New products
New products New products
zł9,349.00
4 weeks
zł173.58
Delivery date unknown
QTRX-HD-01A - module with 1 reflectance sensor with analog output
ID: 572602
5906623479054
zł16.16
Tax included
zł13.14 tax excl.
Module with 1 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4401
Description
Reflectance sensor consisting of 1 QTRX optocoupler with the ability to control the brightness of the infrared LEDs. The sensors on the board are high density (HD) and the distance between them is 4 mm. The module can be supplied with the voltage ranging from 2.9 V to 5.5 V and draws current up to 5 mA. The optimum distance from the sensor to the ground is 10 mm and the maximum distance is 30 mm. The module is ideally suited for detecting changes in light reflection, so it can be used for edge detection or line tracking in linefollower robots.
Features
- Sensor type: QTRX
- Number of sensors:1
- Sensor pitch: 4 mm (distance between individual sensors)
- Full brightness LED current: 3,5 mA (regardless of the supply voltage)
- Maximum module current: 5 mA
- Output signal: analog signal (0 V to VCC)
- Optimum sensing distance: 5 mm
- Maximum sensing distance: 30 mm
- Supply voltage: 2.9 ... 5.5 V
- Dimensions: 5,0 × 20,0 × 4,4 mm
- Weight: 0,25 g
572602
Data sheet
- Type of sensor
- QTRX
- Output type
- analog
- Number of sensors
- 1
- Power supply voltage
- 2,9 - 5,5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
DRV8835 Dual Motor Driver Carrier
zł23.90
24h
Available quantity: 9
Available
The versatile Romi chassis is a great starting point for your next mobile robot. This kit includes all the basic mechanical parts to get up and running, including two motors, two wheels, one ball caster, and battery contacts. The wheels and ball are white; all other plastic components are red.
zł170.97
24h
Available quantity: 2
Available
Module with the RP2040 microcontroller with two ARM Cortex-M0 + cores operating at 133 MHz, 256 kB RAM and 30 GPIO. The board also has 2 MB of external QSPI flash memory. Module can be programmed in C/C++ or microPython. Raspberry Pi Pico
zł19.31
24h
Available quantity: 223
Available
Other products in the same category (16)
Module with 8 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4448
zł78.97
24h
Available quantity: 1
Available
No product available!
Module with 13 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4353
zł120.76
24h
Available quantity: 1
Available
QTRXL-MD-01A-S reflective sensor, 1-channel, analog output, side connector, long range – Pololu 4640
The QTRXL-MD-01A-S reflective sensor with an analog output enables precise detection of lines and objects. Thanks to its extended range and high sensitivity, it is used in robotic and automation projects. The JST SH connector allows easy integration, and the wide supply voltage range enables flexible use in 3.3 V and 5 V systems.
zł16.06
24h
Available quantity: 3
Available
Module with a reflection sensor operating in the infrared band. The board is equipped with a Grove connector and communicates via a digital interface. Seeed Studio 101020174
zł26.73
24h
Available quantity: 4
Available
Module with 4 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4244
zł23.51
24h
Available quantity: 1
Available
Module with 5 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4305
zł48.31
24h
Available quantity: 1
Available
Module with 2 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4302
zł20.95
24h
Available quantity: 3
Available
Module with 6 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4206
zł34.16
24h
Available quantity: 1
Available
Module with 2 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4442
zł19.90
4 weeks
No product available!
Module with 7 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4107
zł37.23
24h
Available quantity: 1
Available
QTR-3A Reflectance Sensor Array
zł32.62
24h
Available quantity: 1
Available
Module with 13 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4253
zł71.07
24h
Available quantity: 1
Available
Reflective sensor with digital output, enabling obstacle detection, with adjustable trigger threshold using a built-in potentiometer. The module can be connected directly to a microcontroller and development kits such as Arduino, Raspberry Pi, STM32 or ESP32
zł4.42
4 weeks
No product available!
Reflectance sensor module with a single QTRX sensor and RC output, designed for detecting differences in surface reflectivity. Supply voltage 2.9–5.5V, low current consumption, version with side-entry JST-SH connector. Pololu 4340
zł16.08
24h
Available quantity: 3
Available
Module with 4 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4304
zł35.83
24h
Available quantity: 1
Available
Module with 1 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4401