Feather RP2040 SCORPIO - 8-channel NeoPixel controller with RP2040 microcontroller
ID: 1183980
5906623431533
zł82.37
Tax included
zł66.97 tax excl.
NeoPixel 8-channel RGB LED driver. It features an RP2040 microcontroller with two ARM Cortex-M0+ cores, 264 kB of RAM and 8 MB of external Flash memory. Adafruit 5650
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
The Adafruit Feather RP2040 SCORPIO is a board featuring the RP2040 microcontroller designed by the Raspberry Pi Foundation. The chip has two ARM Cortex M0+ cores running at up to 133 MHz and 264 kB of RAM. The microcontroller is not equipped with flash memory, but there is an external memory of 8 MB on the board connected via the QSPI interface.
On the board, in addition to the RP2040 chip and flash memory, the user will find a 3.3V voltage stabilizer, Boot and Reset buttons, NeoPixel LEDs and RGB LEDs, a USB type C connector for powering and programming the module, and 21 GPIO outputs, where peripherals such as four 12-bit ADC inputs, 16 PWM outputs, two I2C, SPI and UART interfaces are brought out.
The module is designed to control NeoPixel (WS2812) RGB LED strips. It has 8 PWM outputs connected to DMA so that the process of controlling NeoPixel LEDs puts very little load on the microcontroller core. The board has a rich set of other interfaces, which makes it successfully applicable to other projects as well.
The platform supports the popular MicroPython and C/C++ programming languages. Programs can be loaded into the memory via USB using the built-in bootloader or an external programmer via the SWD interface. Full documentation and usage examples are available on the product page.
Features
- RP2040 microcontroller designed by Raspberry Pi
- Two ARM Cortex-M0+ cores clocked at up to 133 MHz
- 264 kB of on-board SRAM
- Real-time clock (RTC)
- 3.3 V 500 mA voltage regulator
- 200 mA battery charging circuit
- Built-in USB Type C connector for programming with USB 1.1 operating in Host and Device modes
- 21 x multi-function GPIO pins
- 4 x 12-bit ADC inputs with internal temperature sensor, 0.5 MSa/sec.
- 16 PWM channels
- 2 x UART
- 2 x I2C
- 2 x SPI
- 8 outputs to control NeoPixel LEDs (WS2812)
- Reset and Boot buttons
- LED and NeoPixel LEDs
- LiPo battery connector
- STEMMA QT connector compatible with Qwiic and Grove systems
- SWD interface connector
- 8 MB of external flash memory
- Supported programming languages: CircuitPython and C/C++
- Dimensions: 52 x 22.8 x 7.2 mm
Kit contains
- Feather RP2040 SCORPIO development board
- Connector kit
1183980
You might also like
Flora NeoPixel 60 RGB LED Strip in Reel - White Backing. Adafruit 1138
zł184.25
Delivery date unknown
No product available!
Flora NeoPixel 30 RGB LED Strip in Reel - White Backing. Adafruit 1376
zł113.18
Delivery date unknown
No product available!
Waterproof NeoPixel tape with RGB LED diodes with a length of 2 m, 60 LEDs per meter, diodes are mounted on an elastic PCB in black. Adafruit 1376
zł326.37
24h
Available quantity: 1
Available
Cable with USB type A and USB type C plugs, length 1m, white
zł7.24
Delivery date unknown
No product available!
Cable with USB type A and USB type C plugs, length 2m, white
zł9.35
24h
Available quantity: 13
Available
4-wire cable with a length of 100 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4210
zł6.62
24h
Available quantity: 11
Available
4-core cable with a length of 200 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4401
zł8.68
24h
Available quantity: 1
Available
4-core cable with a length of 300 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 5384
zł7.27
24h
Available quantity: 3
Available
Other products in the same category (16)
Development board based on the RP2040 microcontroller. It is equipped with a 1.14" color LCD display and a built-in debugging tool via USB interface. The board is enclosed in a plastic housing. Waveshare RP2040-GEEK
zł53.90
24h
Available quantity: 9
Available
Board with RP2040 microcontroller and W6100 network chip. The module is equipped with an Ethernet interface. WIZnet W6100-EVB-Pico
zł58.90
24h
Available quantity: 12
Available
The RP2040 microcontroller board features two ARM Cortex-M0+ cores that operate at 133 MHz. It has 264 kB of RAM, and the board also includes 16 MB of QSPI Flash memory. The chip can be programmed in C/C++ or MicroPython. Board with connectors. Waveshare RP2040-Plus-16MB-M
zł53.80
24h
Available quantity: 3
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4884
zł79.03
24h
Available quantity: 9
Available
Board with RP2040 microcontroller and W5100S network chip. The module is equipped with an Ethernet connector. WIZnet W5100S-EVB-Pico
zł59.90
Delivery date unknown
No product available!
Module with a 2.9" ePaper display and a Raspberry Pi Pico W board equipped with WiFi communication. It has a built-in Qwiic/Stemma QT connector with an I2C interface, buttons and a battery connector. Perfect as a display for a weather station. Pimoroni PIM669
zł282.91
Delivery date unknown
No product available!
MicroMod main module with RP2040 microcontroller. Equipped with an M.2 connector, it can work with MicroMod expansion boards. SprakFun DEV-17720
zł77.32
24h
Available quantity: 2
Available
CAN 2.0 and CAN FD module with CAN GD32E103CBT6D controller. Equipped with RP2040 microcontroller. Seeed Studio 102991674
zł111.67
Delivery date unknown
No product available!
Module with a differential pressure sensor based on the MPXV5010DP system. It uses a 22-bit ADC and allows the measurement of the pressure difference between two inlets in the range of up to 10 kPa. Comes with a soldered Raspberry Pi Pico W board. SB Components 26173
zł527.35
24h
Available quantity: 2
Available
Servo driver based on the Raspberry Pi RP2040 microcontroller. It allows you to control up to 18 servos, has 6 analog inputs and a QW/ST connector for connecting additional sensors. Pimoroni PIM613
zł129.90
24h
Available quantity: 8
Available
Game console based on the RP2040 microcontroller from Raspberry Pi. Equipped with a 1.54" LCD display, LiPo battery and aluminum housing. It has API support that allows you to create your own games in C++ and MicroPython. Pimoroni PIM559
zł348.98
4 weeks
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 4 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM578
zł66.22
24h
Available quantity: 9
Available
Module with round 1.28" IPS LCD display and 240x240 px resolution and RP2040 chip. SB Components 24018
zł190.51
24h
Available quantity: 4
Available
A board with an RP2040 microcontroller equipped with two ARM Cortex-M0+ cores that operate at a frequency of 133 MHz and 264 kB RAM. There is also 16 MB of QSPI Flash memory on the board. The system can be programmed in C/C++ or MicroPython. It offers a DVI connector, a micorSD card slot and a 40-pin GPIO connector. The module has a shape and connector arrangement similar to the popular Raspberry Pi Zero minicomputers. Waveshare RP2040-PiZero
zł45.62
24h
Available quantity: 5
Available
Mini board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz and 264 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Pimoroni PIM558
zł52.90
4 weeks
No product available!
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00052
zł139.00
24h
Available quantity: 27
Available
NeoPixel 8-channel RGB LED driver. It features an RP2040 microcontroller with two ARM Cortex-M0+ cores, 264 kB of RAM and 8 MB of external Flash memory. Adafruit 5650