- Out-of-Stock
The pyboard is a compact and powerful electronics development board that runs MicroPython. It connects to your PC over USB, giving you a USB flash drive on which to save your Python scripts, and a serial Python prompt (a REPL) for instant programming. With the MicroPython pyboard you gain a low-level Python operating system that you are able to use to control plenty of different electronics projects.
At its heart, the MicroPython pyboard possesses a STM32F405RG microcontroller with a 168 MHz Cortex M4 CPU, 1024KiB flash ROM, and 192KiB of RAM. Each pyboard is also equipped with a microUSB connector for power and serial communications, a microSD card slot, an MMA7660 3-axis accelerometer, 31 GPIO, four LEDs, a reset switch and a user switch. We have two options for the pyboard available: one with headers and one without.
MicroPython is a complete rewrite of the Python (version 3.4) programming language so that it fits and runs on a microcontroller. It includes many optimizations so that it runs efficiently and uses very little RAM. Additionally, MicroPython runs bare-metal on the pyboard, and essentially gives you a Python operating system. The built-in pyboard module contains functions and classes to control the peripherals available on the board, such as UART, I2C, SPI, ADC and DAC.
Manufacturer
Responsible person
Connector for connecting a 30-pin ribbon with a pitch of 0.5 mm to a printed circuit board. F0500WR-S-30PF
No product available!
Kit with heatsink and assembly elements for the NanoPC T4 minicomputer. FriendlyELEC NanoPC T4 Heat SInk
No product available!
Acrylic glass case designed for NanoPC T3 Plus and NanoPC T4 minicomputers. FriendlyELEC T4 & T3 PLUS Acrylic Case
No product available!
A universal IR remote designed for NanoPi M1, powered by two AAA batteries. FriendlyELEC RC-100
No product available!
Module with 3 QTRX type optocoupler with RC (digital) output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4343
No product available!
Module with 3 QTRX type optocoupler with analog output. The module operates from 2.9 V to 5.5 V, detects objects at a distance of up to 30 mm. The sensor will be used in projects that require detection of changes in the ground, e.g. in linefollower robots. Pololu 4443
No product available!
Odroid-MC1 Solo is a minicomputer with an Samsung Exynos5422 processor (ARM® Cortex ™ -A15 Quad 2.0GHz / Cortex ™ -A7 Quad 1.4GHz) which has 2 GB of RAM (LPDDR3) available. The module is dedicated to the construction of computer clusters, has a housing that allows you to connect multiple modules with each other.
No product available!
The ISM radio module in the DIP housing. It operates on the 868 MHz frequency. The module complies with FCC, ETSI regulations. HOPE MICROELECTRONICS RFM12B-868DP
No product available!
The ISM radio module in the SMD housing. It operates on the 868 MHz frequency. The module complies with FCC, ETSI regulations. HOPE MICROELECTRONICS RFM12B-868S2P
No product available!
A GFSK transceiver operating in the ISM 2400 ... 2483.5 MHz frequency range. Powered by a voltage of 1.9 ... 3.6 V, the pins are goldpin connectors. It has a built-in PCB antenna. HOPE MICROELECTRONICS RFM73-D
No product available!
A minisumo robot on a tracked chassis with Pololu 75:1 HP motors. Fully assembled robot, additionally requires four AA batteries. Pololu 3126
No product available!
Printed circuit board and programmed SNAKE electronic game system. AVT5639 A +
No product available!
AVT kit for self-assembly of SNAKE electronic game. AVT5639 B
No product available!
The assembled SNAKE electronic game. AVT5639 C
No product available!
A 12-in-1 construction set that teaches the use of solar and hydraulic energy. KSR17
No product available!
Self-assembly kit without TOBBIE robot soldering. KSR18
No product available!
DEV-14412