- Out-of-Stock
Inky Frame 7.3" - module with 7-color e-Paper display 7.3" 800x480 and Raspberry Pi Pico W
ID: 1188253
Module with a 7-color ACeP e-Paper display with a diagonal of 7.3" and a resolution of 800 x 480 pixels, equipped with Raspberry Pi Pico W. It offers WiFi communication and has built-in buttons with LED indicators, which allows you to build a simple user interface. Pimoroni PIM655
Description
Module with a 7-color e-Paper display with a diagonal of 7.3" and a resolution of 800 x 480 pixels. The display is controlled by a Raspberry Pi Pico W board with an RP2040 microcontroller equipped with two ARM Cortex-M0+ cores operating at a frequency of 133 MHz, 264 kB RAM and 2 MB of external QSPI Flash memory. The board also has an additional 8 MB PSRAM memory serving as a data buffer for the display. Additionally, the board is equipped with the Infineon CYW43439 chip, extending the board with WiFi wireless connectivity.
The display supports ACeP (Advanced Color ePaper) technology, and the built-in controller communicates via the SPI interface. e-Paper screens are characterized by high contrast of the displayed image and consume electricity only when the displayed content changes. The module has five built-in buttons with LED indicators, two Qwiic/Stemma QT connectors for additional sensors, and a micro SD card slot for data storage. The module can be placed on a desk thanks to the included metal legs, and the battery connector allows you to power the module with a battery without the need to connect long cables.
Features
- Raspberry Pi Pico W
- Dual Arm Cortex M0+ operating at up to 133 MHz with 264 kB of SRAM memory
- 2 MB QSPI flash memory supporting XiP
- Powered and programmable via USB micro-B
- 2.4 GHz wireless communication
- 7.3-inch EPD display (800 x 480 pixels)
- E Ink Gallery Palette™ ePaper
- ACeP (Advanced Color ePaper) 7-color with black, white, red, green, blue, yellow, orange
- Ultra-wide viewing angle – >170°
- Pixel size: 0.2 x 0.2 mm
- 5 x touch buttons with LED indicators
- Two Qwiic/Stemma QT connectors
- microSD card slot
- External PSRAM memory with a capacity of 8 MB
- PCF85063A RTC chip
Kit contains
- Inky Frame 7.3" with Raspberry Pi Pico W
- 2 x metal feet
1188253
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 2 MB
- Number of I/O
- 40
- Ethernet
- none
- WiFi/BT module
- Yes
- Bluetooth module
- No
- MicroSD slot
- Yes
- Screen type
- E-Ink/Epaper
- Diagonal (inch)
- 7,3
- Resolution
- 800 x 480 px
- Interface
- SPI
- Touch
- Yes
- Length
- 170,2 mm
- Width
- 111,2 mm
- USB connector type
- microUSB type B
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
zł3.21
24h
Available quantity: 23
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.00
24h
Available quantity: 11
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CA-USBM-10CC-0010-BK
zł3.48
24h
Available quantity: 31
Available
Other products in the same category (16)
No product available!
No product available!
8x2 Character LCD - Black Bezel (Parallel Interface)
Retired
No product available!
20x4 Character LCD with LED Backlight (Parallel Interface), White on Blue
Retired
No product available!
No product available!
Pololu RP5 Expansion Plate RRC07A (Narrow) Solid Black
Retired
No product available!
Dagu Rover 5 Tracked Chassis with Encoders
Retired
No product available!
Motor with plastic gear 228:1, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 45 RPM and a maximum torque of 7.2 kg*cm. Pololu 1118
Retired
No product available!
120:1 Plastic Gearmotor Offset OutputPlastic gear motor 120:1, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 85 RPM and maximum torque of 5.4 kg*cm. Pololu 1119
Retired
No product available!
Plastic gear motor 200:1, output shaft at 90°, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 51 RPM and a maximum torque of 7.2 kg*cm. Pololu 1120
Retired
No product available!
Solarbotics GMPW-Y YELLOW Wheel with Encoder Stripes, Silicone Tire
Retired
No product available!
Plastic gear motor 200:1, output shaft at 90°, operating voltage 6 V, current consumption from 0.07 A to 0.8 A, speed 85 RPM and a maximum torque of 5.4 kg*cm. Pololu 1121
Retired
No product available!
The adapter is designed for mounting LEGO wheels on an axis with a diameter of 2 mm used, among others. in Pololu mini motors with a plastic gear. Pololu 1001
Retired
No product available!
A small motor with a plastic gear 120:1, the output shaft with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 120 RPM and maximum torque 1.4 kg*cm. Pololu 1125
Retired
No product available!
A small motor with a plastic gear 180:1, the output shaft at an angle of 90° with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 80 RPM and maximum torque 2.2 kg*cm. Pololu 1593
Retired
No product available!
A small motor with a plastic gear 180:1, the output shaft with a diameter of 3mm in the shape of the "D", operating voltage 4.5 V, current consumption from 0.08 A to 0.8 A, speed 80 RPM and maximum torque 2.2 kg*cm. Pololu 1594
Retired
No product available!
Module with a 7-color ACeP e-Paper display with a diagonal of 7.3" and a resolution of 800 x 480 pixels, equipped with Raspberry Pi Pico W. It offers WiFi communication and has built-in buttons with LED indicators, which allows you to build a simple user interface. Pimoroni PIM655