- Out-of-Stock
New products
New products New products
zł343.01
24h
Available
Available
Available
Available
Available
Lead-free tin Sn99Cu0.7Ag0.3 0.38mm 100g
ID: 234238
Lead-free tin Sn99Cu0.7Ag0.3 with EVO11 flux, 100 g spool, 0.38 mm diameter. Cynel SAC307-0.38/100
Description
Lead-free tin by Cynel with flux on a spool of 100 g, diameter 0.38 mm. Sn99Cu0.7Ag0.3 alloy produced from the purest raw materials in accordance with ISO EN 9453:2014.
The binder is intended for manual and mechanized soldering in electronics, electrical engineering and other branches where compliance with the RoHS2 directive is required.
Features
Chemical characteristic
- Tin content: approx. 99%
- Copper content: 0.5 to 0.9%
- Silver content: 0.2 to 0.4%
- Maximum pollution:
| Pb | Sb | Bi | Cu | Au | In | Ag | Al | As | Cd | Fe | Ni | Zn |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 0,07 | 0,1 | 0,006 | 0,9 | 0,005 | 0,1 | 0,4 | 0,001 | 0,03 | 0,002 | 0,02 | 0,01 | 0,001 |
Physical characteristics
- Melting point: 227°C
- Specific weight: 7.33 g/cm3
- Tensile strength at break: 300 kg/cm2
- Elongation at Break: 22%
- Hardness: 14 HB
- Recommended soldering tip temperature: 340 to 420°C
234238
Data sheet
- Alloy
- Sn99Cu0,7Ag0,3
- Diameter
- 0,38 mm
- Weight
- 100 g
Manufacturer CYNEL-UNIPRESS SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Białołęcka 231 B 03-253 Warszawa Poland cynel@cynel.com.pl
Responsible person CYNEL-UNIPRESS SPÓŁKA Z OGRANICZONĄ ODPOWIEDZIALNOŚCIĄ Białołęcka 231 B 03-253 Warszawa Poland formularz kontaktowy na stronie osoby odpowiedzialnej
You might also like
Solder tape used to collect excess tin, 1 mm wide, 1.5 m long
zł5.72
24h
Available quantity: 9
Available
The sucker is a tool necessary to remove excess brazing material during desoldering of electronic components. NAR0032
zł9.90
Delivery date unknown
No product available!
Tape, in the form of a braid, to remove the excess of molten solder brazing material during soldering and desoldering of electronic components 1.5m
zł8.65
24h
Available quantity: 7
Available
Tape, in the form of a braid, for removing excess molten solder binder when soldering and desoldering electronic components, 1.5mm wide and 1.5m long.
zł4.15
24h
Available quantity: 39
Available
Other products in the same category (16)
Professional tool for clamping concentric connectors RG58, RG59, RG52. HT106D / HY-106D
Retired
No product available!
High quality tool for clamping sleeves for coaxial cable RG58, RG59, RG6. YAC-3
Retired
No product available!
A professional tool for crimping connectors for AWG cable: 6/10/16, has a six-step adjustment of the clamping force and a mechanism for locking the return of the arms. YAC-6
Retired
No product available!
Multifunctional tool for crimping insulated connectors on AWG 22-18 / 16-14 / 12-10 cable, with locking function and pressure regulation. HT-301
Retired
No product available!
Multifunctional tool for crimping insulated connectors on AWG 22-20 / 16-18 / 12-10 cable, has a locking function and the ability to adjust the pressure. HT-301E
Retired
No product available!
64-bit quad-core mini single board computer; features 2GB of RAM and 8GB eMMC; onboard WiFi and BT; 2 USB A 2.0 ports, 1 USB OTG port, 1 HDMI port, 1 audio jack, and lastly a DC power port
Retired
No product available!
Banana PI BPI-M2 Ultra is the open source hardware platform, Banana PI BPI-M2 Ultra is a quad-core cortex -A7 CPU ,use Allwinner R40 design, it support WIFI+BT on board.and support SATA interface on board
Retired
No product available!
The RASPBERRYPI-2-MODB-1GB is a second generation Raspberry Pi
Retired
No product available!
Waveshare camera module with OV7670 chip, 0.3 megapixels, resolution up to 640x480 pixels. It enables downloading of images in various formats via the Serial Camera Control Bus (SCCB) interface at 30 fps. Waveshare 9828
Retired
No product available!
Raspberry Pi 3 & MathWorks Learn to Program Pack is a set consisting of a Raspberry Pi 3 computer with necessary hardware and MATLAB & Simulink Student Suite software. The set is designed for modeling and implementing solutions based on Raspberry Pi 3 in MATLAB and SIMULINK environments
Retired
No product available!
IBM Watson IoT Platform is a set containing a computer Raspberry Pi 3 model B and Shield Raspberry Pi Sense HAT together with a course on modeling, simulation and analysis of projects related to Raspberry Pi 3 in IoT (Internet of Things) systems. PI3 IBM IOT LEARNKIT
Retired
No product available!
Battery: Li-Ion; 3.7V; 400mAh; Outputs: wires with 2-pin JST-PH connector; 50.8 mm x 33.5 x 5.9 mm. PRT-13851
Retired
No product available!
The GY-GPS6MV1 module is a board containing the U-blox NEO-6M GPS receiver system. The tile also includes RTC backup battery, antenna connector (U.FL), voltage stabilizer and UART signal outputs
Retired
No product available!
3DR Radio is a set that allows bidirectional transmission of telemetry data, eg between the RC model (with the APM controller) and a PC. Light and small device in a set with antennas and connecting cables. Radio modules have a power of 100mW (+ 20dBm) and transmit a signal over a distance of 1km.
Retired
No product available!
A small USB splitter allowing to connect up to 4 USB devices, powered from the USB port
Retired
No product available!
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. Each Teensy 3.2 comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! PJRC TEENSY32
Retired
No product available!
Lead-free tin Sn99Cu0.7Ag0.3 with EVO11 flux, 100 g spool, 0.38 mm diameter. Cynel SAC307-0.38/100