- Out-of-Stock
zł2,051.59
zł983.72
New products
New products New products
zł124.67
Delivery date unknown
Available
AVT5034 B
ID: 189911
UNIVERSAL LABORATORY EQUIPMENT - A SELF-ASSEMBLY KIT
UNIVERSAL LABORATORY EQUIPMENT - A SELF-ASSEMBLY KIT
Producer: AVT
Basic parameters:
- Frequency measurement in two ranges: up to 100MHz and from 70MHz to 1GHz. The range up to 100MHz has been divided into two automatically switched sub-ranges: up to 4.9MHz and from 4.8 to 100MHz.
- The counter with a capacity of 4 294 967 293 pulses. The counter can count pulses with a maximum frequency not exceeding 5MHz.
- Temperature measurement in the range from -40 to + 125 o C
- Counting the chips simultaneously connected to the 1WIRE bus and reading their serial numbers.
- Indicating the current time and date.
- Stopwatch with measuring range from 1 second to 65535 hours, 59 minutes and 59 seconds.
- For presenting the measurement results, the LCD alphanumeric display 2x16 characters was used. Both the backlight display and the non-backlight display can be used.
- The meter should be powered with a constant voltage of 7..16Vdc.
- The current consumption depends mainly on the type of display used. If we use the display without backlighting, it should not exceed 60..70mA. The use of a backlit display can drastically increase the power consumption up to 300mA.
- The set includes a printed circuit board, a set of elements and documentation.
Detailed description EP 9/2001
Download
189911
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
No product available!
FM radio kit using the Si4820 and NCP2890. The board has pre-soldered circuits, making the assembly process easier for the user. To complete the radio, simply solder the remaining components, such as resistors and capacitors, and the radio offers tuning and volume control, with sound output from the included 66 mm speaker. The board is powered from 2.5 V to 5.5 V, which allows it to be used with both mains power and AA batteries, and the Si4820 circuit provides excellent radio reception quality. Kitronik 2157
Retired
No product available!
WiFi module dedicated to Coral Dev Board Micro. It uses the Murata LBEE5HY1MW chip and connects to the base board via B2B connectors. Coral G650-07974-01
Retired
No product available!
Kit for building an electronic laboratory based on the TotemDuino board and the LabBoard extension module. It is a great platform for experimenting, learning electronics and programming Arduino. Totem TKM-ML1
Retired
No product available!
Next up in the exciting new line of Ugears 2.5D puzzles, Classic Vehicles collection, we present the Zeppelin—the world\'s first commercial aircraft! Inspired by German airships from the early 20th Century, and named after German inventor Count Ferdinand von Zeppelin, this DIY 2.5D wooden airship model has movable elements and comes in its own frame, suitable for hanging on a wall or placing on a desk or shelf. UGears 70208
Retired
No product available!
No product available!
No product available!
Isopropanol 99.9% (IPA) is an effective and safe cleaner with low electrical conductivity, supplied in a 2l plastic bottle, perfect for professional electronics workshop thanks to its degreasing properties, fast evaporation and precise dosing
Retired
No product available!
Pin strip straight in yellow, single-row, female, 1x10, pitch 2.54mm, THT, RoHS. PB10S YELLOW
Retired
No product available!
3-pin ARK mounting strip, 5.0 mm pitch. 301R-5.0-03P-12-00A(H)
Retired
No product available!
No product available!
No product available!
Orange Pi is a computer with Allwinner A20 processor, 1 GB RAM, 1 Gb Ethernet. There are 4 USB 2.0 ports, a USB OTG port, a GPIO 2x13 connector compatible with Raspberry Pi and a micro-SD card slot. The computer is equipped with a SATA interface.
Delivery date unknown
No product available!
ROSA3D filament made of high-quality PET-G granules. 0.8 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PET-G Standard White
Retired
No product available!
ROSA3D filament made of high-quality PLA granules. 0.5 kg of filament with a diameter of 1.75 mm is wound on the spool. ROSA3D PLA Starter Glow in the Dark Green
Retired
No product available!
Dov M. Gabbay, Paul Thagard, John Woods, Cliff Hooker, John Collier
Delivery date unknown
No product available!
UNIVERSAL LABORATORY EQUIPMENT - A SELF-ASSEMBLY KIT