- Out-of-Stock
zł10,639.61
.png)
New products
New products New products
Automation 2040 W Mini - expansion module for home automation with Raspberry Pi Pico W
ID: 1188256
769894022924
Expansion module with a Raspberry Pi Pico W board equipped with WiFi communication. The module has a built-in relay, buffer inputs, sink outputs and analog inputs. Perfect for controlling fans, pumps, solenoid valves, large motors, electronic locks or LED lighting. Pimoroni PIM652
Opis
An expansion module intended for projects related to home automation, included with the Raspberry Pi Pico W board. It is equipped with a relay with a maximum switched current of up to 2 A, which can work with devices powered by a voltage of up to 40 V. In addition, the user has two buffer inputs at their disposal. , two sink outputs and three analog inputs with an operating range of up to 40 V. The analog inputs are operated by a 12-bit ADC converter, and the sink outputs can provide a current of up to 4 A. All inputs and outputs are connected to screw connectors. Additionally, the user has a Qwiic/Stemma QT connector with an I2C interface enabling the connection of sensors and communication with external modules.
The set is controlled by a board with an RP2040 microcontroller equipped with two ARM Cortex-M0+ cores operating at 133 MHz, 264 kB RAM and 2 MB of external QSPI flash memory. Additionally, the board is equipped with the Infineon CYW43439 chip, which extends the board with wireless connectivity. The product page includes a dedicated library in Python and C++ and a guide to help you start working with the board.
Właściwości
- Raspberry Pi Pico W
- Dual Arm Cortex M0+ działający z częstotliwością do 133 MHz z 264 kB pamięci SRAM
- 2 MB pamięci flash QSPI obsługującej XiP
- Zasilany i programowalny przez USB micro-B
- Bezprzewodowa komunikacja 2,4 GHz
- 3 x 12-bitowe wejścia ADC do 40V
- 2 x wejścia cyfrowe do 40V
- 2 x cyfrowe wyjścia źródłowe przy V+ (napięcie zasilania)
- Maksymalny prąd ciągły 4A
- Maksymalny prąd 2A przy 500Hz PWM
- 1 x przekaźnik (zaciski NC i NO)
- 2A do 24V
- 1A do 40V
- Zaciski śrubowe 3,5 mm do podłączenia wejść, wyjść i zasilania zewnętrznego
- 2 x przyciski dotykowe ze wskaźnikami LED
- Przycisk reset
- 1 x złącze Qwiic/Stemma QT
- Otwory montażowe M2.5
1188256
Data sheet
- Microcontroller
- RP2040
- Flash memory
- 2 MB
- Number of I/O
- 26
- Ethernet
- none
- WiFi/BT module
- No
- Bluetooth module
- No
- MicroSD slot
- No
- Length
- 52 mm
- Width
- 66 mm
- USB connector type
- microUSB type B
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Cable with USB typ A and microUSB typ B connectors, cable length 1 m. LANBERG CCP-MUSB2-AMBM-W-1M
zł2.87
24h
Available quantity: 33
Available
Cable with USB typ A and microUSB typ B connectors, cable length 1.8 m. LANBERG CA-USBM-10CC-0018-BK
zł4.00
24h
Available quantity: 47
Available
Other products in the same category (16)
DAQ device based on USB communication and equipped with 16 analog outputs, 8 digital inputs/outputs and one 32-bit counter. Offers 16-bit resolution. Digilent 6069-410-029
Retired
No product available!
DAQ device based on USB communication and equipped with 8 differential analog inputs and 8 digital inputs/outputs. It offers 24-bit resolution and is dedicated to temperature measurements. Digilent 6069-410-065
Retired
No product available!
DAQ device based on Ethernet communication and equipped with 24 digital inputs/outputs and a counter input. It allows you to control devices via the Internet. Digilent 6069-410-052
Retired
No product available!
DAQ device based on USB communication and equipped with 96 digital inputs/outputs and a 32-bit counter. Digilent 6069-410-032
Retired
No product available!
DAQ device based on USB communication and equipped with 8 differential analog inputs, 8 digital inputs/outputs and a counter input. It offers 24-bit resolution and is dedicated to temperature measurements. Digilent 6069-410-020
Retired
No product available!
DAQ device based on USB communication and equipped with 8 counter inputs, 4 PWM outputs and 8 digital IOs. Digilent 6069-410-028
Retired
No product available!
Camera module with IMX519 sensor dedicated to Raspberry Pi minicomputers. It uses a 16 MP matrix and allows you to record video in resolutions of 1080p @ 30fps. Waveshare IMX519-78 16MP AF Camera
Retired
No product available!
The EN11-VNB1BQ15 incremental encoder is a precise component for detecting the angle of rotation, with a quadrature output with a resolution of 20 pulses per revolution, ideal for position and speed control. Thanks to THT mounting, 5V power supply and low current consumption, it will be perfect for automation and robotics systems.
Retired
No product available!
Class D digital audio amplifier with Bluetooth 5.0 module. It has two channels with a power of 50 W and can work with speakers from 2 to 8 Ω. Powered with DC voltage from 12 to 24 V. Fosi Audio BT20A
Retired
No product available!
Digital mono audio amplifier based on the TPA3118 chip. It has one channel with a power of 60 W and can work with speakers from 4 to 8 Ω. It is powered with the voltage from 12 to 24 V
Retired
No product available!
Universal silicone cover that protects the LED strip from moisture, water, and dirt. Provides protection in accordance with the IP67 standard.
Retired
No product available!
IC socket in DIP08 package, 8-pin, 2.54 mm pitch, 7.62 mm pitch, RoHS
Retired
No product available!
IC socket in DIP14 package, 14-pin, 2.54 mm pitch, 7.62 mm pitch, RoHS
Retired
No product available!
IC socket in DIP16 package, 16-pin, 2.54 mm pitch, 7.62 mm pitch, RoHS
Retired
No product available!
4.3-inch capacitive screen with a resolution of 480 x 272 pixels, ideal for touch applications. It features an I2C interface, low power consumption, and a wide operating temperature range. NXP
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Litofan White
Retired
No product available!
Expansion module with a Raspberry Pi Pico W board equipped with WiFi communication. The module has a built-in relay, buffer inputs, sink outputs and analog inputs. Perfect for controlling fans, pumps, solenoid valves, large motors, electronic locks or LED lighting. Pimoroni PIM652