New products
New products New products
zł343.01
24h
Available
Available
Available
Available
Available
Micsig DP7002 - 200MHz High Voltage Differential Probe
ID: 1197276
5902186321250
zł5,466.12
Tax included
zł4,444.00 tax excl.
The Micsig DP series differential probe is based on advanced metal shielding technology. It offers a 200 MHz frequency band and the ability to measure voltages up to 7000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP7002
Description
The differential probe, utilizing advanced metal shielding technology, is a modern tool distinguished by its very low noise level, excellent amplitude and frequency characteristics at high voltages, and superior common-mode rejection ratio (CMRR). These features enable users to easily test high-frequency and high-voltage signals. Additionally, the built-in zero-point calibration function allows for quick probe zeroing. The probe offers dual measurement ranges, improving the signal-to-noise ratio and accommodating various testing requirements. A standard BNC connector ensures compatibility with any oscilloscope, while USB-powered operation eliminates the need for external power supplies.
Extra features such as an overvoltage alarm with a flashing LED and buzzer provide quick feedback in critical situations. The DP probe also stands out for its compact and aesthetic design, significantly smaller than traditional differential probes. It maintains excellent bandwidth uniformity, with amplitude fluctuation below 0.5 dB within half the bandwidth—even at high frequencies—ensuring high measurement accuracy. High input impedance and low capacitance minimize loading effects, significantly improving differential signal accuracy.
This probe is ideal for AC voltage measurements, high-voltage isolation tests, power supply design, and power converter diagnostics. Its versatility makes it a valuable tool in both electronics workshops and industrial environments.
Features
- Bandwidth: 200 MHz
- Rise time: ≤ 1.75 ns
- Attenuation ratio: 100X, 1000X
- Accuracy: ±2%
- Max differential voltage (DC + AC Peak):
- 100X: 700 V
- 1000X: 7000 V
- Max common-mode voltage: CAT III 7000Vpk
- Noise:
- Full bandwidth:
- 100X: ≤ 125 mVrms
- 1000X: ≤ 400 mVrms
- 5 MHz bandwidth:
- 100X: ≤ 50 mVrms
- 1000X: ≤ 300 mVrms
- Full bandwidth:
- CMRR:
- DC: > -80 dB
- 100 kHz: > -60 dB
- 10 MHz: > -40 dB
- 100 MHz: > -26 dB
- Input impedance:
- Differential mode: 60 MΩ, 0.78 pF
- Common mode: 30 MΩ, 1.6 pF
- Delay:
- 100X: 12.2 ns
- 1000X: 12.3 ns
- Output voltage: ≤ 7V
- Fast zero-point calibration
- Dual measurement ranges
- Overvoltage indication: LED and buzzer
- Connector: BNC
- Power supply: USB Type-C
- Operating temperature range: 0℃ to 40℃
- Cable length: 8 cm (input), 120 cm (output)
- Control module dimensions: 91 x 33 x 15 mm
- Signal module dimensions: 100 x 36 x 20 mm
Kit contains
- Differential probe
- USB cable
- 2 x alligator clips
- 2 x measurement tips
1197276
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
The Micsig DP series differential probe is based on advanced metal shielding technology. It offers a 100 MHz frequency bandwidth and the ability to measure voltages up to 7000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP7000
zł4,685.07
Delivery date unknown
No product available!
Other products in the same category (16)
The Zeenko 20 dB SMA attenuator is a solid and precise component for RF measurement paths, useful in diagnostics, calibration and protecting devices such as the tinySA, nanoVNA or RF generators. It enables safe measurements and improves impedance matching quality over a wide frequency range.
zł58.22
6 weeks
No product available!
The Zeenko 30 dB SMA attenuator is a solid and precise component for RF measurement paths, useful in diagnostics, calibration and protecting devices such as the tinySA, nanoVNA or RF generators. It enables safe measurements and improves impedance matching quality over a wide frequency range.
zł58.22
24h
Available quantity: 2
Available
The Zeenko N 10 dB attenuator is a reliable accessory for any RF system user – from amateurs to professionals. It enables safe and precise measurements and provides better signal matching in the signal path. Thanks to its high durability (up to 5 W), it is suitable for a wide range of laboratory and field applications.
zł53.04
24h
Available quantity: 4
Available
This current probe is designed for measuring DC and AC current in power electronics systems and switching power supplies. It offers a 10 MHz DC bandwidth, a rise time of ≤ 46 ns, and two measurement ranges: 30 A and 150 A RMS, with a maximum peak current of up to 300 A. The device provides high measurement accuracy of ±1% and a resolution of up to 10 mA in the lower range. The BNC connector ensures compatibility with many oscilloscopes, and the 20 mm jaws enable current measurements in larger wires. Micsig CP1510
zł6,614.94
4 weeks
No product available!
This current probe is designed for measuring DC and AC current in power electronics systems and switching power supplies. It offers a 5 MHz DC bandwidth, a rise time of ≤ 70 ns, and two measurement ranges: 50 A and 300 A RMS, with a maximum peak current of up to 500 A. The device provides high measurement accuracy of ±1% and a resolution of up to 10 mA in the lower range. The BNC connector ensures compatibility with many oscilloscopes, and the 20 mm jaws enable current measurements in larger wires. Micsig CP3005
zł6,603.87
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 60 A, offering a wide bandwidth from 70 Hz to 30 MHz and a sensitivity of 100 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP60XS-80
zł4,939.68
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 120 A, offering a wide bandwidth from 34 Hz to 30 MHz and a sensitivity of 50 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP120XS-80
zł4,942.14
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 300 A, offering a wide bandwidth from 10 Hz to 30 MHz and a sensitivity of 20 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP300XS-80
zł5,462.43
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 600 A, offering a wide bandwidth from 8 Hz to 30 MHz and a sensitivity of 10 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP600XS-80
zł4,939.68
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 1200 A, offering a wide bandwidth from 5 Hz to 30 MHz and a sensitivity of 5 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP1200XS-80
zł4,942.14
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 3000 A, offering a wide bandwidth from 4 Hz to 30 MHz and a sensitivity of 2 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP3000XS-80
zł4,942.14
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 6000 A, offering a wide bandwidth from 4 Hz to 30 MHz and a sensitivity of 1 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP6000XS-80
zł4,821.60
4 weeks
No product available!
Rogowski current probe designed for measuring high-amplitude AC currents up to 12,000 A, offering a wide bandwidth from 2 Hz to 30 MHz and a sensitivity of 0.5 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful for analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP12000XS-80
zł4,942.14
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude AC currents up to 300 A, offering a wide bandwidth from 10 Hz to 20 MHz and a sensitivity of 20 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP300XS-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude alternating currents up to 600 A, offering a wide bandwidth from 7 Hz to 20 MHz and a sensitivity of 10 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP600XS-200
zł5,338.20
4 weeks
No product available!
Rogowski current probe designed for measuring very high-amplitude AC currents up to 1200 A, offering a wide bandwidth from 5 Hz to 20 MHz and a sensitivity of 2 mV/A. Its near-zero impedance enables accurate measurements without affecting the circuit under test, which is useful in analyzing fast waveforms and power systems (MOSFETs, IGBTs, SiC, GaN). Micsig RCP1200XS-200
zł5,462.43
4 weeks
No product available!
The Micsig DP series differential probe is based on advanced metal shielding technology. It offers a 200 MHz frequency band and the ability to measure voltages up to 7000 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP7002