.png)
- Out-of-Stock
Filament PlastSpaw PLA Eco 1.75mm Silver
ID: 582222
5906623400300
Filament by PlastSpaw with an excellent quality-price ratio. Made of high-quality PLA granules. 1 kg of filament with a diameter of 1.75 mm is wound on the spool
Description
PLA filament for 3D printing with a diameter of 1.75 mm by PlastSpaw. 1 kg of filament is wound on the spool. The recommended printing temperature is in the range from 185°C to 225°C, and the temperature of the bed during printing in the range of 40°C - 60°C, however, when using adhesives, heatbed is not necessary.
PlastSpaw is one of the first Polish producers of filament for 3D printing. Thanks to many years of experience and the use of proven granules, the company is able to provide good quality and accuracy of the diameter and roundness of the filament at the level of 0.05 mm.
PLA is the basic material used in 3D printing. It is characterized by good durability, and its properties allow for precise printing of even complex elements. Thanks to its properties, PLA filament is appreciated by both beginners and professionals. It is biodegradable and has a very good adhesion between the print layers.
Features
- Color: Silver
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +0.05 mm
- Printing temperature: 185°C to 225°C
- Bed temperature: 40°C to 60°C (when using washers or other means to increase the adhesion heating of the table is not required)
- Net weight: 1 kg
582222
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 1 kg
- Diameter
- 1,75 mm
- Colour
- Srebrny
- Type of packaging
- Spool
Manufacturer
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
Responsible person
- BTC Korporacja sp. z o. o.
- Ludwinowo Zegrzyńskie 52G
- 05-140 Ludwinowo Zegrzyńskie
- Poland
- [email protected]
- 22 767 36 20
You might also like
Easy-to-use and intuitive 3D printer with touch display and USB, WiFi and intelligent door support. The printer is fully assembled and ready to use. Flashforge Inventor IIS
Regular pricezł3,704.21zł1,230.00
24h
Available quantity: 1
Available
Easy PLA filament in orange, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Orange
zł75.01
24h
Available quantity: 2
Available
Other products in the same category (16)
Robotics development kit based on the RDK S100 SoC with CPU + BPU + MCU architecture, 128 TOPS (INT8) AI performance, 6x Cortex-A78AE 2.0 GHz, 4x Cortex-R52+, 24 GB LPDDR5, 2x Gigabit Ethernet, 4x USB 3.0, HDMI, 12 - 20 V DC input. D-Robotics RDK S100P
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 110mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0474
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 150mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0153
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 190mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0477
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 250mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0106
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 250mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0384
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 300mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0657
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 400mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0386
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 450mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0486
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 800mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0392
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 800mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0559
Retired
No product available!
Lithium-polymer Li-Po battery with a nominal voltage of 3.7V and a capacity of 850mAh, equipped with a PCM protection circuit and a lead with a JST 2.54 2-pin connector, 150mm long. Akyga AKY0108
Retired
No product available!
Lithium-polymer battery type LP623255 with a nominal voltage of 3.7 V and a capacity of 1100 mAh, equipped with a PCM protection circuit and a JST 2.54 2-pin connector on a 150 mm cable. Akyga AKY0646
Retired
No product available!
Lithium-polymer battery type LP883440 with a nominal voltage of 3.7 V and a capacity of 1200 mAh, equipped with a PCM protection circuit and a JST 2.54 2-pin connector on a 150 mm cable. Akyga AKY0622
Retired
No product available!
LP805080 lithium-polymer battery with a nominal voltage of 3.7 V and a capacity of 4000 mAh, equipped with a PCM protection circuit and a 150 mm lead terminated with a JST 2.54 2-pin connector. Akyga AKY0580
Retired
No product available!
ER26500 lithium battery (C size) with a nominal voltage of 3.6V and a capacity of 8500mAh, manufactured using Li-SOCl₂ technology, designed for long-term powering of electronic devices. Akyga AKY1997
Retired
No product available!
Filament by PlastSpaw with an excellent quality-price ratio. Made of high-quality PLA granules. 1 kg of filament with a diameter of 1.75 mm is wound on the spool