![Main view Main view](https://kamami.pl/71466-large_default/wizfi360-evb-pico-board-with-rp2040-microcontroller-and-wizfi360-wifi-module.jpg)
![Main view Main view](https://kamami.pl/71466-large_default/wizfi360-evb-pico-board-with-rp2040-microcontroller-and-wizfi360-wifi-module.jpg)
zł30.81 tax excl.
The board features the Raspberry Pi Foundation's RP2040 microcontroller and the WizFi360 module, which provides 2.4GHz WiFi communication over 802.11 b/g/n. WIZnet WizFi360-EVB-Pico
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The board features the Raspberry Pi Foundation's RP2040 microcontroller and the WizFi360 module, which provides 2.4GHz WiFi communication over 802.11 b/g/n.
The RP2040 is a microcontroller equipped with two ARM Cortex M0+ cores clocked at 133 MHz, 264 kB of RAM and 30 ports with I2C, SPI, UART and USB interfaces. It has a 2MB external Flash memory connected via a QSPI interface with eXecute In Place (XIP). The chip can be programmed in C/C++ or microPython.
WizFi360 is a low-cost and low-power industrial-grade WiFi module. It complies with the IEEE802.11 b/g/n standard and supports SoftAP, Station and SoftAP+Station modes. The transmission speed of the serial port can be up to 2Mbps to meet the requirements of various applications.
Płytka zasilana jest przez złącze micro USB typu B, które jest wykorzystywane także jako interfejs do programowania pamięci Flash. Mikrokontroler może być programowany i debugowany za pomocą 3-pinowego złącza Serial Wire Debug (SWD). Za zapewnienie prawidłowego zasilania odpowiada wbudowany stabilizator LDO.
All leads of the WizFi-EVB-Pico are directly connected to the GPIO of the RP2040. The module has the same pinout as the Raspberry Pi Pico board except for GPIO4, GPIO5, GPIO6, GPIO7, GPIO20, which are connected to WizFi360 on the board. These pins enable communication through the UART interface with WizFi360 and use the Wi-Fi function.
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00052
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-LCD-0.96-M
Base board with soldered Raspberry Pi Pico W module. Equipped with numerous connectors, buzzer, buttons and LEDs. Cytron MAKER-PI-PICO-MINI-W
Board with RP2040 microcontroller and W6100 network chip. The module is equipped with an Ethernet interface. WIZnet W6100-EVB-Pico
A board with an RP2040 microcontroller and a LoRa RF95 module operating in the 868 MHz frequency band. It has a built-in LiPo charging circuit and STEMMA QT connector. Ideal for IoT projects. Adafruit 5714
Module with round 1.28" IPS LCD display and 240x240 px resolution and RP2040 chip. SB Components 24018
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 5302
Development board with RP2040 and ESP-12E microcontroller. Equipped with 0.91" OLED display. SB Components 24186
Module with a round 1.28" IPS LCD touch display with a resolution of 240x240 px and an RP2040 microcontroller. Equipped with an accelerometer and gyroscope. Enclosed in a nice metal housing. Waveshare RP2040-Touch-LCD-1.28-B
Mini board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz and 264 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM558
No product available!
Game console based on the RP2040 microcontroller from Raspberry Pi. Equipped with a 1.54" LCD display, LiPo battery and aluminum housing. It has API support that allows you to create your own games in C++ and MicroPython. Pimoroni PIM559
No product available!
Development board equipped with RP2040 microcontroller, RGB LED diodes, buzzer and Qwiic/STEMMA QT connectors. Pin spacing compatible with Arduino Nano. Cytron MAKER-NANO-RP2040
LED strip driver module dedicated to the WS2812, Neopixel and SK6812. Designed to easily and quickly create animations using popular RGB LED strips. Pimoroni PIM653
The RP2040 microcontroller board features two ARM Cortex-M0+ cores that operate at 133 MHz. It has 264 kB of RAM, and the board also includes 16 MB of QSPI Flash memory. The chip can be programmed in C/C++ or MicroPython. Board with connectors. Waveshare RP2040-Plus-16MB-M
Development board with RP2040 microcontroller. Equipped with a microBUS connector, it can work with Qwiic expansion boards. SprakFun DEV-18721
Board with RP2040 microcontroller and MCP2515 CAN controller. It has a built-in LiPo charging circuit and a STEMMA QT connector. It allows you to add communication based on the CAN bus to the project, commonly used in projects related to robotics and the automotive industry. Adafruit 5724
The board features the Raspberry Pi Foundation's RP2040 microcontroller and the WizFi360 module, which provides 2.4GHz WiFi communication over 802.11 b/g/n. WIZnet WizFi360-EVB-Pico