Radiator for NVIDIA Jetson TX1 / TX2 modules

5G/4G/3G and GNSS module with SIM8200EA-M2 chip. It allows you to make phone calls, SMS support, cloud communication and has support for GPS, Galileo, BeiDou, Glonass and QZSS. Waveshare SIM8200EA-M2 5G for Jetson Nano (EU)

Minicomputer with built-in NVIDIA Jetson Nano module with 4 GB RAM. In an aluminum case, it has the JetPack installed. Seeed Studio 110061362

Camera module with Sony IMX219 sensor designed to work with NVIDIA Jetson Nano and RPi Compute Module. The camera is equipped with a matrix with a resolution of 8 MPx and has a viewing angle of 162°. Waveshare IMX219-160 IR-CUT Camera

Development kit with an SoC containing eight 64-bit ARM v8.2 cores and a Volta graphics chip consisting of 512 cores supporting CUDA, cuDNN and TensorRT technologies. Equipped with 32 GB RAM and 128 GB SSD drive. Auvidea X221D-AGX32-128GB

A two-part metal case with a fan designed to build a set with Orbitty Carrier and NVIDIA Jetson TX1 or NVIDIA Jetson TX2. Connect Tech ENC001+XHG302

Base board for NVIDIA Jetson TX1, NVIDIA Jetson TX2 or NVIDIA Jetson TX2i modules. It is equipped with MIPI CSI-2 connector, USB OTG, UART and I2C. It is characterized by great possibilities with small tile dimensions. Connect Tech ASG008

Base board for NVIDIA Jetson AGX Xavier modules. Equipped with MIPI CSI-2, NVMe M.2 Key M, HDMI, USB 3.1, Ethernet (RJ-45), CAN Bus and power connector. Connect Tech AGX101

1 MPx camera module with OV9281 sensor working with NVIDIA Jetson Nano. Equipped with a shutter and M12 lens mount, it is characterized by good sensitivity. ArduCAM B0223

The module is equipped with three 5A / 250VAC relays controlled by digital outputs. Relay contacts are led out to ARK screw terminals. Designed to work with NVIDIA Jetson Nano. Waveshare 3-CH Relay for Jetson Nano

Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 99° angle of view. Waveshare IMX462-99 2MP Starlight Camera

Case made of transparent plastic designed for Nvidia Jetson Nano. It protects the minicomputer against dust and mechanical damage. Waveshare Jetson Nano Case (A)

NVIDIA module with the NVIDIA Carmel ARMv8.2 CPU and NVIDIA Volta graphics consisting of 384 cores supporting CUDA technology and 48 Tensor cores. The system is supported by DDR4 RAM with a capacity of 8 GB, DisplayPort interface, HDMI, USB 3.1, PCIe and MIPI-CSI cameras 900-83668-0000-000.

A set with four OV9281 cameras with a resolution of 1MP and an expansion module for Raspberry Pi, Jetson Nano and Xavier NX, which allows you to simultaneously connect four cameras to the minicomputer. ArduCAM B0267

Camera for Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was equipped with a Sony IMX477 sensor with a resolution of 12.3 MPx and a built-in IR filter. Waveshare IMX477-160 12.3MP Camera

The case is designed for NVIDIA Jetson Nano minicomputers. It is made of aluminum, has a built-in power and reset button and space for a fan or heatsink. Waveshare Jetson Nano Case (F)

Uninterruptible power supply module for Jetson Nano, allowing to continue operation and safe shutdown of the minicomputer after a power failure. AC adapter included. Waveshare UPS Power Module (B) (EU)