modTCRT5000

Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. Communicates via USB interface. Waveshare Thermal USB Camera

Adapter dedicated to the FLIR Lepton thermal imaging camera. It has been pre-configured to act as a plug-and-play USB camera UVC 1.0, it can also communicate via UART and I2C interface. SparkFun DEV-14670

Compact optical sensor based on the ITR9608 switch, which detects the presence of objects by interrupting a beam of light in a 5 mm gap. Thanks to high precision and compatibility with platforms such as Arduino or micro:bit, it is ideal for applications in robotics, automation and education. DFRobot DFR1129

Module with an infrared sensor AMG8833 - a measurement matrix with a resolution of 64 pixels (8x8). It offers an accuracy of 2.5°C and the ability to detect people at a distance of up to 7 m. Communication with the sensor is via the I2C interface. SparkFun SEN-14607

Small form factor IR camera capable of tracking up to four heat/IR sources, can be controlled with Arduino, AVR via I2C interface. SEN0158

intelligent gesture recognition module equipped with an IR camera module PAG7646J1, PAG7661QN (ISP) and a LED for backlighting. Recognizes and interprets hand gestures by recognizing the image recorded by an infrared camera. Seeed Studio 101991067

Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1.5°C and a viewing angle of 55x35°. Communication with the sensor takes place via the I2C interface. SparkFun SEN-14844

Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. It is dedicated to work with the Raspberry Pi minicomputer and communicates via the SPI interface. Waveshare Thermal USB Camera

A set with an adapter dedicated to the FLIR Lepton thermal imaging camera and the Lepton FS camera. It has been pre-configured to operate as a plug-and-play UVC 1.0 USB camera, it can also communicate via UART and I2C interface. SparkFun DEV-20813

Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1°C and a viewing angle of 55° x35°. Communication with the sensor takes place via the I2C interface. Pimoroni PIM365

Module with MLX90640 thermal imaging camera with a matrix of 32x24 fields and a viewing angle of 110°. The board is equipped with a STEMMA QT connector and communicates via the I2C interface. Adafruit 4469

Module with MLX90641 thermal imaging camera with a 16x12 field matrix and a viewing angle of 55°. It communicates via the I2C interface. Waveshare MLX90641-D55 Thermal Camera

A thermal imaging camera module based on the MLX90640 image sensor. It has a resolution of 32x24 pixels and a field of view of 110°. Communication is via an I2C interface. Waveshare MLX90640-D110 Thermal Camera

Module with a Panasonic sensor with an 8x8 IR thermal matrix (AMG8833 chip) with a built-in 3.3 V controller and a logic level translator. The I2C interface is used for communication. Adafruit 3538

Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1.5°C and a viewing angle of 110x75°. Communication with the sensor takes place via the I2C interface. SparkFun SEN-14843

An adapter dedicated to the FLIR Lepton thermal imaging camera. It has been preconfigured to operate as a USB plug-and-play UVC 1.0 camera, and can also communicate via UART and I2C interfaces. SparkFun DEV-20812