

Power supply module with a basket for a 18650 battery. Charging takes place via a micro USB and USB type C connector with a maximum current of 800 mA. The device can supply a voltage of 3 V and 1 A (3 pads on the periphery of the board) or 5 V and 2 A (USB type A connector or 3 pads sets). There is a power switch on the board and an LED indicator that indicates the charging status. The module can be used as a power supply for portable devices or an emergency charging source, e.g. for phones or tablets.
Attention!
Pay special attention to the correct polarity of the batteries in the basket (reverse polarity may damage the module).
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
18650 Li-Ion battery with a nominal voltage of 3.7V and a capacity of 3000mAh. Sony US18650VTC6
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CA-USBM-10CC-0010-BK
Li-Ion battery type 18650 with a nominal voltage of 3.7 V and a capacity of 3400 mAh. Panasonic NCR-18650B
Powerbank module with a basket for two 18650 batteries. It can supply 3 V and 1 A or 5 V and 2 A
A handy set with a charger to build a Power Bank based on 18650 batteries. The set does not include a battery.
Powerbank with solar charging function. It has a built-in photovoltaic cell, a lithium-polymer battery with a capacity of 5000mAh, two USB outputs and a white diode, acting as a flashlight. The side walls of the powerbank are made of rubber.
Powerbank module with a basket for a 18650 battery. It can provide a current of 3 V and 1 A or 5 V and 2 A
Universal device for checking the battery condition with a built-in balancer and the function of analyzing PWM, PPM and S.BUS signals. The device can handle Li-Ion, LiPo, LiFe,LiHV, Ni-Cd and Ni-MH battery packs from 1S to 8S. ISDT BattGo BG-8S
No product available!
Akyga AK-PS-04 is a portable emergency power source with multiple ports, ideal for portable and larger devices such as travel refrigerators. It has three USB ports (including one type C), two 5.5x2.1 mm DC sockets, a 12 V cigarette lighter socket and two AC sockets. It can power up to 8 devices simultaneously. It is equipped with an LCD display to monitor the operating status and battery charge level. It can be charged via USB-C, a 120 W power supply or photovoltaic panels. Perfect for outdoor travel and emergency power. Akyga AK-PS-04
No product available!
The modIP5328P module enables the construction of power banks with bidirectional fast charging support in QC3.0, USB PD, FCP, AFC, and other standards, with power up to 18 W. It supports power input and charging via USB-A, USB-C, and Micro USB, providing high conversion efficiency and an extensive protection system. modIP5328P
No product available!
Akyga AK-PS-02 is an advanced portable power station with high capacity and output, designed for a wide range of outdoor and emergency applications. Thanks to its diverse ports, it allows simultaneous charging and powering of multiple devices, from consumer electronics to medical equipment. It performs well during outdoor expeditions, on allotments, in campers, and as emergency backup power at home, offering energy independence and complete user safety.
No product available!
Powerbank module with a basket for two 18650 batteries. It can supply 3 V and 1 A or 5 V and 2 A
Power supply module with a basket for a 18650 battery. It can provide a current of 3 V and 1 A or 5 V and 2 A