Rechargeable NiMH Battery Pack: 6.0 V, 350 mAh, 5x1 2/3-AAA Cells, JR Connector
This is a rechargeable 6.0 V NiMH battery pack with a capacity of 350 mAh. The pack consists of five 2/3-size AAA cells in a single row and a 4" lead terminated by a “JR”-style connector.
![]() |
This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used). The connector is the same as what is found on the most servos and has a 0.1" spacing, so it fits nicely with 0.1" male headers and can plug directly into most RC receivers, servo extension cables, and servo switch harnesses, and custom cables made with JR male connectors or Futaba J male connectors. Note, however, that this style of connector is often referred to as “male” in the RC hobby industry, so please use the picture on the right to clear up any potential confusion.
Our rechargeable NiMH battery packs give you variety of options for powering your robot or electronics project. The battery packs use 1.2 V cells and are available in several capacities:
![]() |
| Cell Type | Capacity (mAh) |
|---|---|
| AA | 2200 |
| AAA | 900 |
| 2/3 AAA | 350 |
| 1/3 AAA | 200 |
The picture to the right shows the relative sizes of our NiMH battery packs. These packs are well-suited for powering small robots, and the smaller (1/3- or 2/3-AAA) battery packs make great power sources for miniature robots, such as those that might be based on our Baby Orangutan robot controller.
|
|
Battery pack color may differ from what is shown in the main product picture.
Note: The battery voltages listed in the product descriptions are based on the 1.2 V nominal voltage of the NiMH cells from which the packs are made. The actual voltage will depend on how charged the batteries are. A fully charged NiMH cell will deliver almost 1.5 V, so, for example, a “6V”, 5-cell pack can measure over 7 volts after being charged, and it can fall well below 5 volts when the pack is drained. You will need to charge these battery packs before you first use them. The iMAX-B6AC battery charger works well with these battery packs.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
18650 Li-Ion battery with a nominal voltage of 3.7V and a capacity of 3000mAh. Sony US18650VTC6
Li-Po battery with a rated voltage of 3.7 V and a capacity of 250 mAh, equipped with a PCM protection and a 2.5 JST-RCY connector. Akyga LP502030
Akyga AKY0300 battery with a voltage of 3.7 V and a capacity of 320 mAh, equipped with a PCM module and a 2-pin JST connector. Its small size and protective features make it perfect for compact electronic projects and mobile devices.
INR18650 lithium-ion battery with a nominal voltage of 3.7V and a capacity of 3200mAh, equipped with a PCM protection circuit, designed for powering electronic devices. Akyga AKY2461
No product available!
Lithium-polymer battery type LP405063 with a nominal voltage of 3.7 V and a capacity of 1400 mAh, equipped with a PCM protection circuit and a JST 2.54 2-pin connector on a 150 mm cable. Akyga AKY0535
No product available!
Rechargeable NiMH Battery Pack: 6.0 V, 900 mAh, 5x1 AAA Cells, JR Connector
No product available!
The VARTA R3 Ni-MH AAA battery with a capacity of 1000 mAh and a voltage of 1.2V is a reliable power source for everyday devices such as remote controls, clocks, and flashlights. Thanks to nickel-metal hydride (Ni-MH) technology, it features no memory effect and low self-discharge, ensuring long-lasting use without the need for frequent recharging.
Lithium-polymer battery type LP103035 with a nominal voltage of 3.7 V and a capacity of 1050 mAh, equipped with a PCM protection circuit and a JST 2.54 2-pin connector on a 150 mm cable. Akyga AKY0662
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 550mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0185
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 800mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0559
No product available!
The VARTA nickel-metal hydride (Ni-MH) AAA (R3) 800 mAh rechargeable batteries are reliable power sources, ideal for everyday devices such as remotes, clocks, and flashlights. Thanks to the "Ready to use" technology, they are pre-charged and ready to use right out of the packaging, and their low self-discharge rate ensures long-lasting energy retention.
Li-Ion 18650 battery with a nominal voltage of 3.7V and a capacity of 2600mAh. It has protection against overcharging, excessive discharge, overload and short circuit.
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 85mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0472
No product available!
INR18650 lithium-ion battery with a nominal voltage of 3.6V and a capacity of 3350mAh, designed for powering electronic devices and battery systems. Akyga AKY1382
No product available!
LP654290 lithium-polymer battery with a nominal voltage of 3.7 V and a capacity of 2600 mAh, equipped with a PCM protection circuit and a 150 mm lead terminated with a JST 2.54 2-pin connector. Akyga AKY0487
No product available!
The XTREME 12V 7Ah battery is a durable, maintenance-free AGM power source for motorcycles, UPS units, and critical backup systems
Rechargeable NiMH Battery Pack: 6.0 V, 350 mAh, 5x1 2/3-AAA Cells, JR Connector