- Out-of-Stock
AVT938 B
ID: 193365
EMERGENCY LIGHTING CONTROLLER - INDEPENDENT INSTALLATION KIT
EMERGENCY LIGHTING CONTROLLER - INDEPENDENT INSTALLATION KIT
Producer: AVT
Controller for emergency and back-up lighting. The system is incorporated into the existing 12V halogen lighting system. One of the bulbs always lights up when the mains supply is lost. The controller is powered from a battery-backed power supply.
The system is perfect for rural areas, wherever there are still power off. After 230 V mains failure, automatic switching to buffer supply takes place.
The device is especially recommended in areas prone to switching off the electric current
Selected parameters:
- 230 V basic power supply
- emergency power supply 12 V
- the system controls emergency and buffer lighting
- built-in power supply for emergency lighting
- seven different work modes
- galvanic separation from 230 V mains
- load capacity of OUT 350 W output
- load capacity of the RESERVE 50 W output
- load capacity AWARIA 1 W
- power supply - 12 Vdc
- in the set a printed circuit board, a set of elements and documentation
A detailed description in EP7 / 06 or
193365
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Other products in the same category (16)
3-color e-Paper display with a diagonal of 7.5 "and a resolution of 640x384 px. SPI interface. No PCB. Waveshare 7.5inch e-Paper (C)
Retired
No product available!
AVT kit for self-assembly protection - a simple car lock. AVT3187 B
Retired
No product available!
DCC CONTROLLER THE RAILWAY UNPRODUCTION CABLE - PLATE PCB AND PROGRAMMED SYSTEM
Delivery date unknown
No product available!
No product available!
Camera module for Raspberry Pi minicomputers with IR-CUT filter. Equipped with an OV5647 (5 MPx) sensor, it supports image acquisition both during the day and at night. Waveshare 15203
Retired
No product available!
No product available!
Large format industrial 3D printer with touch display, heated table and USB, WiFi and Cloud support. The printer is fully assembled and ready to use. Flashforge Guider II
Retired
No product available!
No product available!
Soldering iron station with a power of 60 W, temperature control in the range from 90°C to 480°C. The set includes rosin and tip cleaner. WEP 926LED V3 Blue
Retired
No product available!
6x1 F-F 6" Cable for ShiftBrites and ShiftBars
Retired
No product available!
CC2530 and CC2540 programming cable for Open Debugger Burn Board and Banana Pi G1 connection
Retired
No product available!
No product available!
The fan designed for use with the Digilent ZYBO Z7-20 plate mounted on the heat sink allows better air flow, which results in lowering the FPGA temperature. The fan has a 3-pin connector, the supply voltage is 5 V. In addition to the fan, there are screws for fixing. Digilent 240-130
Retired
No product available!
NVIDIA\'s Jetson TX1 is an embedded system-on-module (SoM) with quad-core ARM Cortex-A57, 4GB LPDDR4 and integrated 256-core Maxwell GPU. Useful for deploying computer vision and deep learning, Jetson TX1 runs Linux and provides 1TFLOPS of FP16 compute performance in 10 watts of power. Jetson TX1 Development Kit
Retired
No product available!
Platform with the AD9364 radio transmitter and receiver and the Xilinx Spartan-6 XC6SLX150 FPGA chip. Digilent 6002-410-021
Retired
No product available!
No product available!
EMERGENCY LIGHTING CONTROLLER - INDEPENDENT INSTALLATION KIT