- Out-of-Stock
ROSA3D ReFill PLA Starter Filament 1.75mm White
ID: 1183012
5907753132451
Filament from ROSA3D made of high-quality PLA pellets. Placed on a cardboard thimble, on which 1 kg of 1.75 mm diameter filament is wound. ROSA3D ReFill PLA Starter Winter White
Description
1.75 mm PLA filament for 3D printing by ROSA3D. 1 kg of filament is wound on the spool. The recommended printing temperature is in the range from 185°C to 225°C, and the bed temperature during printing in the range of 40°C - 60°C, however, when using adhesives, heating the bed is not necessary.
The filament was placed on a cardboard coil manufactured using only certified bio-friendly eco-friendly adhesives. The shape of the coil is stable and guarantees satisfaction. In order to use the filament, it is necessary to print two reusable discs, which must be pressed into the refill thimble.
Rosa3D is a Polish manufacturer of filaments intended for both hobby and industrial printing. Thanks to many years of experience and modern machinery, the company is able to provide good quality and accuracy of the diameter and roundness of the filament. Filament PLA Starter from Rosa3D was designed for beginner users of 3D printers. The simplicity of PLA Starter printing will allow you to enjoy aesthetic prints, and over time will convince you to print more and more complex and demanding projects.
PLA is the basic material used in 3D printing. PLA Starter is characterized by low shrinkage and no unpleasant odor. The prints are characterized by excellent layer adhesion and very good detail reproduction. The filament is made of a biodegradable biopolymer. It was made of ingredients approved for contact with food.
Features
- Color: white
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +/- 0.02 mm
- Printing temperature: 185°C to 225°C
- Bed temperature: 40°C to 60°C (when using washers or other means to increase the adhesion heating of the table is not required)
- Density 1.24 g/cm3
- Odorless smell
- Elongation at tensile 6%
- Tensile strength (to break) 53 MPa
- Modulus of elasticity at tensile 3500 MPa
- Heat deformation temperature 55°C
- Net weight: 1 kg
1183012
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 1 kg
- Diameter
- 1,75 mm
- Colour
- White
Other products in the same category (16)
No product available!
The module with the TXB0108 system enables the connection of systems operating with different voltage levels. It has 8-channels and is 2-way. The transmission direction of each channel is detected automatically. MOD-38.Z
Retired
No product available!
No product available!
The STM32 eXploreM0 module contains a 32-bit microcontroller with ARM Cortex M0 core, STM32F051C8T6 (64 kB Flash memory, 8 kB RAM, 48 MHz, HDMI-CEC, I2C, IrDA, LIN, SPI, UART / USART). The USB / UART converter allows programming of the microcontroller via a USB cable. MOD-40.Z
Retired
No product available!
The STM32 eXploreM0 + module contains a 32-bit microcontroller with ARM Cortex M0 + core, STM32L051C8T6 (64 kB of Flash memory, 8 kB RAM, 32 MHz, I2C, IrDA, SPI, UART / USART). The built-in USB / UART converter enables programming of the microcontroller via a USB cable. MOD-41.Z
Retired
No product available!
No product available!
The RGB LED ruler has 8 programmable LEDs WS2812B with a built-in control system. It is possible to set a specific color for each diode. The module has an IN input for controlling and an OUT output to which further light points or other modules from WS2812B can be connected. The supply voltage is from 3.5 to 5.3 V, and the input voltage +/- 0.5 V of the supply voltage
Retired
No product available!
No product available!
No product available!
Real-time clock with PCF8563 chip and battery backup. Modally MOD-48.Z
Retired
No product available!
V4 features the same sensors as v3 (L3GD20H, LSM303D) and adds an LPS25H digital barometer. An I²C interface accesses 10 independent measurements that can be used to calculate the sensor’s altitude and absolute orientation.
Retired
No product available!
Ultralow Power Boost Regulator with MPPT and Charge Management, LFCSP16, Analog Devices Inc., RoHS
Retired
No product available!
Integrated circuit - Low Power Programmable Temperature Controller, 8-SOIC, Analog Devices, RoHS
Retired
No product available!
Integrated circuit - Four White LED Backlight Driver, LFCSP 16 VQ housing, Analog Devices, RoHs
Retired
No product available!
Integrated circuit - Charge Pump Driver for LCD White LED Backlights, 16-VFQFN Exposed Pad, CSP, Analog devices, RoHS
Retired
No product available!
4-channel white LED driver based on the Boost converter; 2.8 ... 18V; 100mA; 12 LFCSP; Analog Devices; Compliance
Retired
No product available!
Filament from ROSA3D made of high-quality PLA pellets. Placed on a cardboard thimble, on which 1 kg of 1.75 mm diameter filament is wound. ROSA3D ReFill PLA Starter Winter White