BNC Oscilloscope Probes (pair)

Insulated fiber optic probe with a measuring range up to 2500 V. It works in the band up to 500 MHz, it can be connected to the oscilloscope via the BNC connector. Comes with a 10X attenuation tip. Micsig MOIP500P

Micsig DP series differential probe based on advanced SigOFIT technology. It offers a frequency band of 100 MHz and the ability to measure voltage up to 1500 V. It uses the popular BNC connector and is powered by a USB Type-C connector. Micsig DP1500

Test probe tip with 2000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 350 MHz and 500 MHz frequency bands. Micsig OP2000-5

6-wire test leads that allow the oscilloscope to be connected to various components in the engine compartment without stripping or puncturing the insulation and without risking damage to the connectors. Hantek HT306-2.8mm

Digital oscilloscope with compact dimensions. It offers a frequency bandwidth of 200 kHz and a sampling rate of 2.5 MS/s. Equipped with a 2.8" colour display with a resolution of 320x240 pixels. Fnirsi DSO152 set

A 3-in-1 device that combines a digital oscilloscope with an LCR tester and a DDS generator. It allows oscilloscope measurements and testing of electronic components, including diodes and transistors, as well as generation of digital signals. Fnirsi DSO-TC3

Digital oscilloscope with compact dimensions. It offers a frequency bandwidth of 200 kHz and a sampling rate of 2.5 MS/s. Equipped with a 2.8" colour display with a resolution of 320x240 pixels. Fnirsi DSO152

Portable Tablet Oscilloscope with 8-inch LCD display and touch screen. It has two channels and is characterized by good measurement parameters: 200 MHz bandwidth, 1 GSa/s sampling rate and 70 Mpts memory buffer. Micsig STO2002

Cable (adapter) of a BNC connector to banana plugs. Allows convenient connection of a device to an oscilloscope, for example. BNC Q9

A set of needle probes used for piercing wire insulation. They can be used as pin probes when working with small PCBs or connectors. Hantek HT307

Fnirsi DSO153 is a portable oscilloscope with high functionality, ideal for hobbyists in electronics. With its compact design, high-resolution display, and long battery life, this device is perfect for use in the field and in the workshop. The built-in signal generator and easy operation with a single AUTO button further enhance its versatility. Fnirsi DSO153

A probe tip with a 5000X attenuation factor. Dedicated to Micsig probes from the SigOFIT series operating in the 1 GHz frequency band. Micsig OP5000-1G

High-voltage oscilloscope probe with BNC connector and 100:1 voltage divider. It has a frequency response of 100 MHz and allows measurements with a maximum voltage of up to 2 kV. Hantek T3100

Rogowski-type current probe for precise measurements of alternating currents with a frequency of up to 30 MHz. Thanks to the flexible coil of 1.6 mm thickness and almost zero impedance introduced, it is ideal for work in hard-to-reach places of power systems. The integrated amplifier and BNC interface enable accurate measurements and easy integration with oscilloscopes, making it an ideal tool for R&D laboratories and power electronics services. Micsig RCP300XS

A 6-in-1 multifunctional measuring tool in the form of an extremely compact and portable device. It combines the functions of an oscilloscope, recorder, multimeter, spectrum analyzer, frequency counter and signal generator. Hantek DSO8152E

Portable oscilloscope for automotive applications with a 10.1" LCD display and touchscreen. It offers four measurement channels and features good measurement performance: a bandwidth of 300 MHz, a sampling rate of 2 GSa/s and a memory buffer of 220 Mpts. Micsig ATO3004