- Out-of-Stock
The driver of the vehicle cabin lighting lamp extends the time of its lighting when the door is closed. This allows you to conveniently insert the key into the ignition and fasten the seat belts. The lamp illuminates for about half a minute and then it is gradually turned off. However, if the ignition is switched on in the meantime, the interior lighting is switched off immediately.
The controller has additional functions. When you open the door, the light in the cabin turns on smoothly. The light is also switched on after switching off the engine (switching off the ignition switch) as long as the parking lights have been switched on. The device is equipped with the function of protecting the battery against discharging. If the vehicle door remains open, the interior lamp is extinguished after approx. 2.5 minutes. The control LED (flashing at a frequency of about 1 Hz), in addition to signaling the correct operation of the device can simulate the operation of the alarm.
The device is especially recommended for owners of older car models as well as those electronic engineers who want to explore the secrets of PWM steering
Selected parameters of the controller:
Download
Manufacturer AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
Responsible person AVT SPV Sp. z o.o. Leszczynowa 11 03-197 Warszawa Poland zamowienia@avt.pl
RGB LED 32 x 32 display module (1024 LEDs). Refresh rate 1: 8. It has two IDC connectors, which allows you to connect multiple displays in series. SparkFun SPX-14633
No product available!
TFMini is a small laser rangefinder with a measuring range of 0.3 to 12 meters. The measurement resolution is 5 mm. ToF technology (Time of Flight) is used for measurement. Communication with the sensor takes place via the UART interface. SparkFun SEN-14588
No product available!
GraspIO Cloudio is HAT for use with Raspberry Pi. It allows creating many interesting IoT projects. It is based on the ATmega 32U4 microcontroller. It has an OLED display, an IR receiver, a light sensor, a temperature sensor, an RGB LED and a buzzer. CLOUDIO-SMRTDEV-R-V1
No product available!
No product available!
BleBox AirSensor is an air quality sensor informing about the presence of harmful dust (PM1, PM2,5, PM10) suspended in the home and outside.
No product available!
SparkFun BlackBoard is a base plate compatible with Arduino. It is equipped with Atmega 328P microcontroller. It has 14 I / O lines (including 6 PWM channels) and 6 analogue inputs. It has a connector in accordance with the Qwiic standard. SparkFun SPX-14669
No product available!
SparkFun Papa Soundie Audio Player is a board with ATmega328P microcontroller and VS1000D chip, which allows you to play sounds (in OGG Vorbix and WAV format) stored on a microSD memory card. The board has a 3.5 mm jack connector. SparkFun DEV-14554
No product available!
No product available!
Printed circuit board and programmed solar collector differential controller. AVT5621 A +
No product available!
AVT kit for self-assembly of the solar collector differential controller. AVT5621 B
No product available!
Assembled solar collector differential controller. AVT5621 C
No product available!
Printed circuit board and programmed countdown timer system. AVT5622 A +
No product available!
AVT set for self-assembly of the countdown clock. AVT5622 B
No product available!
No product available!
Printed circuit board and programmed layout for the Arduino learning board. AVT5636 A +
No product available!
AVT kit for self-assembly of the educational board for Arduino. AVT5636 B
No product available!