- Out-of-Stock
Sthor 79354 transformer soldering iron with a power of 100W and a 230V power supply, quickly heats the tip to 350°C (20-25 seconds), equipped with a spot working backlight, replaceable tips (1.5-2.0 mm), rosin, tin and a suitcase, requires regular tinning of the tip and following the work cycle (12 seconds of soldering, 48 seconds of break) for optimal efficiency and to avoid damage. Sthor - 79354
The Sthor 79354 transformer soldering iron with a power of 100W is an advanced tool with a standard design, which additionally offers spot illumination of the work area. This innovative solution allows for precise soldering, even in hard-to-reach or poorly lit places. The soldering iron quickly heats up to approximately 350°C in just 20 to 25 seconds, ensuring efficiency and speed of work.
How to care for your mainsail
To ensure long-term performance of the tip, regular tinning is recommended. Covering the tip with a layer of tin during the first warm-up and tinning each time after finishing work prevents oxidation and guarantees better adhesion of the solder binder.
Attention!
Transformer soldering irons, such as the Sthor 79354, work best when following a duty cycle of 12 seconds of soldering and 48 seconds of rest. This allows you to maintain optimal operating parameters and avoid overheating of the transformer, which could result in its damage.Manufacturer
Responsible person
Easy PET-G filament in pure transparent with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Pure Transparent
No product available!
Easy PET-G filament in silver with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G Silver
No product available!
Easy PET-G filament in white with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PET-G White
No product available!
Easy PLA filament in graphite, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Graphite
No product available!
Easy PLA filament in gray, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Gray
No product available!
Easy PLA filament in inox, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Inox
No product available!
Easy PLA filament in red, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Red
No product available!
Easy PLA filament in Vertigo, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Vertigo
No product available!
Easy PLA filament in white, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA White
No product available!
Easy PLA filament in yellow, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Yellow
No product available!
Kit with LS1046A Freeway development board equipped with 4-core LS1046A processor, 4 GB RAM, 4GB Flash, 4 Gigabit Ethernet connectors, 2 USB 3.0 connectors, microSD slot and two M.2 slots. NXP FRWY-LS1046A-AC
No product available!
ABS filament in yellow with a diameter of 1.75 mm. 0.85 kg of filament is wound on a spool. Fiberlogy ABS Yellow
No product available!
Adapter for connecting a Raspberry Pi to the OM-SE050ARD development board. It allows you to run the EdgeLock SE050 application on a Raspberry Pi. NXP OM-SE050RPI
No product available!
LPC55S69JEV98K, ARM Cortex-M33 Microcontroller, 32 bit, 150 MHz, 640 KB Flash, VFBGA98
No product available!
USB - CAN converter module. It allows the device to be connected to a computer (USB) or microcontroller (UART) via the CAN bus. USB CAN CONVERTER (UCCB)
No product available!
Set with HQ camera, HDMI adapter, lens, tripod and Jetvariety adapter. Kit designed for NVIDIA Jetson Nano. ArduCAM B0243
No product available!
Sthor 79354 transformer soldering iron with a power of 100W and a 230V power supply, quickly heats the tip to 350°C (20-25 seconds), equipped with a spot working backlight, replaceable tips (1.5-2.0 mm), rosin, tin and a suitcase, requires regular tinning of the tip and following the work cycle (12 seconds of soldering, 48 seconds of break) for optimal efficiency and to avoid damage. Sthor - 79354