.png)
- Out-of-Stock
UGears Aviator - mechanical model kit
ID: 1185510
Do you fly in your dreams? Do you like the feeling? Once again Ugears makes the dream come true reaching out to the sky with its first ever aircraft model represented by two flying machines in one package. Introducing – The Aviator model.
The model has three modules: the airplane, the helicopter and the flight control tower. Choose between your aircraft, set one on the tower’s bar and you are good to fly. As a beginner pilot you might want to start with the helicopter which is not as difficult to control as the airplane. Easier to manipulate but no less exciting, your chopper has a cockpit with doors that open and shut, and three-blade main and tail rotors. UGears 70053
Description
The airplane has a higher velocity and requires a certain skill to operate. This module is based on the wire-braced biplane and has a 5 piston motor. To learn how to fly this wayward bird you may need several flight hours – but it is of course part of the fun! Besides, you would have already become acquainted with the basics if you started with the copter.
However, your cockpit is the control tower, a sophisticated device with a high-performance motor that powers the rotation of the swash plate with the bar – with an aircraft on one side and balance weight on the other.
The control tower is operated with two control bars:
- the control column regulates the roll and pitch of the flying machine;
- and the Motor controller to adjust RPM (revolutions per minute) sets the speed of the aircraft.
Fine tuning ensures the proper operation of the swash plate.
When all three units are assembled and you are ready to dive into the sky, it is time to wind up the motor. Make sure you don’t overextend the rubber bands in the motor – maximum winding must not exceed 25 half-turns. Hold on to the control column while releasing the Motor controller’s lock to launch your model.
Hang on to the wheel, throw caution to the wind, and fly – for the sky is the limit with your new Aviator model from Ugears.
The Ugears Aviator model kit is made of high grade wood and has everything you might need for assembly. The quality of the parts is top-notch: a laser method is used for cutting items from a plywood board that provides precise hairline cuts. The details have to be pulled out of the boards and assembled to create a complete model. Like all other Ugears models, the Aviator comes with step-by-step, full-color, truly easy to follow instructions in 11 languages (English, German, Ukrainian, French, Polish, Spanish, Russian, Turkish, Italian, Chinese and Korean) and requires neither glue nor special tools to be fully assembled into functional flying model.
Features
- Model: 70053
- Level: Very hard
- Number of components: 726
- Model size: 40 x 34 x 31 cm
- Package size: 37.8 x 17 x 5 cm
- Shipping weight: 1.700 kg
- Estimated time for assembly: 14-16 hours
- EAN: 4820184120839
1185510
Data sheet
- Difficulty level
- Very difficult
- Assembly time
- 14 - 16 h
Other products in the same category (16)
No product available!
No product available!
Development kit with Leon Instruments AVR ATxmega128A3U microcontroller. Full set. Opportunity to cooperate with Arduino shields.
Delivery date unknown
No product available!
Development kit with Leon Instruments AVR ATxmega128A3U microcontroller. Set in the SMD version - lack of some through-hole components. Opportunity to cooperate with Arduino shields.
Delivery date unknown
No product available!
VL6180X explorer kit, STM32 F401RE nucleo board and VL6180X expansion board, STM
Delivery date unknown
No product available!
TFT display module 3.2 with touchpanel and SD card slot, 40-pin
Retired
No product available!
Graphic display 128x32; 67.5x25.2mm, type: COG, FFSTN Negative, Transmissive, 3.3V UC1601, RGB backlight
Retired
No product available!
No product available!
No product available!
No product available!
TFT 2.8 "display module, touch panel, four buttons, dedicated to Raspberry Pi, RoHS
Retired
No product available!
The ultrasonic distance sensor modUS-015 is based on the analysis of the delay of reflection of the ultrasonic wave from the obstacle - the range of the sensor from 2 to 400 cm with an accuracy of 0.3 cm + 1%
Retired
No product available!
Single-channel Schmitt trigger inverter from the AHC logic family, designed for operation in a wide supply voltage range of 2.0–5.5 V. The SOT-23 package enables compact SMD mounting in digital designs.
Retired
No product available!
MYIR MYC-SAMA5D36 is a single board computer in the form of a card with SO-DIMM 200-pin connector. It has been equipped with the SAMA5D36 processor from Atmel, based on Cortex-A5 cores. It can work with a maximum frequency of 536 MHz. It has 512 MB DDR2 SDRAM, 256 MB NAND FLASH memory. GPIO ports, interfaces have been derived on the SO-DIMM 200-pin connector
Retired
No product available!
No product available!
No product available!
Do you fly in your dreams? Do you like the feeling? Once again Ugears makes the dream come true reaching out to the sky with its first ever aircraft model represented by two flying machines in one package. Introducing – The Aviator model.
The model has three modules: the airplane, the helicopter and the flight control tower. Choose between your aircraft, set one on the tower’s bar and you are good to fly. As a beginner pilot you might want to start with the helicopter which is not as difficult to control as the airplane. Easier to manipulate but no less exciting, your chopper has a cockpit with doors that open and shut, and three-blade main and tail rotors. UGears 70053