.png)
- Out-of-Stock
BLtouch V3.1 - sensor for automatic table leveling in 3D printers
ID: 1185560
5906623432264
BLTouch is an automatic table leveling sensor for 3D printers with a built-in semiconductor Hall sensor. It can precisely measure the inclination of a surface and is suitable for leveling a table made of any material, including: glass or metal. Antclabs BLtouch V3.1
Description
BLTouch is an automatic table leveling sensor for 3D printers with a built-in semiconductor Hall sensor. It can precisely measure the inclination of a surface and is suitable for leveling a table made of any material, including: glass or metal.
The sensor is characterized by a simple structure and high precision thanks to the innovative use of an electromagnet and a detector. It aims to ensure user convenience and pleasant printing by adding many intelligent functions such as self-test, alarm, alarm release and touch switch mode, blue LED for servo signal and Z (Zmin) probe testing. The sensor ensures high precision because the standard deviation of repeatability is approximately 0.005 mm.
BLTouch can be easily used in various types of 3D printers because it has a small and simple structure. It works like a regular automatic workbench leveling sensor, so firmware configuration is easy and intuitive. The implemented alarm function means that the sensor will signal with an LED indicator if a problem is detected during self-test or operation. The 3D printer can read the BLTouch alarm signal, and according to the alarm status, it can stop and pause the 3D printer with the G code set, and also support BLTouch release, storage, etc. Additionally, blue and red LED indicate the wire damage.
Features
- Z probe output: open drain (default) or 5V logic
- Cable length: 150±5 mm
- Output description:
- 3-pin: brown (GND), red (+5V), orange (control signal)
- 2-pin: black (GND), white (Zmin)
- Housing material: polycarbonate (PC)
- Supply voltage: 4.8 to 5.1 V
- Current consumption: 15 mA
Kit contains
- BLTouch V3.1
- 2 x screw, nut and washer
- 2 x springs for mounting BLTouch
- 2 x Dupont 3Pin Housing
- 2 x Dupont 2Pin Housing
- 2 x Dupont 1Pin Housing
- 10 x Dupont Connector (Male and Female)
- 1 X Jumper
1185560
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
No product available!
The MyoWare Muscle Sensor measures, filters, rectifies, and amplifies the electrical activity of a muscle and produces an analog output signal that can easily be read by a microcontroller, enabling novel, muscle-controlled interfaces for your projects.
Retired
No product available!
This gearmotor is a powerful 12V brushed DC motor with a 30:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 1920 counts per revolution of the gearbox’s output shaft. These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.
Retired
No product available!
This gearmotor is a powerful 12V brushed DC motor with a 70:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 4480 counts per revolution of the gearbox’s output shaft. These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder.
Retired
No product available!
This gearmotor is a powerful 12V brushed DC motor with a 102.083:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 6533 counts per revolution of the gearbox’s output shaft.
Retired
No product available!
This gearmotor is a powerful 12V brushed DC motor with a 131.25:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft.
Retired
No product available!
This is the motor and encoder portion of our 37D mm metal gearmotors with 64 CPR encoders.
Retired
No product available!
High-power (HP), 12V 25D mm metal gearmotors with 48 CPR encoders. It does not include a gearbox, but the pinion gear on the output shaft works with all of our 25D mm gearmotor gearboxes, so this can be used as a replacement motor or encoder for those gearboxes. Pololu 3212
Retired
No product available!
High-power, 12 V brushed DC motor combined with a 20.4:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 979.62 counts per revolution of the gearbox’s output shaft. Pololu 3215
Delivery date unknown
No product available!
Pololu motor with 48 CPR encoder, 99: 1 gear, standard 12 V operating voltage and 76 rpm. Polol 3243
Retired
No product available!
Low-power (LP), 12V 25D mm metal gearmotors with 48 CPR encoders. It does not include a gearbox, but the pinion gear on the output shaft works with all of our 25D mm gearmotor gearboxes, so this can be used as a replacement motor or encoder for those gearboxes. Pololu 3260
Retired
No product available!
Low-power, 12 V brushed DC motor combined with a 171.79:1 metal spur gearbox with integrated 48 CPR quadrature encoder on the motor shaft, which provides 8245.92 counts per revolution of the gearbox’s output shaft. Pololu 3268
Retired
No product available!
Inertial measurement unit (IMU) and altimeter that features the same LSM6DS33 gyro and accelerometer and LIS3MDL magnetometer as the MinIMU-9 v5, and adds an LPS25H digital barometer. Pololu 2739
Retired
No product available!
ZigBee module, features the CC2530F256 onboard, XBee compatible interface
Retired
No product available!
This breakout board, based on the best-of-class Si4713, is an all-in-one stereo audio FM transmitter that can also transmit RDS/RBDS data. Adafruit 1958
Retired
No product available!
The TRACER DeLuxe USB keyboard is a classic keyboard, but very carefully made. The high quality of the material used for production goes hand in hand with the interesting design of this keyboard. 1.2 m cable with USB terminal
Retired
No product available!
BLTouch is an automatic table leveling sensor for 3D printers with a built-in semiconductor Hall sensor. It can precisely measure the inclination of a surface and is suitable for leveling a table made of any material, including: glass or metal. Antclabs BLtouch V3.1