RP2040 CAN Bus Feather - board with RP2040 microcontroller and CAN controller
ID: 1185637
zł108.95
Tax included
zł88.58 tax excl.
Board with RP2040 microcontroller and MCP2515 CAN controller. It has a built-in LiPo charging circuit and a STEMMA QT connector. It allows you to add communication based on the CAN bus to the project, commonly used in projects related to robotics and the automotive industry. Adafruit 5724
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Feather RP2040 is a board equipped with the RP2040 microcontroller designed by the Raspberry Pi Foundation. The system has two ARM Cortex M0+ cores operating at a frequency of up to 133 MHz and 264 kB of RAM. The microcontroller is not equipped with flash memory, but on the board there is an external memory with a capacity of 8 MB connected via the QSPI interface.
On the board, apart from the RP2040 system and Flash memory, the user will find a 3.3 V voltage stabilizer, Boot and Reset buttons, LEDs and RGB NeoPixel, USB type C connector for powering and programming the module and 21 GPIO outputs on which such peripherals were derived such as four 12-bit ADC inputs, 16 PWM outputs, two I2C, SPI and UART interfaces. Additional sensors can be easily connected via the STEMMA QT connector and the I2C interface.
An important element of the board is the CAN MCP2515 controller with the SPI interface. CAN (Controller Area Network) is a communication protocol used mainly in industry, automotive and other applications where reliable and fast communication between devices is required. The CAN protocol allows data transmission speeds of up to 1 Mbps and is often used in systems where time synchronization and high reliability are required.
The platform supports the popular MicroPython and C/C++ programming languages. Programs can be uploaded to the memory via the USB interface using the built-in bootloader. Full documentation is available on the product page.
Features
- RP2040 microcontroller designed by Raspberry Pi
- Two ARM Cortex-M0+ cores clocked up to 133 MHz
- 264 kB onboard SRAM
- Real Time Clock (RTC)
- MCP2515 CAN controller
- 120 ohm resistor
- Voltage stabilizer 3.3V 500mA
- 200 mA battery charging circuit
- Built-in USB Type-C connector for programming with USB 1.1 operating in Host and Device modes
- 21 x multifunctional GPIO pins
- 4 x 12-bit ADC inputs with internal temperature sensor, 0.5 MSa/s
- 16 PWM channels
- 2 x UARTs
- 2 x I2C
- 2 x SPI
- Reset and Boot buttons
- LED and NeoPixel
- LiPo battery connector
- STEMMA QT connector compatible with Qwiic systems
- SWD interface connector
- 8 MB external Flash memory
- Supported programming languages: MicroPython and C/C++
- Dimensions: 52.2 x 22.8 x 12mm
Kit contains
- RP2040 CAN Bus Feather module
- 2 x 16-pin male goldpin connector
1185637
You might also like
Cable with USB type A and USB type C plugs, length 1m, white
zł7.24
24h
Available quantity: 3
Available
Cable with USB type A and USB type C plugs, length 2m, white
zł9.35
24h
Available quantity: 16
Available
Other products in the same category (16)
Mechanical mini keyboard with 16 buttons and backlight. Based on the RP2040 chip, it uses Kailh Speed Silver buttons. Pimoroni PIM561
zł324.87
24h
Available quantity: 1
Available
Module with a 7-color ACeP e-Paper display with a diagonal of 7.3" and a resolution of 800 x 480 pixels, equipped with Raspberry Pi Pico W. It offers WiFi communication and has built-in buttons with LED indicators, which allows you to build a simple user interface. Included with accessories. Pimoroni PIM671
zł729.00
Delivery date unknown
No product available!
Development board with RP2040 microcontroller. Equipped with a driver for DC motors, servos and Grove connectors. Dedicated to the construction of robots. Cytron MAKER-PI-RP2040
zł62.90
24h
Available quantity: 14
Available
Module with a 7-color ACeP e-Paper display with a diagonal of 7.3" and a resolution of 800 x 480 pixels, equipped with Raspberry Pi Pico W. It offers WiFi communication and has built-in buttons with LED indicators, which allows you to build a simple user interface. Pimoroni PIM655
zł652.22
Delivery date unknown
No product available!
NeoPixel 8-channel RGB LED driver. It features an RP2040 microcontroller with two ARM Cortex-M0+ cores, 264 kB of RAM and 8 MB of external Flash memory. Adafruit 5650
zł82.37
24h
Available quantity: 9
Available
A board with an RP2040 microcontroller equipped with two ARM Cortex-M0+ cores that operate at a frequency of 133 MHz and 264 kB RAM. There is also 16 MB of QSPI Flash memory on the board. The system can be programmed in C/C++ or MicroPython. It offers a DVI connector, a micorSD card slot and a 40-pin GPIO connector. The module has a shape and connector arrangement similar to the popular Raspberry Pi Zero minicomputers. Waveshare RP2040-PiZero
zł46.16
6 weeks
No product available!
A 1.28" circular IPS LCD display module with touch panel. It has a resolution of 240x240 px and is controlled by an RP2040 microcontroller. It is equipped with an accelerometer and a gyroscope. Waveshare RP2040-Touch-LCD-1.28
zł106.04
24h
Available quantity: 2
Available
The RP2040 microcontroller board features two 133 MHz ARM Cortex-M0+ cores and 264 kB of RAM. The board also includes 2 MB of QSPI Flash memory. The chip can be programmed in C/C++, CircuitPython or MicroPython. DFRobot DFR0959
zł42.69
24h
Available quantity: 6
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040
zł29.90
24h
Available quantity: 88
Available
USB RTC module based on Raspberry Pi RP2040 microcontroller. It combines MicroSD card slot, LCD display and CR1220 battery holder. SB Components SKU25138
zł296.82
24h
Available quantity: 3
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0+ cores, which work at a frequency of 133 MHz, 264 kB RAM. The board also has 2 MB of QSPI flash memory. The system can be programmed in C/C++ or MicroPython. Waveshare RP2040-Zero-M
zł21.72
24h
Available quantity: 3
Available
Board with RP2040 microcontroller and W6100 network chip. The module is equipped with an Ethernet interface. WIZnet W6100-EVB-Pico
zł58.90
24h
Available quantity: 18
Available
Board with the RP2040 microcontroller in the form of a USB dongle. Equipped with edge connectors, RGB LED, boot and reset button. Waveshare RP2040-One
zł25.01
24h
Available quantity: 9
Available
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + 133 MHz cores, 264 kB RAM. The board also has 8 MB of QSPI flash memory. The circuit can be programmed in C/C++, CircuitPython or MicroPython. Adafruit 5302
zł50.37
24h
Available quantity: 4
Available
Development board based on the RP2040 microcontroller. It is equipped with a 1.14" color LCD display and a built-in debugging tool via USB interface. The board is enclosed in a plastic housing. Waveshare RP2040-GEEK
zł53.90
24h
Available quantity: 10
Available
Module with LCD 2.4" display with a resolution of 320x240 px and RP2040 microcontroller. Equipped with QW/ST connector. Accessories included. Pimoroni PIM636
zł185.58
24h
Available quantity: 5
Available
Board with RP2040 microcontroller and MCP2515 CAN controller. It has a built-in LiPo charging circuit and a STEMMA QT connector. It allows you to add communication based on the CAN bus to the project, commonly used in projects related to robotics and the automotive industry. Adafruit 5724