- Out-of-Stock
Filament PlastSpaw PLA Eco 1.75mm Gold
ID: 582221
5906623437504
Filament by PlastSpaw with an excellent quality-price ratio. Made of high-quality PLA granules. 1 kg of filament with a diameter of 1.75 mm is wound on the spool
Description
PLA filament for 3D printing with a diameter of 1.75 mm by PlastSpaw. 1 kg of filament is wound on the spool. The recommended printing temperature is in the range from 185°C to 225°C, and the temperature of the bed during printing in the range of 40°C - 60°C, however, when using adhesives, heatbed is not necessary.
PlastSpaw is one of the first Polish producers of filament for 3D printing. Thanks to many years of experience and the use of proven granules, the company is able to provide good quality and accuracy of the diameter and roundness of the filament at the level of 0.05 mm.
PLA is the basic material used in 3D printing. It is characterized by good durability, and its properties allow for precise printing of even complex elements. Thanks to its properties, PLA filament is appreciated by both beginners and professionals. It is biodegradable and has a very good adhesion between the print layers.
Features
- Color: Gold
- Diameter: 1.75 mm
- Diameter tolerance: +/- 0.05mm
- Oval tolerance: +0.05 mm
- Printing temperature: 185°C to 225°C
- Bed temperature: 40°C to 60°C (when using washers or other means to increase the adhesion heating of the table is not required)
- Net weight: 1 kg
582221
Data sheet
- Rodzaj filamentu
- PLA
- Ilość filamentu
- 1 kg
- Diameter
- 1,75 mm
- Colour
- Złoty
- Type of packaging
- Spool
Manufacturer BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
Responsible person BTC Korporacja sp. z o. o. Lwowska 5 05-120 Legionowo Poland sprzedaz@kamami.pl 22 767 36 20
You might also like
3D printer with dual color print and heated table. The printer is fully assembled and ready to use. Flashforge Creator PRO
Regular pricezł4,365.91zł3,199.00
24h
Available quantity: 1
Available
Easy PLA filament in inox, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA Inox
zł85.01
24h
Available quantity: 2
Available
Easy PLA filament in white, 1.75 mm in diameter. 0.85 kg of filament is wound on a spool. Fiberlogy Easy PLA White
zł75.03
24h
Available quantity: 2
Available
Other products in the same category (16)
Printed circuit board and programmed circuit for a remote radio switch. AVT5590 A +
Retired
No product available!
AVT kit for self-assembly remote radio switch. AVT5590 B
Retired
No product available!
No product available!
Orange Pi ABS Transparent Protective Case for Orange Pi Plus 2e
Retired
No product available!
The device for automatic control of lighting or other electrical devices. Installed in place of an ordinary wall switch. He reacts to movement
Retired
No product available!
The OpenMV M7 Camera is a small, low-power microcontroller board that allows you to easily implement applications using machine vision in the real world. The best part about the OpenMV is that it is not only capable of image capture, but also face detection, color tracking, QR code reading and plenty more. SparkFun SEN-14186
Retired
No product available!
The SparkFun micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and SPI buses. This breakout board for the micro:bit’s edge connector allows to connect the micro:bit to breadboards and other sensors, motors, LEDs and more! BOB-13989
Retired
No product available!
No product available!
Camera for computer Banana Pi M2+, with sensor CMOS 5 Megapixels (OV5640). BPI-M2+ camera module
Retired
No product available!
Acrylic clear case with fan for Banana Pi M2+. The case needs to be assembled by yourself
Retired
No product available!
Printed circuit board and programmed soft start system for DC motors. AVT1955 A +
Retired
No product available!
No product available!
Base plate designed to work with TE0808 and TE0803 modules. It allows you to connect the module to external connectors and interfaces. TEBT0808-01
Retired
No product available!
Base plate for Trenz Electronics modules 4 x 5 cm, eg for TE0741. The board allows connecting to the module interfaces: USB, Ethernet, JTAG, UART. TE0703-05
Retired
No product available!
USB TO UART solution with USB Type A connector, Waveshare
Retired
No product available!
No product available!
Filament by PlastSpaw with an excellent quality-price ratio. Made of high-quality PLA granules. 1 kg of filament with a diameter of 1.75 mm is wound on the spool