- Out-of-Stock
AVT2749 A +
ID: 190425
FOUR CHANNEL LIGHT CONTROLLER - PLATE AND PROGRAMMED LAYOUT
FOUR CHANNEL LIGHT CONTROLLER - PLATE AND PROGRAMMED LAYOUT
Producer: AVT
An extensive and modern version of the popular 'dimmer' bulbs. The system was designed based on a microprocessor, thanks to which it was possible to introduce a number of new functions and to increase the number of controlled light points from one to four. The device uses a phase control of light bulbs. The power reduction consists in the delayed activation of the actuator (triac) after the mains voltage has passed through zero.
In the system, the option of programming the so-called profiles or settings of lights. Activating them requires only selecting a specific combination of buttons.
The device is especially recommended for people who want to control the extended lighting of the living room
Selected parameters of the regulator:
- Smooth and independent control of the work (brightness) of four lamps
- the possibility of simultaneous regulation
- an additional relay for switching off the main lighting
- keyboard control, cooperation with any remote control working in the RC-5 code
- option to save up to ten own brightness profiles
- device status signaling - LED diodes
- Timer Fader function, ie automatic blanking to a preset level
- power supply - 230 V
- a printed circuit board, programmed layout and documentation in the set
A version with a set of components for self-assembly is available
- Detailed description in
Download
190425
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
Evaluation kit with RISC-V Dual Core 64bit clocked at 400 MHz. Equipped with 2 cameras, microphone, LCD display and microSD card slot. Everything is closed in a housing. Seeed Studio 102110463
Retired
No product available!
Development board based on GD32VF103CBT6 MCU with 32-bit RISC-V core. It is equipped with an IPS RGB LCD display with a diagonal of 0.96 inch 160x80 and a housing. Seeed Studio 102991302
Retired
No product available!
AI module with RISC-V Kendryte K210 chip, which can work with micro: bit, Arduino and Raspberry Pi. Equipped with a camera, microphone, speaker, IPS screen and Wi-Fi communication. Seeed Studio 101990646
Retired
No product available!
Evaluation kit with RISC-V Dual Core 64bit clocked at 400 MHz. Equipped with a camera and USB Type-C to M.2 adapter. Seeed Studio 102991335
Retired
No product available!
Starter kit for the micro:bit educational module. The kit includes an expansion module with Grove connectors, Grove modules and the necessary accessories. Seeed Studio 114991972
Retired
No product available!
A set for building a remotely controlled vehicle based on the micro:bit educational module. Seeed Studio 114991884
Retired
No product available!
The expansion module with 3 Grove connectors for the micro:bit educational module. Seeed Studio 114991850
Retired
No product available!
The expansion module with 6 Grove connectors for the micro:bit educational module. Seeed Studio 114991848
Retired
No product available!
A set for building a smartwatch based on the micro:bit educational module. It consists of an expansion board and a strap. Seeed Studio 114991969
Retired
No product available!
Silicone case designed for the micro:bit educational module. Blue color. Seeed Studio 114991668
Retired
No product available!
Minicomputer with Allwinner H2+ ARM Cortex-A7 4-core processor, Mali 400 MP2 GPU graphics card, 512 MB RAM, 8 GB eMMC, WiFi, BT 4.0 and numerous connectors. Banana Pi BPI-P2 Zero
Retired
No product available!
3D stereo camera module, which was built of two cameras with Sony IMX219 sensor and IMU ICM20948 sensor. Designed to work with Jetson Nano and Xavier NX. Seeed Studio 114992270
Retired
No product available!
20-pin straight goldpin female connector with a pitch of 2 mm. For THT mounting. PB20S_2.00mm
Retired
No product available!
Minicomputer with Allwinner H3 quad-core processor and 512 MB RAM. It has a WiFi and BT module, two Ethernet ports, 2 USB 2.0 ports and a microUSB and a microSD slot. FriendlyELEC NanoPi R1
Retired
No product available!
Minicomputer with Allwinner H3 quad-core processor and 1 GB RAM. It has a WiFi and BT module, two Ethernet ports, 2 USB 2.0 ports and a microUSB and a microSD slot. FriendlyELEC NanoPi R1
Retired
No product available!
Metal case for NanoPi R1 minicomputer. The set includes an external WiFi antenna
Retired
No product available!
FOUR CHANNEL LIGHT CONTROLLER - PLATE AND PROGRAMMED LAYOUT