FLIR Radiometric Lepton Dev Kit V2 - Lepton 2.5 thermal imaging camera module with an adapter
ID: 1178538
zł2,100.70
Tax included
zł1,707.89 tax excl.
Lepton 2.5 thermal imaging camera module with an adapter. It allows you to connect the camera to popular development boards, e.g. Arduino or Raspberry Pi. SparkFun KIT-15948
Free shipping
free shipping in Poland for all orders over 500 PLN
Same day shipping
If your payment will be credited to our account by 11:00
14 days for return
Each consumer can return the purchased goods within 14 days
Description
Lepton 2.5 thermal camera module with FLIR Lepton® Breakout Board v2.0 adapter. It allows you to connect the camera to popular development boards, e.g. Arduino or Raspberry Pi, or to create a prototype using a universal board.
LWIR module equipped with a matrix with a resolution of 80x60 pixels with progressive scanning. It offers a viewing angle of 60° (diagonal) and 50° (horizontal) and can download data at a frequency of up to 8.6 Hz. The camera is calibrated and allows you to obtain accurate information about the temperature on the surface of objects in a non-contact way. Due to its small size, the camera can be easily integrated with mobile devices as an infrared sensor. For communication, the module uses the SPI interface (image transmission) and I2C (configuration). Full documentation with examples of use is available on the product page.
Features
- Effective frames per second: 9 Hz
- Input clock: 25 MHz nominal, IO CMOS voltage levels
- Output Format: User selectable 14-bit, 8-bit (using AGC), or 24-bit RGB (using AGC and Colorization)
- Pixel size: 17 µm
- Radiometric accuracy: +/- 5 ° C or 5% (High Gain), +/- 10 ° C or 10% (Low Gain)
- Spectral range: infrared, 8 µm to 14 µm
- Temperature compensation
- Thermal sensitivity: <50 mK (0.050 ° C)
- Video data interface: SPI
- Control interface: CCI (similar to I2C), IO CMOS voltage levels
- Optimum temperature range: -10 ° C to + 80 ° C
- Shock: 1500G @ 0.4ms
- Format: 80 × 60, progressive scan
- FOV: 60 ° (D), 50 ° (H)
- Image optimization: factory set and fully automatic
- Non-uniformity correction (NUC): automatic with snapshot
- Sensor technology: VOx microbolometer
- Supply voltage: 3 V to 5.5 V
- Power consumption: 150 mW (in operation), 650 mW (during shutter), 4 mW (standby)
Kit contains
- FLIR Lepton® 2.5 Thermal Imaging Module
- FLIR Lepton® Breakout Board v2.0
1178538
You might also like
Adapter dedicated to the FLIR Lepton thermal imaging camera. It has been pre-configured to act as a plug-and-play USB camera UVC 1.0, it can also communicate via UART and I2C interface. SparkFun DEV-14670
zł866.35
Delivery date unknown
No product available!
Lepton 3.5 thermal imaging camera module with PureThermal Mini Pro adapter. It allows you to connect the camera via the USB UVC interface, e.g. to a computer. SparkFun DEV-17544
zł2,182.20
24h
Available quantity: 1
Available
LWIR thermal imaging camera module equipped with a matrix with a resolution of 80x60 pixels with progressive scanning. It offers a viewing angle of 63.5° (diagonal) and 50° (horizontal) and can download data with a frequency of up to 8.6 Hz via the SPI interface. SparkFun SEN-16465
zł1,461.47
Delivery date unknown
No product available!
Other products in the same category (16)
Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. It is dedicated to work with the Raspberry Pi minicomputer and communicates via the SPI interface. Waveshare Thermal USB Camera
zł599.55
24h
Available quantity: 1
Available
Small form factor IR camera capable of tracking up to four heat/IR sources, can be controlled with Arduino, AVR via I2C interface. SEN0158
zł169.97
24h
Available quantity: 4
Available
A set with an adapter dedicated to the FLIR Lepton thermal imaging camera and the Lepton FS camera. It has been pre-configured to operate as a plug-and-play UVC 1.0 USB camera, it can also communicate via UART and I2C interface. SparkFun DEV-20813
zł1,579.00
6 weeks
No product available!
An adapter dedicated to the FLIR Lepton thermal imaging camera. It has been preconfigured to operate as a USB plug-and-play UVC 1.0 camera, and can also communicate via UART and I2C interfaces. SparkFun DEV-20812
zł864.58
6 weeks
No product available!
Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1°C and a viewing angle of 110°x75°. Communication with the sensor takes place via the I2C interface. Pimoroni PIM366
zł441.95
24h
Available quantity: 1
Available
Module with an infrared sensor AMG8833 - a measurement matrix with a resolution of 64 pixels (8x8). It offers an accuracy of 2.5°C and the ability to detect people at a distance of up to 7 m. Communication with the sensor is via the I2C interface. SparkFun SEN-14607
zł274.11
24h
Available quantity: 1
Available
Module with an infrared sensor AMG8833 (matrix 8x8) designed to measure temperature. The board is equipped with a Grove connector and communicates via the I2C interface. Seeed Studio 101020557
zł250.44
24h
Available quantity: 1
Available
Infrared speed sensor module for counting the speed of motor, LM393, RoHS
zł9.50
6 weeks
No product available!
Module with a Panasonic sensor with an 8x8 IR thermal matrix (AMG8833 chip) with a built-in 3.3 V controller and a logic level translator. The I2C interface is used for communication. Adafruit 3538
zł254.57
24h
Available quantity: 2
Available
Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1.5°C and a viewing angle of 110x75°. Communication with the sensor takes place via the I2C interface. SparkFun SEN-14843
zł393.59
4 weeks
No product available!
Adapter dedicated to the FLIR Lepton thermal imaging camera. It has been pre-configured to act as a plug-and-play USB camera UVC 1.0, it can also communicate via UART and I2C interface. SparkFun DEV-14670
zł866.35
4 weeks
No product available!
Module with a thermal imaging camera based on the MLX90640-D55 image sensor. The camera has a resolution of 32x24 pixels and a field of view of 55°. Communication with the module is via the I2C interface. Waveshare MLX90640-D55 Thermal Camera
zł372.43
24h
Available quantity: 2
Available
Module with an infrared sensor MLX90640 - a measuring matrix with a resolution of 32x24 pixels. It offers an accuracy of 1.5°C and a viewing angle of 55x35°. Communication with the sensor takes place via the I2C interface. SparkFun SEN-14844
zł504.44
4 weeks
No product available!
LWIR thermal imaging camera module equipped with a matrix with a resolution of 80x60 pixels with progressive scanning. It offers a viewing angle of 63.5° (diagonal) and 50° (horizontal) and can download data with a frequency of up to 8.6 Hz via the SPI interface. SparkFun SEN-16465
zł1,461.47
4 weeks
No product available!
Available
Module with a thermal imaging camera with an 80x42 field matrix and a 45° viewing angle. Communicates via USB interface. Waveshare Thermal USB Camera
zł600.46
24h
Available quantity: 2
Available
Lepton 2.5 thermal imaging camera module with an adapter. It allows you to connect the camera to popular development boards, e.g. Arduino or Raspberry Pi. SparkFun KIT-15948