Starter Cable Kit for Elroy Carrier

Module with minicamera based on IMX219 matrix with 8 MPx operation for Nvidia Jetson Nano, with 300 mm tape. ArduCAM B0185

Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with a USB 3.0, USB 2.0 OTG, HDMI, GbE connector, as well as a micro SD card slot. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG003

7.9" LCD IPS display with touch screen. The display is equipped with HDMI interface for image display and USB for touch screen. High resolution 400x1280 pixels. Waveshare 7.9inch HDMI LCD

Universal case adapted to most popular single-board computers, incl. ODYSSEY-X86J4105, Raspberry Pi, BeagleBone, and Jetson Nano. Seeed Studio 114992152

The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano

The JETSON-ORIN-POE-MODULE offers a compact IEEE 802.3af/at-compliant solution for simultaneous power supply and data transmission in devices based on Jetson Orin Nano and NX. It is ideal for environments where cable minimization and space-saving are essential, such as in industrial applications, robotics, automation, and edge AI systems.

An 8MP camera designed to work with NVIDIA Jetson boards, as well as other systems such as ARM, DSP, and FPGA, offering a wide field of view and high image quality. The camera is very sensitive to infrared light due to the lack of an IR filter, which allows it to be used in applications such as night vision systems, heat detection, and robotic vision systems. ArduCAM B0193

5G/4G/3G and GNSS module with SIM8202G-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8202G-M2 5G for Jetson Nano (EU)

Base plate for NVIDIA Jetson TX2 / TX2i and Jetson TX1 modules. Equipped with 2 Gigabit Ethernet, HDMI, USB 3.0, USB 2.0, USB CLIENT ports, as well as miniPCIe extension, mSATA and optional GPS / GNSS module. Connect Tech ASG006 / ASG009

Camera for Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was equipped with a Sony IMX477 sensor with a resolution of 12.3 MPx and a built-in IR filter. Waveshare IMX477-160 12.3MP Camera

A set with two IMX477 cameras with a resolution of 12 MP and an expansion module for Jetson Nano and Xavier NX, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0265N

Dedicated cooling fan for NVIDIA Jetson Nano mini computers. Powered by 5V, controlled by PWM signal. Waveshare Fan-4020-PWM-5V

Camera with a resolution of 8 MPx with a USB interface. Equipped with a CMOS IMX219 sensor with a lens with a viewing angle of 62° and a 30 cm extension cord. ArduCAM B0320

Cooling fan dedicated to the NVIDIA Jetson Nano minicomputer. Waveshare NANO-FAN-PWM

IPS 4" LCD display with touch screen. Equipped with HDMI interface for image display and USB type C and I2C for touch screen. Resolution 720x720 pixels. Waveshare 4inch HDMI LCD (C)

The GMSL adapter with the MAX9296A chip enables integration of two GMSL cameras with Jetson Orin platforms, ensuring reliable high-bandwidth, low-latency video transmission. With support for PoC and broad compatibility with camera models and development boards, the module is suitable for use in ADAS systems, industrial automation, surveillance, and smart city applications.