.png)
- Out-of-Stock
Two-channel 30MHz DDS signal generator
ID: 1186028
5906623452125
The two-channel DDS signal generator with a range of up to 30MHz offers precise signal generation with DDS technology and a resolution of up to 0.01uHz. The device has 12-bit vertical resolution, 1mV amplitude resolution and an output impedance of 50Ω. Junctek JDS6600-30
Description
The two-channel DDS signal generator with a frequency range of up to 30MHz is a modern and precise tool intended for professionals in the field of electronics. Thanks to DDS technology, the device ensures excellent stability and precision of signal generation. The generator supports sine waves up to 30MHz, while square and triangle waves reach up to 15MHz. Pulse and arbitrary waves have a range of up to 6MHz. The rise time of a square wave is 25 nS. The excellent precision of the device is emphasized by a minimum frequency resolution of 0.01uHz and an accuracy of 20ppm. The frequency stability of the generator reaches 1ppm/3h. Additionally, the device offers a wavelength of 2048 points, a vertical waveform resolution of 12-bit and an amplitude resolution of 1mV. All these features are delivered via a 50Ω output, guaranteeing excellent compatibility with measurement systems.
Features
- Sine wave frequency range: 0 - 30MHz
- Square wave frequency range: 0 - 15MHz
- Triangular wave frequency range: 0 - 15MHz
- Pulse wave frequency range: 0 - 6MHz
- Arbitrary wave frequency range: 0 - 6MHz
- Square wave rise time: 25nS
- Minimum frequency resolution: 0.01uHz
- Frequency accuracy: 20ppm
- Frequency stability: 1ppm/3h
- Wavelength: 2048 points
- Vertical waveform resolution: 12-bits
- Amplitude resolution: 1mV
- Output impedance: 50Ω
Included
- Two-channel generator
- BNC cable - crocodile clips - 2 pcs.
- BNC-BNC cable
- USB cable
- Power supply
1186028
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
HAT MCC 152 module for Raspberry Pi. It provides 2 analog outputs with a resolution of 12 bits and a range of 0-5 V and 8 digital inputs/outputs. Digilent 6069-410-003
Retired
No product available!
HAT MCC 172 module for Raspberry Pi. Provides 2 inputs with 24 bit resolution for IEPE sensors such as accelerometers and microphones. Digilent 6069-410-004
Retired
No product available!
HAT MCC 172 module for Raspberry Pi. Provides 2 inputs with 24 bit resolution for IEPE sensors such as accelerometer and microphone. Two coaxial cables are included. Measurement Computing MCC 172
Retired
No product available!
High voltage differential probe. It is characterized by good measurement parameters: with a 100 MHz band and an operating voltage up to 700 V. The probe has two attenuation factors: 10X and 100X. Micsig DP10007
Retired
No product available!
The expansion board with the LoRaWAN SX1302 and GNSS L76B module is dedicated to Raspberry Pi minicomputers. The kit includes the 868M antenna, GPS and necessary cables. Waveshare SX1302 LoRaWAN Gateway HAT
Retired
No product available!
The module with the LoRaWAN ASR6501 system and an external antenna, designed for the M5Stack sets. M5Stack U117
Retired
No product available!
The LoRaWAN SX1302 module is equipped with a Mini-PCIe connector. It uses the SPI or I2C interface for communication. Waveshare SX1302 868M LoRaWAN Gateway
Retired
No product available!
Alkaline battery A27 12V 7.6x27.3 mm with a capacity of 25 mAh
Retired
No product available!
Black ABS ESD filament with a diameter of 1.75 mm. 0.75 kg of filament is wound on the spool. Fiberlogy ABS ESD Black
Retired
No product available!
100-pin connector (socket) for Raspberry Pi CM4 modules. Pitch 0.4 mm, height 1.14 mm
Retired
No product available!
ToF distance sensor module based on the VL6180X system. It offers a range of 2 to 50 cm and communicates via the I2C interface
Retired
No product available!
Graphic display 128 x 64 pixels, 68.7 x 48.5 mm, Type: COG, FSTN, reflective (without backlight), ST7565R. Artronic LCD-AG-C128064CF-FGN NO/-E6
Retired
No product available!
A portable 65 W soldering iron has an adjustable operating temperature in the range from 100°C to 400°C. It can be powered by a 12-24 V adapter or a battery with an XT60 connector. The set includes a soldering iron and a BC2 tip
Retired
No product available!
Pmod cable set consisting of a 2x6 pin adapter to a double 6 pin connector and a 2x6 pin extension cable. Digilent 240-021-12
Retired
No product available!
Universal EEPROM, Flash (NAND and NOR), eMMC, SRAM and MCU memory programmer. It is controlled from the computer via the USB interface and software for Windows systems. XGecu T56
Retired
No product available!
Adapter dedicated to the XGecu T56 universal memory programmer. Allows memory support in the BGA64 package
Retired
No product available!
The two-channel DDS signal generator with a range of up to 30MHz offers precise signal generation with DDS technology and a resolution of up to 0.01uHz. The device has 12-bit vertical resolution, 1mV amplitude resolution and an output impedance of 50Ω. Junctek JDS6600-30