentation and examples of use are available on the product Wiki page.
Pinout
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. Designed for surface mounting. Seeed Studio 317990687
IoT module with the STM32WLE5JC chip, which connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. There is a Grove connector on the board. Seeed Studio 113020091
IoT development kit with STM32WLE5JC chip that connects microcontroller with ARM Cortex-M4 core and LoRa SX126X module. It has all the pins of the LoRa-E5 module, I2C, SPI, UART, RS485 interfaces and an external antenna. Seeed Studio 113990934
LoRa wireless communication module dedicated to long-distance data transfer. It operates in the 433 MHz frequency band and is equipped with RS232, RS485 and RS422 industrial interfaces. Waveshare SX1262-LoRa-DTU-LF
No product available!
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 433 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.2
Development board designed for IoT projects. It is equipped with a WiFi/Bluetooth module ESP32, LoRa 868 MHz, GPS and a basket for a Li-Ion 18650 battery. TTGO T-Beam V1.1
No product available!
Transceiver module based on LoRa modulation technique. It operates in the ISM 868/915MHz band, offering extremely low reception sensitivity of -136dBm and increased output power of +30dBm. Hoperf RFM95PW-868S2
LoRa module with RP2040 microcontroller. It uses the SX1262 chip, ensuring reliable long-distance communication in the frequency range from 850 to 930 MHz. Waveshare RP2040-LoRa-HF
Expansion board with LoRa Node SX1262 module dedicated for Raspberry Pi. It supports the LoRaWAN protocol and allows communication in the 433 MHz frequency band. Waveshare SX1262 433/470M LoRaWAN HAT
Development kit with SAMD21G18 microcontroller with ARM Cortex M0 core and LoRa RFM95 868/915 MHz radio communication module. Adafruit 3178
Expansion board with LoRa E22-900T22S module for Raspberry Pi. Allows communication in the 868 MHz frequency band. Waveshare SX1262 868M LoRa HAT
At the Feather M0\'s heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip. Adafruit 3179
No product available!
LoRaWAN SX1303 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1303 868M LoRaWAN Gateway (B)
No product available!
Function module designed for MicroMod boards. It allows you to add LoRa and LoRaWAN wireless communication in the 915 MHz frequency band to the project. SparkFun DEV-18573
LoRa module with RP2040 microcontroller. It uses the SX1262 chip, ensuring reliable long-distance communication in the frequency range from 850 to 930 MHz. Included with a USB Type-C adapter. Waveshare RP2040-LoRa-HF-Kit
Expansion board with LoRaWAN SX1302 and GNSS L76B dedicated to the Raspberry Pi. The kit includes the 868M antenna, GPS and cables. Waveshare SX1302 868M LoRaWAN Gateway HAT
Seeed studio LoRa / GPS HAT is an extension designed for Raspberry Pi 2 minicomputers (model B) and Raspberry Pi 3. It has a LoRa communication module (868 MHz) and a GPS module. Seeed Studio 113990254
No product available!
The expansion board with the LoRa SX1262 module for the Raspberry Pi Pico. It supports the LoRaWAN protocol and allows communication in the 868 MHz frequency band. Waveshare Pico-LoRa-SX1262-868M
LoRa radio module with 433 MHz operating frequency. Communication takes place via the UART serial interface. It is supplied with the voltage in the range from 3.4 to 5.5 V. DFRobot TEL0116
IoT development board with STM32WLE5JC chip that connects the microcontroller with the ARM Cortex-M4 core and the LoRa SX126X module. It has all the pins of the LoRa-E5 module and an external antenna. Seeed Studio 113990939