Tamiya Plug with 10cm Leads, Female
This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that it will not become disconnected. This female Tamiya connector has 10cm 14-AWG leads with stripped and tinned terminations.
![]() |
This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector, sometimes called Tamiya or Kyosho, is keyed so that power cannot be reversed. A latch secures the connection so that it will not become disconnected.
This is the female version of the connector (we also offer a matching male version). Two 10cm 14-AWG wires are crimped inside the connector housing and extend 9cm past the plastic housing. The leads have silicone insulation and stripped, tinned terminations. As an alternative, we sell a Tamiya connector pack that includes housings and crimp pins you can use to attach these female connectors to your own wires.
Note: these Tamiya connectors are sometimes referred to as “male” in the RC hobby industry, so please look at the connector picture below carefully to make sure it is what you want.
|
|
![]() |
| Female Tamiya plug dimensions (in mm). |
|---|
Note: This connector is also available in the smaller mini Tamiya version.
![]() |
Tamiya Plug with 10cm Leads, Male |
![]() |
0.1" (2.54mm) Crimp Connector Housing: 1x3-Pin 25-Pack |
![]() |
Female Crimp Pins for 0.1" Housings 100-Pack |
Manufacturer
Responsible person
A 7-pin cable with a length of 30 cm, terminated on both sides with a Molex Picoblade 1.25 mm plug
Adapter from 16-pin OBD2 connector to DB9 connector on a 100 cm long cable
Hermetic 3-pin connector with cable. The set includes two bundles, each 20 cm long, with a male plug and a female socket
RS-232 D-Sub (f) / D-Sub (m) cable, 2 m long. Akyga AK-CO-01
No product available!
USB - RS-232 USB A (m) / D-Sub (m) cable with a length of 1 m. Akyga AK-CO-02
RS-232 D-Sub (m) / D-Sub (m) cable 2 m long, uncrossed. Akyga AK-CO-03
No product available!
2m RS-232 D-Sub (f) / D-Sub (f) cable, uncrossed. Akyga AK-CO-04
SATA III to USB 3.0 adapter. It allows you to connect a 2.5" HDD, 3.5" HDD or SSD to a computer via USB. The angle joint facilitates assembly
SATA III to USB 3.0 adapter. It allows you to connect a 2.5" HDD, 3.5" HDD or SSD to a computer via USB. Comes with a 12 V power supply
10 cm long cable with plug and XT60 socket. It allows you to connect a battery with an XT60 socket, e.g. to a charger
15 cm long cable with plug and XT60 socket. It allows you to connect a battery with an XT60 socket, e.g. to a charger
Flexible adapter for microSD to SD card with a length of 50 cm. Supports all capacities and card types, including: 16 GB, 32 GB, 64 GB, 128 GB Micro SD/SDHC
NPN to PNP signal converter. Equipped with overvoltage protection and overcurrent protection. DFRobot FIT0850
Cable dedicated to MyoWare 2.0 muscle tension sensors. It allows you to connect the electrode with the plate in the event that it must be located at a distance from the sensor. SparkFun CAB-19244
B6 charger cable with all the most popular connectors used in batteries
Cables dedicated to MyoWare 2.0 muscle tension sensors. It allows you to connect the electrode with the plate in the event that it must be located at a distance from the sensor. SparkFun KIT-19627
No product available!
Tamiya Plug with 10cm Leads, Female