- Out-of-Stock
Board with RP2040 microcontroller equipped with two ARM Cortex-M0+ 133 MHz cores, 264 kB RAM. There is also 2 MB of QSPI flash memory on the board. The circuit can be programmed in C/C++, CircuitPython or MicroPython. SB Components 26531
The board is equipped with the RP2040 microcontroller designed by the Raspberry Pi foundation. The system has two ARM Cortex M0+ cores operating at a frequency of up to 133 MHz, 264 kB of RAM and 30 GPIO ports. The microcontroller is not equipped with flash memory, but on the board there is an external memory with a capacity of 2 MB connected via the QSPI interface.
On the board, apart from the RP2040 chip and Flash memory, the user will find a 3.3 V voltage stabilizer, Boot buttons, USB type C connector for powering and programming the module and 23 GPIO outputs, on which peripherals such as four 12-bit ADC inputs, PWM outputs, two I2C, SPI and UART interfaces.
The platform supports popular programming languages, including MicroPython and C/C++. Programs can be uploaded to the memory using the USB interface. The module has a spacing of connectors compatible with breadboards, which facilitates prototyping of devices. Full documentation is available on the product page.
Data sheet
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. KApico RP2040
No product available!
Cable with USB type A and USB type C plugs, length 2m, white
No product available!
The board with the RP2040 microcontroller equipped with two ARM Cortex-M0 + cores operating at a frequency of 133 MHz, 264 kB RAM. There is as much as 16 MB of QSPI flash memory on the board. The system can be programmed in C / C ++ or microPython. Soldered connectors. KApico RP2040
DCC DECODER CONTROL OF A RAILING MASK - PLATE AND PROGRAMMED LAYOUT
No product available!
THE SOUNDER GENERATOR TO THE RAILWAY MAKEUP - PLATE AND PROGRAMMED LAYOUT
No product available!
No product available!
CONTROLLER OF FOUR CHAMBER 2 SEMAFORMS - PLATE AND PROGRAMMED LAYOUT
No product available!
SEMAFORA 5 CHAMBER MOTOR AND SAFETY SHIELD - PLATE AND PROGRAMMED LAYOUT
No product available!
CONTROLLER OF FOUR REFUGEES FOR CYLINDERS - PRINTED PLATES AND PROGRAMMED SYSTEM
No product available!
No product available!
No product available!
No product available!
WAGON LIGHTING WITH DCC DECODER - PRINTED BOARD AND CONTROLLED LAYOUT
No product available!
No product available!
No product available!
3-CHANNEL DEVICE FOR REMOTE CONTROLLING - SET ASSEMBLED AND STARTED
No product available!
No product available!
No product available!
No product available!
Board with RP2040 microcontroller equipped with two ARM Cortex-M0+ 133 MHz cores, 264 kB RAM. There is also 2 MB of QSPI flash memory on the board. The circuit can be programmed in C/C++, CircuitPython or MicroPython. SB Components 26531