- Out-of-Stock
AVT3024 B
ID: 193223
CONDUCTOR IR REMOTE CONTROLLER LIGHT CONTROLLER - KIT FOR INDEPENDENT INSTALLATION
CONDUCTOR IR REMOTE CONTROLLER LIGHT CONTROLLER - KIT FOR INDEPENDENT INSTALLATION
Producer: AVT
The system has a number of advanced functions - in addition to turning the light source on and off, it is possible to smoothly adjust its brightness - via the remote control. Cooperation is not limited to transmitters working in the RC5 code. The reception procedures are written in C language, which makes it possible to easily add almost any ZS remote control. The lighting controller recognizes with which type of device it works, it also has protection against the reaction to infrared signals encoded in a standard other than the codes provided by the programmer. The switching off and switching on of the light is controlled by separate buttons, unlike in some factory constructions (where switching off means 'turn off' to the minimum).
The device is especially recommended to all those who like convenience, and in places where the lighting switch is far away from users
Selected parameters of the controller:
- control of any infrared remote control
- the 'learning' function of the controller
- operating the lamp with four buttons (on / off, bright / dark)
- galvanic separation from the high voltage part
- phase adjustment of the bulb
- power supply - 230 V
- in the set a printed circuit board, a set of elements and documentation
- Detailed description in EdW 5/03
Download
193223
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
Dispensing needle for precise application of glue, flux with an internal diameter of 0.19mm and an external diameter of 0.35mm.
Retired
No product available!
Interactive robot construction kit. based on the ESP32-S module. It can be controlled from a mobile application available on devices with Android and iOS. Additionally, it can connect to a computer via WiFi network and be programmed in Scratch and Arduino IDE. ArduCAM K0075
Retired
No product available!
A network card that supports two WiFi frequency bands (2.4GHz and 5GHz) with a USB connector. It allows you to connect devices without an internal network adapter to the WiFi network. TP-LINK AC600
Retired
No product available!
Integrated capacitive fingerprint sensor communicating with the external system via the UART interface. The module has a rectangular sensor field and downloads a fingerprint image with a resolution of 508dpi. Waveshare UART Fingerprint Sensor (R)
Retired
No product available!
Sipeed MAIX Bit is a RISC-V 64 development board for AI + IoT applications. Seeed Studio 110991190
Retired
No product available!
Based on MAIX Module, the Maixduino is a RISC-V 64 development board for AI + IoT applications. Seeed Studio 110110044
Retired
No product available!
Module with 12.48" e-Paper display and 1304x984 px resolution. Communicates with external systems via the SPI interface. It has low power consumption and a wide viewing angle. Waveshare 12.48inch e-paper Module
Retired
No product available!
RoboClaw 2x60AHV Motor Controller (V7C) is a two-channel DC motor driver, operating voltage: 10,5 to 60V, maximum continuous current: 60A, the ability to easily implement feedback loops with PID controller, security systems. Pololu 3583
Retired
No product available!
Gate driver in uWiFi technology with extended range, with application for Android/iOS. BleBox GateBoxPro
Retired
No product available!
Camera module with MT9J003 sensor cooperating with ArduCam USB Shield. The maximum video resolution is 3856x2764 pixels. LS-18023 lens mount possible. ArduCam A0096
Retired
No product available!
A 150mm 2-wire cable terminated terminated with a plug and socket JST XH2.54.. 22AWG cable diameter.
Retired
No product available!
Digital microscope with 3" LCD display and HDMI output. The microscope is equipped with a 3MPx image sensor with a magnification factor up to 300 times. Andonstar ADSM201
Retired
No product available!
120W power supply, 24VDC output voltage and 5A output current. Mounting on a DIN rail. Built-in overload and short circuit protection. MEAN WELL DR-120-24
Retired
No product available!
A hand-held thermal imaging camera with a 2.4" LCD screen. It measures the temperature in the range from -20 to 300°C. HTI HT-02D
Retired
No product available!
LCD display with LED backlight (white), negative blue, 2x20, with extended temperature range, meeting the requirements of RoHS
Retired
No product available!
Four-wheeled chassis for self-assembly. The kit contains all the necessary mechanical elements that are needed to build this type of structure. SeeedStudio Robot car Kit- RC Smart Car Chassis Kit
Retired
No product available!
CONDUCTOR IR REMOTE CONTROLLER LIGHT CONTROLLER - KIT FOR INDEPENDENT INSTALLATION