- Out-of-Stock
Patchcord - Ethernet network cable 15m cat.5E UTP, white, Lanberg
ID: 1181846
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCF5-10CC-1500-W
Description
Ethernet FTP category 5E network cable, which enables data transfer at a maximum speed of 2.5 Gbps. The maximum operating frequency is 100 MHz. It is designed for connections at distribution points and connections of the subscriber socket with active devices such as a switch, router or directly with the computer's network card. It is used in the connection of passive and active devices in LAN, Ethernet, xDSL, telephone networks - at home, in the office and in industry. Manufactured in accordance with applicable standards, subjected to multiple tests and verifications, they ensure the highest transmission parameters and compliance with a given category.
Features
- Cable length: 1500 cm
- ICT category: Cat. 5/5e
- Shielding type: F/UTP
- Colour: White
- AWG: 26
- Angle connector: No
- HDPE isolation: 0.88 mm
- External lagging: 5.4 mm
- Maximum operating frequency: 100 MHz
- Material: Copper plated (CCA)
1181846
Data sheet
- Cable category
- 5e
- Ekranowany?
- F/UTP
- Cable length (m)
- 15 m
Manufacturer IMPAKT SPÓŁKA AKCYJNA Stanisława Lema 16 62-050 Mosina Poland zgody@impakt.com.pl
Responsible person IMPAKT SPÓŁKA AKCYJNA Stanisława Lema 16 62-050 Mosina Poland formularz kontaktowy na stronie osoby odpowiedzialnej
Other products in the same category (16)
The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell
Retired
No product available!
The Cloudshell for XU4 is an affordable DIY Network Attached Storage (NAS) Solution to create your own personal cloud! It includes a color LCD console display on the front and has room for a 2.5inch HDD/SSD along with the XU4 board inside the CloudShell
Retired
No product available!
Cooling Fan X is a cooling fan that can be used to cool any processor that works under heavy load. It can be mounted on the heat sink housing with 4 screws
Retired
No product available!
Photon Wearable Shield makes it easy to add the WiFi enabled Photon to any wearables project. Each pin on the Photon is broken out into large sewing pins. Use conductive thread to make your next wearables projects. DEV-13328
Retired
No product available!
The cable allows connecting the ATMEL-ICE programmer to the commissioning set with any connector (operated by the programmer), through individual pin connectors
Retired
No product available!
1-channel monochrome system of adding subtitles on the image (OSD - On-Screen Display) with integrated EEPROM, TSSOP28, Maxim memory
Retired
No product available!
No product available!
The controller can control two brush motors, communicating with the master system using USB Micro-B, TTL serial interface, analog signals, as well as signals from the RC apparatus. The current capacity of 5A / channel allows you to control high-power motors. Polol 2394
Retired
No product available!
EEPROM CAT93C86LI-G memory; 16kbit; 2K x 8bit; access time: 150ns; Power supply: 1.8 ... 5.5 V; 8-Pin PDIP
Retired
No product available!
Nettemp Pi Hat is a module that allows to connect eight trees of sensors with I2C/1-Wire interface and control of four relays outputs. Thanks to the extension board is possible to build in an easy way e.g. a multipunkt temperature controller.
Retired
No product available!
32GB microSDHC Memory Card with SD Adapter, class 10 A1, Kingston
Retired
No product available!
WiFi 802.11 b / g / n module with ESP8266 system, 5 leads are available with 2 mm pitch with the possibility of soldering of gold pins, power lines, reset line and UART interface have been led to the connector. 3.3V power supply
Retired
No product available!
WiFi 802.11 b / g / n module with ESP8266 system, 8 pins with 2.54 mm pitch are available with soldered gold pins, 3 GPIO lines, reset, power supply and UART interface on the connector. U.FL. Antenna Connector 3.3 V power supply
Retired
No product available!
nRF51 DK is a development board based on the nRF51422 system with Bluetooth Low Energy (BLE) and 2.4 GHz connectivity. The module has a connector compatible with Arduino shields, buttons and diodes available to the user.
Retired
No product available!
No product available!
No product available!
Unshielded UTP category 5E Ethernet network cable with RJ45 plugs. Lanberg PCF5-10CC-1500-W