- Out-of-Stock
Advanced kit with ESP32-P4, Wi-Fi 6, 7" DSI display, 5 MP OV5647 camera, speaker, cables and accessories - Waveshare 32056
ID: 1201088
5902186330337
ESP32-P4-WIFI6-DEV-KIT-B is a complete development environment with a touch display, camera and speaker, ideal for creating user interfaces, interactive devices and automation systems with Wi-Fi 6, BLE and Ethernet support. The kit enables rapid prototyping of projects with image and sound processing and integration with AI platforms.
Description
ESP32-P4-WIFI6-DEV-KIT-B is the most complete development kit in the ESP32-P4 series, designed for advanced HMI applications, voice control and multimedia processing. The core of the kit is the ESP32-P4-WIFI6-DEV-KIT board based on the ESP32-P4 microcontroller with a dual-core RISC-V processor, supported by the ESP32-C6 module responsible for Wi-Fi 6 and Bluetooth 5 connectivity.
The kit includes a 7-inch capacitive touch display (IPS, 720×1280, MIPI-DSI interface), an OV5647 camera (5 MP, MIPI-CSI interface), an 8 Ω 2 W speaker, FFC and SH1.0 cables and USB cables. The presence of an Ethernet port, USB OTG connectors, microSD slot, 3.5 mm jack connector, microphone and extensive GPIO allows implementing a wide range of projects in the field of IoT, automation and user interfaces.
The kit can be powered via USB-C or an optional PoE module (connector on the board, module not included), and security mechanisms include Secure Boot and memory encryption.
Properties
- ESP32-P4 with 400 MHz RISC-V processor (dual-core), 32 MB PSRAM, 16 MB Flash
- ESP32-C6 – Wi-Fi 6 and Bluetooth 5/BLE (SDIO interface)
- 7-inch IPS display, 720×1280 resolution, 10-point capacitive touch (MIPI-DSI)
- OV5647 camera (5 MP), manual focus, MIPI-CSI interface
- RJ45 Ethernet port (100 Mb/s)
- 2× USB OTG 2.0 (HOST/DEVICE, Type-A connectors), USB-C (power, debugging)
- microSD slot (SDIO 3.0), 3.5 mm audio jack output, MEMS microphone
- Speaker connector (MX1.25, 8 Ω 2 W)
- 40-pin GPIO header, 28 available programmable pins
- RTC with rechargeable battery connection
- Support for AI platforms and online language models
- Power via USB-C or optionally via PoE
- Board dimensions: 85 × 56.5 mm
Included
- ESP32-P4-WIFI6-DEV-KIT x1
- 7-inch IPS DSI display, 720×1280 px, touchscreen x1
- Raspberry Pi Camera (B) 5 MP OV5647 x1
- 8 Ω 2 W speaker x1
- FFC cable for camera x1
- FFC cables for display x2
- USB-C cable for power and programming x1
- USB-A to microUSB cable x1
- SH1.0 4-PIN cable x1
- Mounting screws x4
1201088
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Other products in the same category (16)
Waveshare Mix Board, 4 in 1 adapter plate, includes temperature sensor, infrared receiver, joystick and buzzer
Retired
No product available!
Alphanumeric display OLED 4x20, with built-in controller WS0010, communicating via 6800 interface, optionally 8080 or SPI. Winstar WEH002004AB
Retired
No product available!
Alphanumeric display OLED 4x20, with built-in controller WS0010, communicating via 6800 interface, optionally 8080 or SPI. Winstar WEH002004AW
Retired
No product available!
Printed circuit board to secure - a simple car lock. AVT3187 A
Retired
No product available!
AVT kit for self-assembly protection - a simple car lock. AVT3187 B
Retired
No product available!
Printed circuit board for vapor extraction controller. AVT3215 A
Retired
No product available!
AVT kit for self-assembly of a vapor extraction controller. AVT3215 A
Retired
No product available!
Assembled fume extraction controller. AVT3215 C
Retired
No product available!
No product available!
No product available!
NanoPi NEO Core Allwinner H3 Quad-Core 1,2Ghz + 256MB RAM
Retired
No product available!
NanoPi NEO Core2, Allwinner H5 Quad-Core 1.5Ghz + 1GB RAM + 8GB eMMC, without soldered GPIO pins
Retired
No product available!
NanoPi NEO Core is a small PCB equipped with the SoC Allwinner H3 chip and 512MB RAM. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C, I2S interface. The board can be powered from the Micro USB connector. FriendlyELEC NanoPi NEO Core
Retired
No product available!
NanoPi NEO Plus 2 single board computer (SoC) with Allwinner H5 processor Quad-Core 1GHz + 1GB RAM + 8GB eMMC, SoC (ARM Cortex A-53)
Retired
No product available!
A small minicomputer with the SoC Allwinner H5 quad-core system (ARM Cortex-A53). The system has a built-in 16-core Mali450 graphics coprocessor. The computer is equipped with 512 MB DDR3 RAM. There are images of UbuntuCore and Armbian systems available for the computer. NanoPi NEO2
Retired
No product available!
NanoPi Duo is a small PCB equipped with the SoC Allwinner H2+ system, RAM memory with a capacity of 256 MB and a built-in Wi-Fi module. The GPIO port has been moved, among others Ethernet, USB, SPI, UART, I2C interface. The set is perfect for light IoT applications
Retired
No product available!
ESP32-P4-WIFI6-DEV-KIT-B is a complete development environment with a touch display, camera and speaker, ideal for creating user interfaces, interactive devices and automation systems with Wi-Fi 6, BLE and Ethernet support. The kit enables rapid prototyping of projects with image and sound processing and integration with AI platforms.