- Out-of-Stock
Advanced kit with ESP32-P4, Wi-Fi 6, 10.1" DSI display, 5 MP camera, speaker, cables and accessories - Waveshare 32057
ID: 1201087
5902186330320
ESP32-P4-WIFI6-DEV-KIT-C is the most comprehensive kit with a 10.1" display, camera and full audio-video support, dedicated to HMI applications, intelligent control systems and interactive IoT devices. It provides high performance, multi-protocol connectivity and integration capabilities with AI platforms and industrial-grade security systems.
Description
ESP32-P4-WIFI6-DEV-KIT-C is the most advanced development kit in the ESP32-P4-WIFI6-DEV-KIT series, combining high computing power, Wi-Fi 6 connectivity, multimedia support and advanced HMI interfaces. The main board based on the ESP32-P4 chip (RISC-V, 400 MHz) works with the ESP32-C6 module responsible for wireless connectivity (Wi-Fi 6 and BLE).
The kit includes a 10.1-inch IPS touch display with a resolution of 800×1280 pixels and a MIPI-DSI interface, an OV5647 camera (5 MP, MIPI-CSI interface), an 8 Ω 2 W speaker and a full set of cables and mounting hardware. The board features an Ethernet port, USB OTG connectors, 3.5 mm audio jack output, microphone, microSD slot, 40-pin GPIO header and interfaces for display and camera support.
The device can be powered via USB-C or an external PoE module (not included) and supports AI platforms, voice interaction and advanced hardware security features (Secure Boot, Flash Encryption, TRNG).
Properties
- ESP32-P4 with dual-core RISC-V 400 MHz processor, 32 MB PSRAM, 16 MB Flash
- ESP32-C6 – Wi-Fi 6 (2.4 GHz) and Bluetooth 5/BLE via SDIO
- 10.1″ IPS touch display, 800×1280 px, 10-point capacitive touch (MIPI-DSI)
- Raspberry Pi Camera (B) OV5647 5 MP, MIPI-CSI interface
- RJ45 Ethernet port 100 Mb/s
- USB OTG 2.0 (2× USB-A), USB-C (programming/power)
- microSD slot (SDIO 3.0), 3.5 mm audio jack output, MEMS microphone
- Speaker connector (MX1.25, 8 Ω 2 W)
- 40-pin GPIO header, 28 programmable pins
- Interfaces: MIPI-CSI, MIPI-DSI, I2C, I3C
- RTC with rechargeable backup battery support
- PoE support via PoE HAT connector (module not included)
- AI platform and voice interaction support
- Security mechanisms: Secure Boot, Flash Encryption, TRNG
- Main board dimensions: 85 × 56.5 mm
Included
- ESP32-P4-WIFI6-DEV-KIT x1
- 10.1" IPS touchscreen display, 800×1280 px, MIPI-DSI x1
- Raspberry Pi Camera (B) 5 MP OV5647 x1
- 8 Ω 2 W speaker x1
- FFC cable for camera x1
- 2× FFC cable for display x2
- USB-C cable x1
- USB-A to microUSB cable x1
- SH1.0 4-PIN cable x1
- Set of mounting screws x1
1201087
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
A module with a spectrum sensor that operates in the visible light range (450-650 nm). It allows you to measure and characterize a light source or check how the tested surface absorbs or reflects light at specific wavelengths. Pimoroni PIM412
Retired
No product available!
Module with a UV ultraviolet light sensor VEML6075. It enables measurement of the level of UVA (350-375 nm) and UVB (315-340 nm) radiation. It communicates via the I2C bus. Pimoroni PIM460
Retired
No product available!
Module with 6-axis IMU motion sensor that combines a 3-axis accelerometer and a 3-axis magnetometer in one system. It communicates via the I2C bus. Pimoroni PIM376
Retired
No product available!
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM527
Retired
No product available!
Module with two 5x7 LED matrix displays designed to work with the Raspberry Pi. It uses IS31FL3730 drivers and communicates via the I2C interface. Pimoroni PIM526
Retired
No product available!
The system of a practical clock with an extremely simple design is equipped with a readable LED display, an alarm clock with a snooze function, and battery backup of the clock operation after a power failure
Retired
No product available!
Kit with DA7280 vibration motor driver module and LRA (Linear Resonant Actuator) motor. It allows you to add vibration feedback from the device to the project. SparkFun ROB-18247
Retired
No product available!
No product available!
The Winstar WEH001602ABPP5N00100 OLED display is a character display with dimensions of 80×36×10 mm, capable of displaying 16 characters on 2 lines. It comes with a built-in WS0010-TX controller and operates within a power supply voltage range of 4.8–5.3 V and temperature range of -40°C to 80°C, offering excellent readability thanks to OLED technology.
Retired
No product available!
Kit with Jetson Mate base board designed for SoM modules NVIDIA Jetson Nano and Jetson Xavier NX. It allows you to connect 4 SoM modules and create a home GPU computing cluster or server. Seeed Studio 110991411
Retired
No product available!
Jetson Mate motherboard for NVIDIA Jetson Nano and Jetson Xavier NX. It allows you to connect 4 SoM modules and create a home GPU computing cluster or server. Seeed Studio 114992562
Retired
No product available!
ToF distance sensor (Time of flight) with a range of up to 2.5 m. The module is powered with the voltage of 3.3 V and communicates via the I2C interface. SparkFun SPX-17716
Retired
No product available!
RFID antenna designed for UHF RFID tags. It allows you to increase the effective range of tags to about 2.5 cm. SparkFun SPX-15113
Retired
No product available!
OLED display with a diagonal of 0.91" and a resolution of 128x32 pixels. It is equipped with Qwiic connectors and communicates via the I2C interface. SparkFun LCD-17153
Retired
No product available!
Starter kit with RedBoard development board and Qwiic modules: IMU, environmental sensor, GPS module, joystick, accelerometer, keyboard and proximity sensor, MP3 player, relay and OLED display. SparkFun KIT-16262
Retired
No product available!
QLED IPS 9" display with a touch screen and Quantum Dot technology. The display is equipped with an HDMI interface for image display and USB for the touch panel. Resolution 1280x720 pixels. Waveshare 9HP-CAPQLED
Retired
No product available!
ESP32-P4-WIFI6-DEV-KIT-C is the most comprehensive kit with a 10.1" display, camera and full audio-video support, dedicated to HMI applications, intelligent control systems and interactive IoT devices. It provides high performance, multi-protocol connectivity and integration capabilities with AI platforms and industrial-grade security systems.