TS-B2 - Soldering tip for Mini TS100

External enclosure designed to protect, transfer and store data on M.2 SSD drives with NVMe or SATA interface. Unitek S1204B

Module with e-Paper display with a diagonal of 2.13" and a resolution of 250x122 px with WiFi communication and Bluetooth 4.2. Waveshare 2.13inch e-Paper Cloud Module

LoRa module based on ESP32-WROOM-32E with WiFi and Bluetooth communication and LoRa RFM95W modem. There are ESP32 pins and a Qwiic connector on the board. SparkFun WRL-18074

A module with a MEMS microphone and an amplifier that will allow you to detect a voice, a clap or a door slam. The board has an analog output. SparkFun BOB-18011

The 74LVC1G07GV is a compact, energy-efficient single-channel logic buffer with an open-drain output, designed for digital systems operating within a voltage range of 1.65 V to 5.5 V. It offers fast switching, high drive capability, and stable performance in applications such as LED control, data lines, and interfaces with mixed logic level standards.

100-pin connector (socket) for Raspberry Pi CM4 modules. 0.4 mm pitch, 1.45 mm height

Base board for the SpaceSOM-8Mplus family of modules. Creates a complete development platform similar to the SBC. SoMLabs SpaceCB-8Mplus-ADV v.1.1

50 W soldering iron for Bakon BK950D station. Works with soldering tips from the T13 series

T13 soldering tip with a K-type cut tip designed for the Bakon BK950D station

Black metal casing for Raspberry Pi 4 model B minicomputers. Equipped with active cooling ICE Tower Low Profile

HAT expansion module with SATA interface designed for Raspberry Pi 4 model B. It allows you to connect to a minicomputer mass storage in the form of 2.5" HDDs and SSDs with SATA interface

HAT type power supply module with cooling fan designed for Raspberry Pi 4 model B. Provides flexible power supply to the minicomputer via DC 5.5x2.5 mm connector, XH2.54 mm connector, microUSB or USB type C connector

Wall charger with USB and USB type C sockets. Supports QC3.0 + PD3.0 fast charging protocol with a maximum current of up to 3 A. USAMS US-CC085

A spatula for removing prints from the 3D printer table. Made of stainless steel, it is durable and handy

A needle with a diameter of 0.4 mm, designed for cleaning the nozzle in 3D printers. It allows you to get rid of the remnants of the material after printing and to remove the filament in case of clogged nozzle

Connector for connecting the 22-pin tape with 0.5 mm pitch to the printed circuit board. F0500WR-S-22PB