- Out-of-Stock
zł10,639.61
.png)
New products
New products New products
Bambu Lab PLA Basic Purple - with spool
ID: 1192456
6975337031932
Bambu Lab PLA Basic is a versatile PLA filament, ideal for fast and precise 3D printing, ensuring excellent print quality. Bambu Lab PLA Purple
Description
The BambuPLA Basic filament is an excellent choice for people looking for a reliable and easy-to-use 3D printing material. PLA is the most commonly used material in additive technology due to its affordability, ease of printing, and adequate stiffness and strength for most applications. BambuPLA Basic is distinguished by the ability to quickly print at speeds of up to 250-300 mm/s, maintaining excellent strength and adhesion of layers.
Properties
- Filament type: PLA Basic
- Diameter: 1.75 mm
- Filament net weight: 1 kg
- Drying settings before printing: 55 °C for 8 hours
- Humidity during printing and storage: < 20% RH (closed storage with a dehumidifier)
- Nozzle temperature: 190 - 230 °C
- Table type: Cool plate, high temperature or PEI textured plate
- Preparation of the table surface: PVP glue Table temperature: 35 - 45 °C
- Cooling Fan: 100%
- Printing speed: < 300 mm/s
- Retraction length: 0.6 - 1.0 mm
- Retraction speed: 20 - 40 mm/s
- Chamber temperature: 25 - 45 °C
- Maximum hanging angle: 55°
1192456
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 1 kg
- Diameter
- 1,75 mm
- Colour
- Purple
- Type of packaging
- Spool
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Other products in the same category (16)
relative humidity sensor with integrated temperature sensor for highly accurate measurements at low power. With the TI HDC1080, you can determine the relative humidity of the environment with up to 14 bits of resolution. Digilent 410-347
Retired
No product available!
With an on board Microchip PIC16 MCU, two-axis joystick on a center button, a trigger button, and a programmable RGB LED capable of 24-bit color, the Pmod JSTK2 is ideally suited for Digilent microcontroller or FPGA-based projects that require proportional control from the user, such as robotic applications. Digilent 410-330
Retired
No product available!
NanoPi NEO is a miniature board with the all-in-one SoC Allwinner H3 chip (ARM Cortex-A7) with built-in Ethernet communication. Works with Ubuntu MATE, Debian, etc. It can be powered by the microUSB port. The board also contains a USB port, a serial port and a 36-pin GPIO connector
Retired
No product available!
NanoPi NEO is a miniature board with the all-in-one SoC Allwinner H3 chip (ARM Cortex-A7) with built-in Ethernet communication. Works with Ubuntu MATE, Debian, etc. It can be powered by the microUSB port. The board also contains a USB port, a serial port and a 36-pin GPIO connector.
Retired
No product available!
NanoPi NEO Air is a miniature board with the SoC Allwinner H3 quad-core system (ARM Cortex-A7) with built-in WiFi and Bluetooth communication. It works with Ubuntu MATE, Debian etc. It can be powered by a microUSB port
Retired
No product available!
NanoPi A64 single board computer (SoC) with A64 Allwinned processor, SoC (ARM Cortex A-53) and dedicated FriendlyCore-Xential and UbuntuMATE operating systems
Retired
No product available!
Minicomputer with a quad-core processor (up to 1.4GHz) and 1 GB of DDR3 RAM, 8 GB of eMMC Flash memory. It has a WiFi 2.4G module and video interfaces in the form of HDMI, as well as USB2.0, MicroSD, Ethernet port and 3.5mm audio socket. FriendlyELEC NanoPC T2
Retired
No product available!
Minicomputer with an octa-core processor (up to 1.4GHz) and 2 GB of DDR3 RAM memory, 8 GB of eMMC Flash memory. It has a WiFi 2.4G module and video interfaces in the form of HDMI, as well as USB2.0, MicroSD, Ethernet port and 3.5mm audio socket. FriendlyELEC NanoPC T3
Retired
No product available!
No product available!
Orange Pi 2G-IoT is a minicomputer with a powerful ARM Cortex-A5 processor. The computer is equipped with a GSM / GPRS (2G) module, 256 MB LPDDR2 RAM, a WiFi module and a CSI camera connector, USB Host, OTG, 26 GPIO and a microSD card slot. Works with Android, Ubuntu and Debian systems
Retired
No product available!
Orange Pi Prime Development Board H5 Quad-core 2GB DDR3 SDRAM Mini PC
Retired
No product available!
Orange Pi Win 1GB DDR3 RAM A64 Quad-core 64-Bit WiFi Mini PC
Retired
No product available!
Orange Pi Win Plus A64 Quad-core 2GB WIFI Development Board
Retired
No product available!
Orange Pi Win and Win Plus computer case (transparent), made of plastic. It protects and protects your computer against dust and mechanical damage. Properly prepared openings allow you to use all the sockets that Orange Pi Win and Orange Pi Win Plus have been equipped with
Retired
No product available!
Allwinner H5 Quad-core, 512MB DDR3, 8GB eMMC, Bluetooth, Wi-Fi, HDMI
Retired
No product available!
Allwinner H3 Quad-core, 512MB DDR3, 8GB eMMC, Bluetooth, Wi-Fi, HDMI
Retired
No product available!
Bambu Lab PLA Basic is a versatile PLA filament, ideal for fast and precise 3D printing, ensuring excellent print quality. Bambu Lab PLA Purple