- Out-of-Stock
AMERICAN DIGITAL OSCILLOSCOPE - SET ASSEMBLED AND STARTED
There is no need to convince any electronics about the benefits of having an oscilloscope. Kit AVT527 is a solution to the problem of the lack of funds for the purchase of factory equipment.
The oscilloscope is housed on a 115x70 mm printed circuit board. Presentation of measurement results and all settings are made from a PC connected to the input circuits. The device consists essentially of two essential elements: hardware and software. The first one is used to convert the tested waveform to digital data. Sent to a computer, they are properly processed and presented on the screen. In addition, the electronic system must synchronize the start of the next ones to be sampled at the same point of the periodic test. Thanks to this the chart does not move and is readable. The hardware part of the device is also responsible for proper communication with the computer.
The system is uncomplicated in assembly and easy to start.
The device is especially recommended for the studio of any electronics dealing with analogue and digital technology
Selected parameters of the oscilloscope:
Download
Manufacturer
Responsible person
Assembled system (half) of home automation - four-channel ON / OFF module. AVT3212 C
No product available!
The PCF8574 IO expansion board is an 8-bit I / O expander controlled by the I2C interface. Up to 8 PCF8574 IO expansion cards can be connected to the I2C bus, providing up to 64 I / O ports. Waveshare 3708
No product available!
MYIR MYS-7Z0007S-C - KIT is a set of elements with a single board computer based on the Xilinx XC7Z007S-1CLG400C (Zynq-7007S) system. This system consists of a single-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz and Artix-7 FPGA. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
No product available!
MYIR MYS-7Z0007S-C is a single board module based on the Xilinx XC7Z007S-1CLG400C chip (Zynq-7007S). This system consists of a single-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz and Artix-7 FPGA. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
No product available!
MYIR MYIR MYS-7Z010-LC is a set of elements with a single board computer based on the Xilinx XC7Z010-1CLG400C (Zynq-7010) system. This system consists of a dual-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
No product available!
MYIR Z-turn Lite MYS-7Z010-LCS is a single board module based on the Xilinx XC7Z010-1CLG400C (Zynq-7010) chipset. This system consists of a dual-core processor based on Cortex-A9 core, which can operate at a maximum frequency of 667 MHz. The computer is equipped with 512 MB of DDR3 SDRAM, 4 GB of eMMC memory and 16 MB of QSPI Flash memory
No product available!
Z-turn IO Cape extension board is an extension board for Z-turn series tiles based on Xilinx Zynq
No product available!
No product available!
OLED display 128x64 pixels, 0.96 ", 3V power supply, SSD1306 controller, communication via I2C and SPI interfaces, PARALLEL WHITE display color, working temperature from -40 to +70, ext. CAP
No product available!
ODROID-HC2 is a mini PC with Samsung Exynos5422 Cortex-A15 2Ghz and Cortex-A7 Octa core CPUs
No product available!
No product available!
The module contains an input for SD cards and MicroSD cards. Waveshare SD Storage Board
No product available!
No product available!
Waveshare AlphaBot, a basic set for building an Arduino-based robot
No product available!
IMU inertial sensor, 10-axis, barometer with temperature compensation, low energy consumption
No product available!
RTC clock module with DS1302 chip and battery socket
No product available!
AMERICAN DIGITAL OSCILLOSCOPE - SET ASSEMBLED AND STARTED