 
        
           
        
          Camera module with IMX219 sensor with a resolution of 8 MPx designed for Raspberry Pi Compute Module (CM3, CM3+, CM4) and NVIDIA Jetson Nano and NVIDIA Jetson Xavier. It is equipped with a lens with an M12 mount with a viewing angle of 75°. The camera allows you to record movies with a resolution of 1080p/60fps, 720p/180fps or 8MP/21fps, has an integrated IR filter and communicates via the MIPI CSI interface. The board has dimensions of 24 x 25 mm, which makes it compatible with the popular Raspberry Pi Camera Board V2 module.
Camera
Lens
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Compute Module IO Board Plus is a prototype board that allows you to connect Raspberry Pi CM3 module and CM3L module. It is equipped with numerous GPIO pins, HDMI port, USB ports, camera and display ports. Compute Module IO Board Plus
 No product available!
The Compute Module 4 IO Board is a companion board for Raspberry Pi Compute Module 4 (supplied separately). It is designed for use both as a development system for Compute Module 4 and as an embedded board integrated into end products.
 No product available!
NVIDIA development kit with the ARM Cortex A57 1.43GHz CPU system and the Maxwell graphics system consisting of 128 cores supporting CUDA technology. The module has 4GB DDR4 RAM, 16GB eMMC and an attached 32GB USB memory and 64GB microSD card. Waveshare JETSON-NANO-DEV-KIT
 No product available!
A development kit dedicated to creating modern solutions based on artificial intelligence. It consists of a Jetson Orin Nano Super 8GB module and a base board that can connect to all versions of Orin Nano and Orin NX modules. It is an ideal platform for creating prototypes of next-generation edge-AI products. NVIDIA 945-13766-0005-000
 No product available!
CS-Mount lens. Focal length 8 mm, FoV 50°, manual focus. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN038
 No product available!
Camera for Raspberry Pi Compute Module and NVIDIA Jetson Nano. It was equipped with a Sony IMX477 sensor with a resolution of 12.3 MPx and a built-in IR filter. Waveshare IMX477-160 12.3MP Camera
 No product available!
30 cm long tape, a knockout attempt for Raspberry Pi Zero series. Waveshare RPi Zero 2 W Camera Cable 30cm
Camera module with OV5647 sensor and movable IR filter. Works with all versions of the Raspberry Pi. The camera is equipped with a matrix with a resolution of 5 MPx. ArduCAM B0151
Flex Cable for Raspberry Pi Camera - 300mm / 12"
A set with two IMX477 cameras with a resolution of 12 MP and an expansion module for Raspberry Pi, which allows you to simultaneously connect two cameras to the minicomputer. ArduCAM B0265R
 No product available!
C-Mount lens. 35mm focal length, FoV 14.3° (H), 10.8° (V), manual focus and adjustable aperture. Designed to work with the Raspberry Pi HQ camera. ArduCAM LN047
Camera module 0.3 Mpx and with OV7251 sensor working with Raspberry Pi. The maximum video resolution is 640 × 480 pixels, without the IR filter. ArduCAM B0206
A set with a 64 MP camera and a 2 DOF control platform designed for Raspberry Pi minicomputers. The camera has an integrated IR filter and autofocus. The control platform is based on two digital servos that allow you to control the position of the camera in two dimensions. ArduCAM B0399B0283
 No product available!
A tape enabling the connection of a camera with a 15-pin 1 mm connector intended for Raspberry Pi to the CSI/DSI connector on the Raspberry Pi 5 computer. Waveshare Pi5-Camera-Cable-500mm
This FFC/FPC ribbon cable is designed for the Raspberry Pi Camera Module V2 and V3, offering full compatibility with ArduCAM IMX219 modules and the Nvidia Jetson platform. Its flexible, 9mm-wide design makes it ideal for installation in confined spaces, and installation requires no additional drivers. The electromagnetic shielding ensures stable and reliable signal transmission, making it an excellent solution for projects requiring precise communication between the camera and the motherboard. ArduCAM B0439
Camera module designed for RP2040 development boards. It uses the Himax HM01B0 sensor to achieve excellent performance in low light. ArduCAM B328
The ED-LENS-M12-180780-08 lens can be used with the Raspberry Pi M12 High Quality camera module and other cameras with an M12 interface. This M12 lens with a focal length of 7.8 mm provides a horizontal field of view of 50.3° on 1/1.8" sensors.
 No product available!
Camera for Raspberry Pi CM3, CM3+ and NVIDIA Jetson Nano. It was equipped with a Sony IMX477R sensor with a resolution of 12.3MPx and a built-in IR filter. Waveshare IMX477 12.3MP Camera
The control platform equipped with servos allows you to control the position of the camera in two dimensions. It has a built-in driver and light sensor. Waveshare Pan-Tilt HAT
Module with IMX462 sensor working with Raspberry Pi and Jetson Nano. It has a 2 MP matrix and a lens with a 99° angle of view. Waveshare IMX462-99 2MP Starlight Camera
 
                    Camera module with IMX219 sensor with a resolution of 8 MP designed for NVIDIA Jetson Nano / Xavier and Raspberry Pi Compute Module. ArduCAM B0342