- Out-of-Stock
FeatherS3 - WiFi and BLE module with ESP32-S3
ID: 1179384
5906623431137
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5399
Description
Module with WiFi Espressif ESP32-S3. It has 16 MB Flash memory, 8 MB SRAM memory, integrated WiFi 802.11 b/g/n and BLE transceiver and a JST-PH 2.0 connector for connecting a LiPo battery. There is an RGB diode on the board. The ESP32-S3 Feather is easy to integrate with sensors due to the available STEMMA QT connector (Qwiic compatible). The user has two 3.3 V stabilizer with a capacity of up to 700 mA, thanks to which you can power external systems. The board is powered by a USB type C connector.
The module offers great possibilities in the field of IoT systems and can be used both to control LEDs and to transfer data to a specific platform. It can also be programmed using the Arduino IDE, ESP-IDF or CircuitPython.
Features
- Xtensa LX7, 240MHz, RISC-V 32-bit dual-core processor
- 16 MB SPI Flash Memory
- 8 MB of SRAM
- Wi-Fi 2.4 GHz - 802.11b/g/n
- BLE 5 + Mesh
- 2 x LDO stabilizer 700mA 3.3V
- USB-C connector with reverse current protection
- Native USB port + JTAG USB serial port
- LiPo battery charging
- Low power RGB LED
- VBAT pins and 5 V Sense
- High-gain 3D antenna
- 2 x STEMMA connectors, 1 on LDO1 and 1 on LDO2
- 21 x GPIO
- Dimensions: 52.3 x 22.9 mm
Kit contains
- FeatherS3
- Goldpin connectors
1179384
Data sheet
- Microcontroller
- ESP32-S3
- Flash memory
- 16 MB
- Number of I/O
- 21
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- Yes
- MicroSD slot
- No
- Length
- 52,3 mm
- Width
- 22,9 mm
- USB connector type
- USB type C
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB typ A and USB typ C connectors, cable length 0.5 m. LANBERG
zł4.26
24h
Available quantity: 18
Available
Cable with USB typ A and USB typ C connectors, cable length 1 m. LANBERG CA-USBO-10CC-0010-BK
zł5.71
24h
Available quantity: 5
Available
Cable with USB typ A and USB typ C connectors, cable length 1,8 m. LANBERG CA-USBO-10CC-0018-BK
zł5.61
24h
Available quantity: 25
Available
A set of 40 pieces of female-female connecting cables in various colors, 10 cm long
zł4.35
Delivery date unknown
No product available!
A set of 40 pcs of male-female connecting cables in various colors, 10 cm long
zł4.31
24h
Available quantity: 276
Available
4-wire cable with a length of 50 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4399
zł5.83
Delivery date unknown
No product available!
4-core cable with a length of 200 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 4401
zł7.50
Delivery date unknown
No product available!
4-core cable with a length of 300 mm. Both ends with STEMMA QT (Qwiic) plug. Adafruit 5384
zł9.90
24h
Available quantity: 6
Available
Other products in the same category (16)
Assembled thermostat with LED display. AVT3220 C
Retired
No product available!
A circuit board for the (half) home automation system - a four-channel ON / OFF module. AVT3212 A
Retired
No product available!
AVT kit for self-assembly of the (half) home automation system - four-channel ON / OFF module. AVT3212 B
Retired
No product available!
Assembled system (half) of home automation - four-channel ON / OFF module. AVT3212 C
Retired
No product available!
The PCF8574 IO expansion board is an 8-bit I / O expander controlled by the I2C interface. Up to 8 PCF8574 IO expansion cards can be connected to the I2C bus, providing up to 64 I / O ports. Waveshare 3708
Retired
No product available!
MYIR MYS-7Z0007S-C is a single board module based on the Xilinx XC7Z007S-1CLG400C chip (Zynq-7007S). This system consists of a single-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz and Artix-7 FPGA. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
Retired
No product available!
MYIR MYIR MYS-7Z010-LC is a set of elements with a single board computer based on the Xilinx XC7Z010-1CLG400C (Zynq-7010) system. This system consists of a dual-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
Retired
No product available!
MYIR Z-turn Lite MYS-7Z010-LCS is a single board module based on the Xilinx XC7Z010-1CLG400C (Zynq-7010) chipset. This system consists of a dual-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
Retired
No product available!
Z-turn IO Cape extension board is an extension board for Z-turn series tiles based on Xilinx Zynq
Retired
No product available!
No product available!
OLED display 128x64 pixels, 0.96 ", 3V power supply, SSD1306 controller, communication via I2C and SPI interfaces, PARALLEL WHITE display color, working temperature from -40 to +70, ext. CAP
Retired
No product available!
ODROID-HC2 is a mini PC with Samsung Exynos5422 Cortex-A15 2Ghz and Cortex-A7 Octa core CPUs
Retired
No product available!
No product available!
The module contains an input for SD cards and MicroSD cards. Waveshare SD Storage Board
Retired
No product available!
264x176, 2.7inch E-Ink display HAT for Raspberry Pi, three-color, SPI interface
Retired
No product available!
Waveshare AlphaBot, a basic set for building an Arduino-based robot
Retired
No product available!
Module with WiFi and BLE Espressif ESP32-S3. It integrates a LiPo charging circuit and an RGB diode. It is equipped with a STEMMA QT connector. Adafruit 5399