![W5100S-EVB-Pico - board with RP2040 microcontroller and W5100S Ethernet W5100S-EVB-Pico - board with RP2040 microcontroller and W5100S Ethernet](https://kamami.pl/47575-large_default/w5100s-evb-pico-board-with-rp2040-microcontroller-and-w5100s-ethernet.jpg)
![W5100S-EVB-Pico - board with RP2040 microcontroller and W5100S Ethernet W5100S-EVB-Pico - board with RP2040 microcontroller and W5100S Ethernet](https://kamami.pl/47575-large_default/w5100s-evb-pico-board-with-rp2040-microcontroller-and-w5100s-ethernet.jpg)
zł48.70 tax excl.
Board with RP2040 microcontroller and W5100S network chip. The module is equipped with an Ethernet connector. WIZnet W5100S-EVB-Pico
free shipping in Poland for all orders over 500 PLN
If your payment will be credited to our account by 11:00
Each consumer can return the purchased goods within 14 days
The board is equipped with the RP2040 microcontroller designed by the Raspberry Pi foundation. The system has two ARM Cortex M0 + cores operating at a frequency of 133 MHz and 264 KB of RAM. The microcontroller is not equipped with flash memory, but on the board there is an external memory with a capacity of 2 MB connected via the QSPI interface.
In addition to the RP2040 system and Flash memory, the user has at his disposal a 3.3 V voltage stabilizer, Boot buttons, a microUSB connector for powering and programming the module and GPIO outputs, on which such parameters as 12-bit ADC inputs, PWM, I2C interface are derived , SPI and UART.
The module is equipped with the W5100S chip, which communicates via the SPI interface, has a built-in TCP/IP stack and supports such protocols as TCP, UDP, IPv4, ICMP, ARP, IGMP and PPPoE. The module supports the Wake on LAN over UDP function. It provides a stable connection with the Internet and works well as an element of e.g. IoT devices.
W5100S-EVB-Pico has the same conclusions as the Raspberry Pi Pico board. However, GPIO16, GPIO17, GPIO18, GPIO19, GPIO20, GPIO21 are connected to the W5100S.
The platform supports the popular MicroPython and C/C++ programming languages. Programs can be uploaded to memory via USB interface or via SWD connector.
Pin header goldpin black 1x40 pins. Straight connector for through-hole assembly. 2.54mm pitch.
Patchcord UTP 5E Ethernet cable with a length of 2 m - red, with 2xRJ45 connectors
No product available!
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CA-USBM-10CC-0010-BK
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
The RP2040 microcontroller board features two ARM Cortex-M0+ cores that operate at 133 MHz. It has 264 kB of RAM, and the board also includes 16 MB of QSPI Flash memory. The chip can be programmed in C/C++ or MicroPython. Waveshare RP2040-Plus-16MB
Module with LCD 2.4" display with a resolution of 320x240 px and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM636
Board with RP2040 microcontroller and W6100 network chip. The module is equipped with an Ethernet interface. WIZnet W6100-EVB-Pico
The board with the RP2040 microcontroller in the form of a USB dongle. Equipped with Stemma QT connector, RGB NeoPixel diode, boot and reset button. Adafruit 5056
Module with RP2040 microcontroller dedicated to matrix displays with HUB75 interface. Pimoroni PIM584
No product available!
Module with a 1.14" IPS LCD display with a resolution of 240x135 px and a monochrome HM01B0 camera. Equipped with an RP2040 microcontroller. Waveshare PICO-Cam-A
The board features the Raspberry Pi Foundation\'s RP2040 microcontroller and the WizFi360 module, which provides 2.4GHz WiFi communication over 802.11 b/g/n. WIZnet WizFi360-EVB-Pico
Arduino development board with RP2040 microcontroller. Equipped with WiFi and Bluetooth module, 6-axis IMU system with accelerometer and gyroscope, MEMS microphone, RGB LED diode and cryptographic system. Arduino ABX00052
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Seeed Studio 102010428
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 256 kB RAM. The board also has 8 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Adafruit 4884
Matrix display module with Raspberry Pi Pico W control board. It has built-in 583 RGB LEDs in a 53 x 11 layout, an amplifier with speaker and buttons. Ideal for building a clock, displaying sensor data or presenting weather data. Pimoroni PIM631
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-LCD-0.96
Versatile digital video module. It uses two RP2040 chips (one in the form of a Raspberry Pi Pico W board and the other as a separate RP2040 microcontroller) and is equipped with an HDMI output connector. Pimoroni PIM674
No product available!
Development board with RP2040 microcontroller. Equipped with a driver for DC motors, servos and Grove connectors. Dedicated to the construction of robots. Cytron MAKER-PI-RP2040
Evaluation board with a Raspberry Pi RP2040 microcontroller and a TCP/IP W5500 controller. WIZnet W5500-EVB-PICO
No product available!
Module with ePaper 2.9" display and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM610
Board with RP2040 microcontroller and W5100S network chip. The module is equipped with an Ethernet connector. WIZnet W5100S-EVB-Pico