AVT553 / R232 A

The two-channel signal generator offers a frequency range of up to 15MHz for square and triangle waves and up to 6MHz for pulses and arbitrary waves. The device provides high precision with a frequency accuracy of 20ppm and stability of 1ppm/3h, as well as pulse width adjustment functions and an amplitude resolution of 1mV. JDS2900-15

The two-channel signal generator supports a frequency range of up to 30MHz for a sine wave and allows for precise adjustment of signal parameters. The device is characterized by high accuracy, resolution of 14 bits per wave and output impedance of 50Ω. JDS2900-30

The two-channel signal generator offers a frequency range of up to 40MHz for sine waves and up to 25MHz for square and triangle waves. It is characterized by high precision, a wide range of parameter adjustments and an output impedance of 50Ω. JDS2900-40

The dual-channel signal generator offers a frequency range up to 50MHz with a variety of waveform types and high precision down to 0.01uHz. It is characterized by exceptional stability, 14-bit waveform resolution and a 50Ω output impedance. JDS2900-50

The two-channel DDS signal generator supports a frequency range of up to 15MHz with a precision of up to 0.01uHz and DDS technology ensures signal stability. The device offers 12-bit vertical resolution, 1mV amplitude resolution and 50Ω output impedance. Junctek JDS6600-15

The two-channel DDS signal generator with a range of up to 30MHz offers precise signal generation with DDS technology and a resolution of up to 0.01uHz. The device has 12-bit vertical resolution, 1mV amplitude resolution and an output impedance of 50Ω. Junctek JDS6600-30

A two-channel DDS signal generator with a range of up to 40MHz ensures precise signal generation thanks to DDS technology with an accuracy of 0.01uHz. The device offers 12-bit vertical resolution, 1mV amplitude resolution and 50Ω output impedance, making it irreplaceable in electronics laboratories. Junctek JDS6600-40

A two-channel DDS signal generator with a range of up to 50MHz ensures precise signal generation with exceptional stability and resolution. The device supports various wave types, offers 12-bit vertical resolution, 1mV amplitude resolution and is an essential tool for professional electronics laboratories.

The two-channel DDS signal generator with a frequency of 60MHz enables the generation of various waveforms, from a sine wave with a range of up to 60MHz to a pulse wave with a range of up to 6MHz. The device is distinguished by a precise frequency resolution of 0.01uHz, stability of 1ppm/3h and 12-bit waveform resolution. Junctek JDS6600-60

Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 4.4 GHz. Equipped with an LCD display, it can be connected to a computer via USB. Nanovna V2 4"

Vector network analyzer with two ports. It can perform measurements for frequencies from 50 kHz to 3 GHz. Equipped with an LCD display, it can be connected to a computer via USB. NanoV2 3.2"

SDR (Software Defined Radio) receiver that allows you to receive signals in the frequency range from 10 kHz to 1 GHz. It is ideal for both monitoring low frequencies and receiving signals on higher bands

Thermal imaging camera module with an MLX90640 infrared sensor and a 2.8" TFT LCD display. It offers an accuracy of 2°C and a viewing angle of 55°x35°.

Li-Fe battery monitor that can measure voltage, current, power during charging and discharging, and watt-hours consumed and run time. The user can use a mobile application and a computer to control the measuring module. Juntek KG110F

Antenna dedicated to communication in LoRa networks in the 868 MHz frequency band. Equipped with an RP-SMA connector. SparkFun WRL-18083

Visible spectrum emitter module that combines 9 discrete LEDs covering visible light wavelengths from 455 to 720 nm. It uses Qwiic connectors and I2C communication as well as a USB type C socket to power the module. SparkFun SPX-21316