MLX90641-D55 thermal camera module for Raspberry Pi - Waveshare 20465
ID: 587334
5906623425952
zł246.54
Tax included
zł200.44 tax excl.
Module with MLX90641 thermal imaging camera with a 16x12 field matrix and a viewing angle of 55°. It communicates via the I2C interface. Waveshare MLX90641-D55 Thermal Camera
Description
Module with MLX90641 thermal imaging camera with a 16x12 field matrix and a viewing angle of 55°. It enables temperature measurement in the range from -40°C to 300°C with high accuracy up to 2°C. The infrared thermal imager is equipped with a sensitive heat sensor that can detect slight differences in the temperature of objects in the environment. It then collects this radiation information from the objects and creates an electronic image based on the temperature difference information. The module communicates via the I2C interface and is supplied with the voltage of 3.3 V or 5 V. Full documentation with examples of use is available on the product Wiki page.
Attention!
To operate the module, a chip with at least 20 KB of RAM is required.Features
- Sensor: MLX90641
- Resolution: 16x12
- FoV: 55 °
- Temperature measurement range: -40 ? to 300 ?
- Refresh rate: 0.5Hz to 64Hz
- I2C interface (address 0x33)
- Supply voltage: 3.3 V or 5 V
- Current consumption: 12 mA
- Dimensions: 28 x 16 mm
- Mounting holes 2 mm
Kit contains
- MLX90641-D55 Thermal Camera module
- JST PH2.0 4-pin cable
587334
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Module with a MLX90641 thermal imaging camera with a 16x12 field matrix and a 110° viewing angle. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020892
zł547.69
24h
Available quantity: 1
Available
Module with a MLX90640 thermal imaging camera with a 32x24 field matrix and a 110° viewing angle. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020142
zł786.54
Delivery date unknown
No product available!
Module with a MLX90640 thermal imaging camera with a 32x24 field matrix and a 55° viewing angle. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 114020141
zł887.62
Delivery date unknown
No product available!
Other products in the same category (16)
An adapter dedicated to the FLIR Lepton thermal imaging camera. It has been preconfigured to operate as a USB plug-and-play UVC 1.0 camera, and can also communicate via UART and I2C interfaces. SparkFun DEV-20812
zł864.58
3 weeks
No product available!
Lepton 2.5 thermal imaging camera module with an adapter. It allows you to connect the camera to popular development boards, e.g. Arduino or Raspberry Pi. SparkFun KIT-15948
zł2,100.70
3 weeks
No product available!
Module with an infrared sensor AMG8833 (matrix 8x8) designed to measure temperature. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020557
zł238.31
4 weeks
No product available!
Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. Communicates via USB interface. Waveshare Thermal USB Camera
zł600.46
24h
Available quantity: 1
Available
Module with an infrared sensor AMG8833 - a measurement matrix with a resolution of 64 pixels (8x8). It offers an accuracy of 2.5°C and the ability to detect people at a distance of up to 7 m. Communication with the sensor is via the I2C interface. SparkFun SEN-14607
zł274.11
24h
Available quantity: 1
Available
Adapter dedicated to the FLIR Lepton thermal imaging camera. It has been pre-configured to act as a plug-and-play USB camera UVC 1.0, it can also communicate via UART and I2C interface. SparkFun DEV-14670
zł866.35
3 weeks
No product available!
Small form factor IR camera capable of tracking up to four heat/IR sources, can be controlled with Arduino, AVR via I2C interface. SEN0158
zł169.97
24h
Available quantity: 3
Available
Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1°C and a viewing angle of 55° x35°. Communication with the sensor takes place via the I2C interface. Pimoroni PIM365
zł415.99
24h
Available quantity: 6
Available
Lepton 3.5 thermal imaging camera module with PureThermal Mini Pro adapter. It allows you to connect the camera via the USB UVC interface, e.g. to a computer. SparkFun DEV-17544
zł2,271.60
24h
Available quantity: 1
Available
LWIR thermal imaging camera module equipped with a matrix with a resolution of 80x60 pixels with progressive scanning. It offers a viewing angle of 63.5° (diagonal) and 50° (horizontal) and can download data with a frequency of up to 8.6 Hz via the SPI interface. SparkFun SEN-16465
zł1,461.47
3 weeks
No product available!
Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. It is dedicated to work with the Raspberry Pi minicomputer and communicates via the SPI interface. Waveshare Thermal USB Camera
zł357.75
24h
Available quantity: 2
Available
Infrared speed sensor module for counting the speed of motor, LM393, RoHS
zł2.71
24h
Available quantity: 7
Available
Waveshare Photo Interrupter Sensor is an IR optical sensor module with Schmitt trigger and a signaling diode allowing the construction of an incremental encoder. Waveshare Photo Interrupter Sensor
zł12.61
24h
Available quantity: 8
Available
A set with an adapter dedicated to the FLIR Lepton thermal imaging camera and the Lepton FS camera. It has been pre-configured to operate as a plug-and-play UVC 1.0 USB camera, it can also communicate via UART and I2C interface. SparkFun DEV-20813
zł1,579.00
3 weeks
No product available!
intelligent gesture recognition module equipped with an IR camera module PAG7646J1, PAG7661QN (ISP) and a LED for backlighting. Recognizes and interprets hand gestures by recognizing the image recorded by an infrared camera. Seeed Studio 101991067
zł110.09
24h
Available quantity: 2
Available
Module with a Panasonic sensor with an 8x8 IR thermal matrix (AMG8833 chip) with a built-in 3.3 V controller and a logic level translator. The I2C interface is used for communication. Adafruit 3538
zł228.87
24h
Available quantity: 2
Available
Module with MLX90641 thermal imaging camera with a 16x12 field matrix and a viewing angle of 55°. It communicates via the I2C interface. Waveshare MLX90641-D55 Thermal Camera