QTR-MD-16A - module with 16 reflectance sensor with analog output
ID: 573769
zł83.31
Tax included
zł67.73 tax excl.
Module with 16 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4256
Description
Reflectance sensor consisting of array 16 QTR optocouplers with the ability to individually control the brightness of each of the infrared LEDs. The sensors on the board are medium density (MD) and the distance between them is 8 mm. The module can be supplied with the voltage ranging from 2.9 V to 5.5 V and draws current up to 250 mA. The optimum distance from the sensor to the ground is 5 mm and the maximum distance is 50 mm. The module is ideally suited for detecting changes in light reflection, so it can be used for edge detection or line tracking in linefollower robots.
Features
- Sensor type: QTR
- Number of sensors: 16
- Sensor pitch: 8 mm (distance between individual sensors)
- Full brightness LED current: 30 mA (regardless of the supply voltage)
- Maximum module current: 250 mA
- Output signal: analog signal (0 V to VCC)
- Optimum sensing distance: 5 mm
- Maximum sensing distance: 50 mm
- Supply voltage: 2.9 ... 5.5 V
- Dimensions: 125,0 × 16,5 × 2,5 mm
- Weight: 7,5 g
573769
Data sheet
- Type of sensor
- QRE
- Output type
- analog
- Number of sensors
- 16
- Power supply voltage
- 2,9 - 5,5 V
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Module with 31 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4331
zł269.70
24h
Available quantity: 1
Available
Contrast sensor module. It has two integrated operating modes: analog and digital. It has the ability to set the digital mode for color detection. DFRobot SEN0147
zł38.18
24h
Available quantity: 1
Available
Module with 5 balancing sensors for Balboa 32U4 balancing robot. Pololu 3577
zł29.32
24h
Available quantity: 2
Available
Module with 4 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4244
zł23.51
24h
Available quantity: 1
Available
No product available!
Module with 15 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4115
zł75.85
24h
Available quantity: 1
Available
Infrared sensor module with TCRT5000. Can be used to detect objects in close proximity or detect lines in "Line Follower" robots
zł2.16
24h
Available quantity: 16
Available
Module with 1 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4441
zł18.14
24h
Available quantity: 3
Available
This micro:bit module allows for light and object detection and line tracking, making it ideal for educational and robotic projects. Equipped with three phototransistors, it provides precise measurements, and the analog signal transmitted to the micro:bit allows for precise analysis of the surroundings. The board can be connected directly to the micro:bit or via alligator clips. Kitronik 5678
zł24.39
24h
Available quantity: 2
Available
Module with 4 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4444
zł38.04
24h
Available quantity: 1
Available
Module with 8 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4448
zł78.97
24h
Available quantity: 1
Available
Module with 11 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4311
zł136.89
24h
Available quantity: 1
Available
Module with 13 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4353
zł120.76
24h
Available quantity: 1
Available
Module with 31 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4231
zł158.93
24h
Available quantity: 1
Available
Module with 13 QTR type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 40 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4153
zł69.24
24h
Available quantity: 3
Available
Module with five reflection sensors. It has digital and analogue outputs. Thanks to the embedded EEPROM memory, it enables easy sensor calibration. Cytron Maker Line
zł46.90
4 weeks
No product available!
Module with 16 QTR type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 50 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4256